ckaaaa.txt 12 Dec 2001 C-KERMIT VERSION 8.0.200 OVERVIEW OF FILES Communications software for UNIX and (Open)VMS. And in former versions also for: Stratus VOS, AOS/VS, QNX, Plan 9, OS-9, Apollo Aegis, and the Commodore Amiga. The Apple Macintosh, the Atari ST. Copyright (C) 1985, 2001, Trustees of Columbia University in the City of New York. All rights reserved. See the C-Kermit COPYING.TXT file or the copyright text in the ckcmai.c module for disclaimer and permissions. DOCUMENTATION C-Kermit is documented in the book "Using C-Kermit", Second Edition, by Frank da Cruz and Christine M. Gianone, Digital Press, ISBN 1-55558-164-1. QUICK START FOR FTP USERS If you have a Web browser, go to: http://www.columbia.edu/kermit/ckermit.html And take it from there. Otherwise... The definitive FTP source for Kermit software is kermit.columbia.edu. Kermit software obtained from other FTP sites is not necessarily complete or up to date, and may have been modified. C-Kermit for UNIX computers that have a C compiler and 'make' program: Directory kermit/archives, binary mode, file cku200.tar.Z or cku200.tar.gz This is a compressed tar archive of UNIX C-Kermit source code, makefile, and other files. It unpacks into its current directory, so download it into a fresh directory. Transfer in binary mode, uncompress (or gunzip), untar (tar xvf cku200.tar), and then give the appropriate "make" command to build for your UNIX system; read the comments in the makefile and ckuins.txt for further info. C-Kermit for VMS: If you have VMS UNZIP, get the file kermit/archives/ckv200.zip in binary mode, unzip, and build with CKVKER.COM. Others: In the kermit/f or kermit/test directories under the appropriate prefixes, explained below. INSTALLATION Installation procedures depend on the system. Please read the CK?INS.TXT, if any, file for your system (?=U for UNIX, V for VMS, etc). Please note the naming and placement for the initialization files: CKERMIT.INI The standard initialization file. Please leave it as is unless you know what you are doing and (if you are changing it or replacing it for others to use) you are prepared to support it. Rename this file to .kermrc in UNIX, OS-9, BeBox, or Plan 9. In Stratus VOS, rename it ckermit.ini (lowercase). On multiuser systems, it goes either in the (or EACH) user's home (login) directory, or else in a common shared place if C-Kermit has been configured to look in that place (see ckccfg.txt for details). CKERMOD.INI A *sample* customization file. On multiuser OS's, a copy of this file goes in each user's home directory, and then each user edits it to suit her needs and preferences; e.g. by defining macros for their common connections. DIALING DIRECTORIES Dialing directory files can be system-wide, per-group, or per-user, or any combination. For example, there can be a corporate wide directory shared by all users, a supplemental directory for each division or department, and a personal directory for each user. Simply be sure the dialing directory files are identified a SET DIAL DIRECTORY command in the user's (or the system-wide) C-Kermit initialization file, or in the environment variable (logical name, symbol) K_DIAL_DIRECTORY. (The standard initialization file looks by default in the user's home or login directory.) When installing C-Kermit on multiuser platforms from which users will dial out, you can also set environment variables for area code, country code, and the various dialing prefixes as described on page 478 of "Using C-Kermit" (second edition), so users don't have to worry about defining these items themselves. Network directories and service directories can also be set up in a similar manner. DOCUMENTATION In UNIX, the general C-Kermit man page (or one of the versions tailored for a specific platform, like HP-UX or Solaris) should be installed in the appropriate place. In VMS, the VMS help topic (CKVKER.HLP) should be installed as described in CKVINS.TXT. Plain-text documentation such as CKERMIT2.TXT should be put in whatever place people are accustomed to looking. FILES AND FILE NAMING CONVENTIONS C-Kermit is a family of Kermit programs for many different computer systems. The program shares a common set of system-independent file transfer protocol modules, written in the C language. System-dependent operations are collected into system-specific modules for each system. C-Kermit file names all start with the letters "CK", followed by a single letter indicating the subgroup. When referring to these files in the UNIX, AOS/VS, or VOS environments, use lowercase letters, rather than the uppercase letters shown here. Subgroups: A: General descriptive material and documentation B: BOO file encoders and decoders (obsolete) C: All systems with C compilers D: Data General AOS/VS E: Reserved for "ckermit" files, like CKERMIT.INI, CKERMIT2.TXT F: (reserved) G: (reserved) H: (reserved) I: Commodore Amiga (Intuition) J: (unused) K: (unused) L: Stratus VOS M: Macintosh with Mac OS N: Microsoft Windows NT O: OS/2 and/or Microsoft Windows 95/98/NT P: Bell Labs Plan 9 Q: (reserved) R: DEC PDP-11 with RSTS/E (reserved) S: Atari ST GEMDOS (last supported in version 5A(189)) T: DEC PDP-11 with RT-11 (reserved) U: UNIX or environments with UNIX-like C libraries V: VMS and OpenVMS W: Wart (Lex-like preprocessor, used with all systems) X: Build lists (most recent build for each platform), e.g. ckx200.txt. Y: (reserved) Z: (reserved) 0-3: (reserved) 4: IBM AS/400 5-8: (reserved) 9: Microware OS-9 Examples (use lowercase on UNIX, VOS, or AOS/VS): ckaaaa.txt - This file ckufio.c - File i/o for UNIX ckstio.c - Communications i/o for the Atari ST makefile - makefile for building UNIX C-Kermit ckpker.mk - makefile for building Plan 9 C-Kermit ckvker.com - build procedure for VMS C-Kermit IMPORTANT FILES (use lowercase names on UNIX, VOS, or AOS/VS): ckaaaa.txt - This file (overview of the C-Kermit files). For system-specific distributions, this will normally be replaced by a system-specific READ.ME file. ckermit70.txt - Updates: Supplement to "Using C-Kermit", 2nd Ed, for 7.0. ckermit80.txt - Updates: Supplement to "Using C-Kermit", 2nd Ed, for 8.0. ckututor.txt - C-Kermit Tutorial for Unix (plain text) ckcbwr.txt - "Beware file" (limitations, known bugs, hints), general. ckermit.ini - Standard initialization file (rename to .kermrc in UNIX, OS-9) ckermod.ini - Sample customization file (rename to .mykermrc in UNIX, OS-9) The following can be found at the Kermit FTP site: ckermit.kdd - Sample dialing directory file (rename to .kdd in UNIX, OS-9) ckermit.knd - Sample dialing directory file (rename to .knd in UNIX, OS-9) ckermit.ksd - Sample services directory file (rename to .ksd in UNIX, OS-9) ckedemo.ksc - Demonstration macros from "Using C-Kermit" ckepage.ksc - Ditto ckevt.ksc - Ditto UNIX-specific files: ckuins.txt - UNIX-specific installation instructions. ckubwr.txt - UNIX-specific beware file. ckuker.nr - "man page" for UNIX. VMS-specific files: ckvins.txt - VMS-specific installation instructions. ckvbwr.txt - VMS-specific beware file ckvker.hlp - VMS C-Kermit HELP topic (needs updating). DG AOS/VS-specific files: ckdins.txt - Data General AOS/VS C-Kermit installation instructions ckdbwr.txt - AOS/VS "beware" file ckd*.cli - Procedures for building AOS/VS C-Kermit The following files are of interest mainly to programmers and historians (find them at the Kermit ftp site): ckcker.ann - Release announcements. ckccfg.txt - Configuration information (feature selection), general. ckcplm.txt - Program logic manual (for programmers). ckc200.txt - Program update history for edit 198-200 (big) ckc197.txt - Program update history for edit 195-197 (big) ckc190.txt - Program update history for edits 189-190 (big). ckc188.txt - Program update history, edits 179-188 (big). ckc178.txt - Program edit history, 5A edits through 178 (very big). ckcv4f.txt - Program edit history, version 4F. ckcv4e.txt - Program edit history, version 4E. BINARIES If you have FTP access to kermit.columbia.edu (also known as kermit.cc.columbia.edu, ftp.cc.columbia.edu), you can also retrieve various C-Kermit binaries from the directory kermit/bin/ck*.*, or more conventiently from the web page: http://www.columbia.edu/kermit/ck80binaries.html Test versions would be in kermit/test/bin/ck*.*. Be sure to transfer these files in binary mode. The READ.ME file in that directory explains what's what. SOURCE FILES The source files for the UNIX version (all UNIX versions) are available in kermit/archives/ckuNNN.tar.Z, approximately 1MB in size. Transfer this file in binary mode. This is a compressed tar archive. There is also a gzip'd version, cku200.tar.gz. To get the binary tar archive: mkdir kermit (at shell prompt, make a Kermit directory) cd kermit (make it your current directory) ftp kermit.columbia.edu (make an ftp connection) user: anonymous (log in as user "anonymous", lower case!) password: (use your email id as a password) cd kermit/archives (go to the archives directory) type binary (specify binary file transfer) get cku200.tar.Z (get the tar archive) (or get cku192.tar.gz) bye (disconnect and exit from ftp) uncompress cku200.tar.Z (at the shell prompt, uncompress the archive) tar xvf cku200.tar (extract the files from the tar archive) make xxx (build C-Kermit for your system) (where "xxx" is the makefile entry appropriate for your system.) All C-Kermit source and other text files are also kept separately in the kermit/f directory. The files necessary to build a particular implementation of C-Kermit are listed in the appropriate makefile or equivalent: UNIX: makefile (or rename ckuker.mak to makefile) 2.11 BSD: ckubs2.mak (rename to makefile), ckustr.sed Plan 9: ckpker.mk (rename to mkfile) Macintosh: ckmker.mak (rename to kermit.make, use MPW C 3.2) VMS: CKVKER.COM (DCL) (and optionally also CKVKER.MMS) or CKVOLD.COM (for VMS 4.x) Amiga: CKIKER.MAK (Aztec C) or CKISAS.MAK (SAS C) Atari ST: CKSKER.MAK OS-9: ck9ker.mak or ck9ker.gcc AOS/VS: ckdmak.cli, ckdcc.cli, ckdlnk.cli Stratus VOS: cklmak.cm Minimal source files for building selected versions (these patterns get all the files you need, and in some cases maybe a few extra): UNIX: ck[cuw_]*.[cwh] (including QNX, Plan 9, and BeBox) VMS: ck[cuwv]*.[cwh] Mac: ck[cuwm]*.[cwhr] AOS/VS: ck[cuwd]*.[cwh] VOS: ck[cwhl]*.[cwh] Amiga: ck[cuwi]*.[cwh] Atari: ck[cuws]*.[cwh] OS-9: ck[cuw9]*.[cwha] For a detailed, specific source file list for this C-Kermit release, see the file ckcxxx.txt, where xxx is the current C-Kermit edit number, such as 200. Finally, here is a more detailed description of the C-Kermit file naming conventions. A C-Kermit filename has the form: CK. where: is described earlier in this file; is the file type (use lowercase on UNIX, VOS, or AOS/VS): c: C language source h: Header file for C language source w: Wart preprocessor source, converted by Wart (or Lex) to a C program r: Macintosh resource file (8-bit text) a: Assembler source txt: Plain text. nr: Nroff/Troff text formatter source for UNIX "man page" mss: Scribe text formatter source ps: Typeset material to be printed on a PostScript printer hlp: A VMS Help topic ini: Initialization file ksc: A Kermit Script to be executed by the TAKE command kdd: A Kermit Dialing Directory knd: A Kermit Network Directory ksd: A Kermit Services Directory mak: A Makefile or other build procedure (often needs renaming) com: (VMS only) a DCL command procedure cli: (AOS/VS only) a command procedure cmd: (OS/2 only) a Rexx command procedure boo: "boo"-encoded executable program, decode with CKBUNB program. hex: "hex"-encoded executable program, decode with CKVDEH program (VMS only). hqx: BinHex'd Macintosh Kermit program, decode with BinHex version 4.0. uue: A uuencoded binary file, decode with uudecode or (DG only) CKDECO. def: An OS/2 linker definitions file. sed: A UNIX sed (editor) script. str: A file of character strings extracted from C-Kermit (BSD 2.1x). is mnemonic (up to 3 characters) for what's in the file: NOTE: After C-Kermit 6.0, text filetypes such as .DOC and .HLP were changed to .TXT to avoid confusion in Windows-based Web browsers, which would otherwise mistake them for Microsoft Word or Windows Help documents. aaa: A "read-me" file, like this one ins: Installation instructions or procedures bwr: "Beware" file -- things to watch out for, hints and tips ker: General C-Kermit definitions, information, documentation nnn: Digits: C-Kermit edit number (e.g. cku200.tar.gz) cmd: Command parsing con: CONNECT command cns: CONNECT command (UNIX only - version that uses select(), not fork()) deb: Debug/Transaction Log formats, Typedefs dia: Modem/Dialer control fio: System-depdendent File I/O fns: Protocol support functions fn2: More protocol support functions (and FN3, ...) lib: Common library routines module mai: Main program net: Network i/o module pro: Protocol scr: SCRIPT command tel: Telnet protocol module tio: System-dependent communications i/o & control and interrupt handing sig: Signal handling module usr: Interactive/script user interface us2: More user interface (mainly help text) us3: Still more user interface (and USR4, USR5, USR6, USR7) usx: Common user interface functions usy: Command-line parsing xla: Character set translation module uni: Unicode support pty: Pseudoterminal support mdb: Malloc-debugging module (not included in real builds) str: Strings module (only for 2.xBSD) (End of ckaaaa.txt)