VENTI2, PANDA TOPS-20 Monitor 7.1(21746)-5
@slogin
 Job 14 on TTY23 25-Nov-2023 21:58:57
  Last interactive login 25-Nov-2023 21:57:58
  Last non-interactive login 25-Nov-2023 21:58:56
[Jobs 8, 9, 10, 11, 12, 13(DET), 15 also logged in under SLOGIN]
 End of LOGICALS.CMD.94
 End of TTY.CMD.8
 End of LOGIN.CMD.19
 End of COMAND.CMD.14
@Terminal Ideal
@Terminal No Parity
@SMNT k20:
Structure STAR: mounted
@Get PS:<UNSUPPORTED>Kermit
@Info Ver
 VENTI2, PANDA TOPS-20 Monitor 7.1(21746)-5
 PANDA TOPS-20 Command processor 7.1(4456)-5
 Program is KERMIT, version is 4.2(256)
@Start
TOPS-20 KERMIT version 4.2(256)

Kermit-20>Set Prompt Remote-Kermit-20>
Remote-Kermit-20>Set 94
Remote-Kermit-20>Set Flow None
Remote-Kermit-20>Set Debugging Packets
Remote-Kermit-20>Log Debugging KT:K20RDC-REMOTE-OLD-PACKETS.LOG
Remote-Kermit-20>Show Line

TTY for file transfer:  23
 (job's controlling terminal, KERMIT-20 is REMOTE)
  Handshake:        None
  Flow-Control:     None
  Parity:           None
  Duplex:           Full
  Speed:            (Unknown)
  Break Simulation: Disabled
  TVT Binary:       Off
  Log:              (none)

Remote-Kermit-20>Show Debugging

Debugging: Packets
  Debugging log file: STAR:<KERMIT.TESTING>K20RDC-REMOTE-OLD-PACKETS.LOG.4, bytesize 7

Remote-Kermit-20>Show Packet

Packet parameters:

              Inbound         Outbound  
  Size:            94		94 characters
  Padding:         0		0
  Pad Character:   ^@		^@
  End-Of-Line:     ^M		^M
  Control Prefix:  #		#
  Start-Of-Packet: ^A		^A

              Requested       Used
  8th-bit Prefix:  (none)       (none)
  Repeat Prefix:   ~		(none)    
  Block Check:     1		1

Remote-Kermit-20>Show Timing

Timing parameters:

              Receive         Send
  Timeout:         13		20-94 sec
  Pause:           0		0 sec

Delay before sending first packet:  10 sec
Packet retries before timeout:      10
Number of retries for init packet:  9
Server sends NAKs every 30 sec while waiting for command.

Remote-Kermit-20>
Remote-Kermit-20>SERVER

 Kermit Server running on DEC-20 host.  Please type your escape
 sequence to return to your local machine.  Shut down the server By 
 typing the BYE command to KERMIT on your local machine.
@
@Info Fork
 => KERMIT (1): HALT at CONT, 0:00:00.6
@Reset *
@
@Get K20:Kermit
@Info Ver
 VENTI2, PANDA TOPS-20 Monitor 7.1(21746)-5
 PANDA TOPS-20 Command processor 7.1(4456)-5
 Program is KERMIT, version is 5.3(248)-5
PDVs:	Program name K20MIT, version 5.3(248)-5
@Start
TOPS-20 Kermit version 5.3(248)-5

Kermit-20>Set Prompt Remote-Kermit-20>
Remote-Kermit-20>Set 94
Remote-Kermit-20>Set Flow None
Remote-Kermit-20>Show Line

TTY for file transfer:  23
 (job's controlling terminal, KERMIT-20 is REMOTE)
  Handshake:	    None
  Flow-Control:     None
  Parity:	    None
  Duplex:	    Full
  Break Simulation: Disabled
  Controlling Type: PTY [Parity]
  Input Buffers:    1
  Output Buffers:   1

Remote-Kermit-20>Show Debugging

Debugging: Off

Remote-Kermit-20>Show Packet

Packet parameters:

	      Inbound	      Outbound
  Size:		   94		94
  End-Of-Line:	   ^M		^M
  Control Prefix:  #		#
  Start-Of-Packet: ^A		^A

	      Requested       Used
  8th-bit Prefix:  (none)	(none)
  Repeat Prefix:   ~		(none)
  Block Check:	   1		1

Remote-Kermit-20>Show Timing

Timing parameters:

	      Receive	      Send
  Timeout:    20.0000      20.0000 sec (94 max)
	        20000	     20000 ms

  Pause:       (none)       (none)

  Delay before sending first packet:  10 secs (10000 ms)
  Packet retries before timeout:      10
  Number of retries for init packet:  9
  Server sends NAKs every 30 secs (30000 ms)

Remote-Kermit-20>
Remote-Kermit-20>SERVER

 Kermit Server running on VENTI2 host.  Please type your escape
 sequence to return to your local machine.  Shut down the server By
 typing the BYE command to KERMIT on your local machine.
@
@Info Fork
 => KERMIT (1): HALT at CONTIN, 0:00:00.4
@LogoUt
[Jobs 8, 9, 10, 11, 13(DET), 15 also logged in Under SLOGIN]
Logged oUt Job 14, User SLOGIN, TTY23, at 25-Nov-2023 21:59:14
 Used 0:00:01 in 0:00:17