# SSH Support in C-Kermit for Windows

C-Kermit for Windows now includes built-in SSH support based on libssh^1. This is still a work-in progress so not all SSH commands supported by Kermit 95 are available in CKW at this time and bugs are likely. If you find a bug, please report it!

To get started, type `help ssh` at the kermit prompt but note that not all commands are implemented yet! Full documentation for the built-in SSH client as delivered in Kermit 95 v2.1.3 is available here: https://kermitproject.org/k95manual/sshclien.html - SSH differences between Kermit 95 and C-Kermit for Windows are discussed later in this document.

For convenience C-Kermit currently looks for the known_hosts file as well as your public and private keys in `%USERPROFILE%\.ssh`. This directory is also used by the version of OpenSSH bundled with Windows 10+ so if you were previously using that your keys and known hosts should be picked up automatically by C-Kermit.

## Known Issues

- When connecting to modern linux hosts with the linux terminal type, you'll likely need to set your remote charset to utf8. You can do this with: `set term type linux set term remote utf8` For convenience, you can just uncomment these lines in the default `k95custom.ini` file included in the CKW distribution so that they're run every time you start C-Kermit.
- If you find your session disconnecting when left idle, try enabling the heartbeat feature with the `set ssh heartbeat-interval` command.
- Connecting through proxy servers is not currently supported

## Differences From Kermit 95

The `set ssh v2 authentication` command only works to turn methods on or off at this time, it does not affect the order in which authentication methods are attempted. This may be corrected in a future release.

The GUI dialogs for the `ssh key` commands have also been adjusted a little. When GUI dialogs are enabled, these commands will use a standard Windows file dialog rather than having you type in a full pathname if a filename was not specified as part of the command.

### New Command Options

These commands are unchanged aside from having some new options. Some options that were supported in Kermit 95 may have been removed.

    set ssh v2 hostkey-algorithms {ecdsa-sha2-nistp256, ecdsa-sha2-nistp384, ecdsa-sha2-nistp521, rsa-sha2-256, rsa-sha2-512, ssh-ed25519}
    set ssh v2 macs {hmac-sha1-etm@openssh.com, hmac-sha2-256, hmac-sha2-256-etm@openssh.com, hmac-sha2-512, hmac-sha2-512-etm@openssh.com, none}

### New Commands

The following commands are new to C-Kermit for Windows and so not documented in the Kermit 95 manual.

    set ssh v2 key-exchange-methods {CURVE25519-SHA256,
         CURVE25519-SHA256@LIBSSH.ORG, DIFFIE-HELLMAN-GROUP1-SHA1,
         DIFFIE-HELLMAN-GROUP14-SHA1, DIFFIE-HELLMAN-GROUP14-SHA256,
         DIFFIE-HELLMAN-GROUP16-SHA512, DIFFIE-HELLMAN-GROUP18-SHA512,
         DIFFIE-HELLMAN-GROUP-EXCHANGE-SHA1,
         DIFFIE-HELLMAN-GROUP-EXCHANGE-SHA256, ECDH-SHA2-NISTP256,
         ECDH-SHA2-NISTP384, ECDH-SHA2-NISTP521 }
      Specifies an ordered list of Key Exchange Methods to be used to generate
      per-connection keys. The default list is:

        curve25519-sha256 curve25519-sha256@libssh.org ecdh-sha2-nistp256
        ecdh-sha2-nistp384 ecdh-sha2-nistp521 diffie-hellman-group18-sha512
        diffie-hellman-group16-sha512 diffie-hellman-group-exchange-sha256
        diffie-hellman-group14-sha256 diffie-hellman-group14-sha1
        diffie-hellman-group1-sha1 ext-info-c}

### Removed Commands and Options

The following SSH commands and options have been removed because they are obsolete and not supported by libssh:

    set ssh version 1
    set ssh {kerberos4, kerberos5, krb4, kerb5, k4, k5}
    set ssh v1
    set ssh v2 authentication {external-keyex, hostbased, srp-gex-sha1}
    set ssh v2 ciphers {arcfour, blowfish-cbc, cast128-cbc, rijndael128-cbc, rijndael192-cbc, rijndael256-cbc}
    set ssh v2 macs {hmac-md5, hmac-md5-96, hmac-ripemd160, hmac-sha1-96}
    ssh key v1
    ssh key display /format:ietf
    ssh v2 rekey

### Not Yet Implemented (or removed)

The following commands have not been implemented yet. The intention is to eventually implement as many of these as possible but this comes down to what libssh will or will not support. Some will likely be removed entirely in future releases. At this time all of these commands just return an error or do nothing.

    SSH [OPEN] /X11-FORWARDING: {on,off}
    SSH ADD
        LOCAL-PORT-FORWARD local-port host port
        REMOTE-PORT-FORWARD remote-port host port
    SSH AGENT
        ADD identity-file
        DELETE identity-file
        LIST
            /FINGERPRINT
    SSH CLEAR
        LOCAL-PORT-FORWARD
        REMOTE-PORT-FORWARD
    SET SSH
        AGENT-FORWARDING {ON,OFF}
        CHECK-HOST-IP {ON,OFF}
        DYNAMIC-FORWARDING {ON,OFF}
        GATEWAY-PORTS {ON,OFF}
        IDENTITY-FILE filename
        PRIVILEGED-PORT {ON,OFF}
        QUIET {ON,OFF}
        V2 AUTO-REKEY {ON,OFF}
        X11-FORWARDING {ON, OFF}
        XAUTH-LOCATION filename

## Supported Authentication Methods

At this time password, public key and keyboard interactive authentication are implemented and work.

There is not yet support for using ssh agents or GSSAPI (Kerberos) authentication but as both of these are supported by the ssh backend used by C-Kermit support for these may appear in a future release.