#include #ifdef COMMENT #undef COMMENT #endif #include #define USE_HELP_CONTEXTS #define USE_WINDOW_MODEMS #define USE_WINDOW_NEW_MODEM #define USE_WINDOW_MODEM_CONFIG #include #include "dialer.hpp" #include "kmdmdlg.hpp" #include "kconnect.hpp" #include "usermsg.hpp" #include "kmodem.hpp" extern "C" { #include "ckcdeb.h" /* Typedefs, debug formats, etc */ #include "ckucmd.h" #if defined(WIN32) #include /* Windows Definitions */ #ifndef NODIAL #define TAPI_CURRENT_VERSION 0x00010004 #include #include extern struct keytab * tapilinetab, * _tapilinetab; extern int ntapiline; #include "ktapi.h" #endif /* NODIAL */ #endif #include "kmdminf.h" /* BEGIN MDMINF STRUCT DEFINITIONS */ /* Declare structures containing modem-specific information. REMEMBER that only the first SEVEN characters of these names are guaranteed to be unique. First declare the three types that are allowed for MINIDIAL versions. */ /* A dummy getok() */ int getok( int a, int b) { return a ; } #ifdef K95_1120_MODEMS static MDMINF CCITT = /* CCITT / ITU-T V.25bis autodialer */ /* According to V.25bis: . Even parity is required for giving commands to the modem. . Commands might or might not echo. . Responses ("Indications") from the modem are terminated by CR and LF. . Call setup is accomplished by: - DTE raises DTR (V.24 circuit 108) [ttopen() does this] - Modem raises CTS (V.24 circuit 106) [C-Kermit ignores this] - DTE issues a call request command ("CRN") - Modem responds with "VAL" ("command accepted") - If the call is completed: modem responds with "CNX" ("call connected"); modem turns CTS (106) OFF; modem turns DSR (107) ON; else: modem responds with "CFI " ("call failure indication"). . To clear a call, the DTE turns DTR (108) OFF. . There is no mention of the Carrier Detect circuit (109) in the standard. . There is no provision for "escaping back" to the modem's command mode. It is not known whether there exists in real life a pure V.25bis modem. If there is, this code has never been tested on it. See the Digitel entry. */ { "CCITT / ITU-T V.25bis autodialer", "", /* pulse command */ "", /* tone command */ 40, /* dial_time -- programmable -- */ ",:", /* pause_chars -- "," waits for programmable time */ /* ":" waits for dial tone */ 10, /* pause_time (seconds, just a guess) */ "", /* wake_str (none) */ 200, /* wake_rate (msec) */ "VAL", /* wake_prompt */ "", /* dmode_str (none) */ "", /* dmode_prompt (none) */ "CRN%s\\{13}", /* dial_str */ 200, /* dial_rate (msec) */ 0, /* No esc_time */ 0, /* No esc_char */ "", /* No hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "CIC\\{13}", /* aa_on_str */ "DIC\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* last minute init string */ 0L, /* max_speed */ CKD_V25, /* capas */ NULL /* No ok_fn */ }; static MDMINF HAYES = /* Hayes 2400 and compatible modems */ { "Hayes Smartmodem 2400 and compatibles", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATE1Q0V1&S0&C1&D2\\{13}", /* wake_str */ #else "ATQ0\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str, user supplies D or T */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 2400L, /* max_speed */ CKD_AT, /* capas */ getok /* ok_fn */ }; /* The intent of the "unknown" modem is to allow KERMIT to support unknown modems by having the user type the entire autodial sequence (possibly including control characters, etc.) as the "phone number". The protocol and other characteristics of this modem are unknown, with some "reasonable" values being chosen for some of them. The only way to detect if a connection is made is to look for carrier. */ static MDMINF UNKNOWN = /* Information for "Unknown" modem */ { "Unknown", /* name */ "", /* pulse command */ "", /* tone command */ 30, /* dial_time */ "", /* pause_chars */ 0, /* pause_time */ "", /* wake_str */ 0, /* wake_rate */ "", /* wake_prompt */ "", /* dmode_str */ NULL, /* dmode_prompt */ "%s\\{13}", /* dial_str */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* last minute init string */ 0L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; #ifndef MINIDIAL static MDMINF ATTISN = /* AT&T ISN Network */ { "", /* pulse command */ "", /* tone command */ "AT&T ISN Network", 30, /* Dial time */ "", /* Pause characters */ 0, /* Pause time */ "\\{13}\\{13}\\{13}\\{13}", /* Wake string */ 900, /* Wake rate */ "DIAL", /* Wake prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "%s\\{13}", /* dial_str */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* last minute init string */ 0L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; static MDMINF ATTMODEM = /* information for AT&T switched-network modems */ /* "Number" following "dial" can include: p's and * t's to indicate pulse or tone (default) dialing, * + for wait for dial tone, , for pause, r for * last number dialed, and, except for 2224B, some * comma-delimited options like o12=y, before number. * "Important" options for the modems: * * All: Except for 2224B, enable option 12 for "transparent * data," o12=y. If a computer port used for both * incoming and outgoing calls is connected to the * modem, disable "enter interactive mode on carriage * return," EICR. The Kermit "dial" command can * function with EIA leads standard, EIAS. * * 2212C: Internal hardware switches at their default * positions (four rockers down away from numbers) * unless EICR is not wanted (rocker down at the 4). * For EIAS, rocker down at the 1. * * 2224B: Front-panel switch position 1 must be up (at the 1, * closed). Disable EICR with position 2 down. * For EIAS, position 4 down. * All switches on the back panel down. * * 2224CEO: All front-panel switches down except either 5 or 6. * Enable interactive flow control with o16=y. * Select normal asynchronous mode with o34=0 (zero). * Disable EICR with position 3 up. For EIAS, 1 up. * Reset the modem after changing switches. * * 2296A: If option 00 (zeros) is present, use o00=0. * Enable interactive flow control with o16=y. * Select normal asynchronous mode with o34=0 (zero). * (available in Microcom Networking version, but * not necessarily other models of the 2296A). * Enable modem-port flow control (if available) with * o42=y. Enable asynchronous operation with o50=y. * Disable EICR with o69=n. For EIAS, o66=n, using * front panel. */ { "AT&T switched-network modems", "", /* pulse command */ "", /* tone command */ 20, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ "+", /* wake_str */ 0, /* wake_rate */ "", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "at%s\\{13}", /* dial_str */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 0L, /* max_speed */ CKD_AT, /* capas */ NULL /* ok_fn */ }; static MDMINF ATTDTDM = /* AT&T Digital Terminal Data Module */ /* For dialing: KYBD switch down, others usually up. */ { "AT&T Digital Terminal Data Module", "", /* pulse command */ "", /* tone command */ 20, /* dial_time */ "", /* pause_chars */ 0, /* pause_time */ "", /* wake_str */ 0, /* wake_rate */ "", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "%s\\{13}", /* dial_str */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* last minute init string */ 0L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; static MDMINF KEEPINTOUCH = /* AT&T KeepinTouch Card Modem */ { "AT&T KeepinTouch V.32bis Card Modem", /* Name */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4&S0&C1&D2\\\\K5\\{13}", /* wake_str */ #else "ATQ0E1X4\\\\K5\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT\\\\Q3\\{13}", /* hwfc_str */ "AT\\\\Q1\\\\X0\\{13}", /* swfc_str */ "AT\\\\Q0\\{13}", /* nofc_str */ "AT\\\\N3-J1\\{13}", /* ec_on_str */ "AT\\\\N1\\{13}", /* ec_off_str */ "AT%C3\"H3\\{13}", /* dc_on_str */ "AT%C0\"H0\\{13}", /* dc_off_str */ "ATS0=1\\\\{13}", /* aa_on_str */ "ATS0=0\\\\{13}", /* aa_off_str */ "ATN0\\\\J0\\{13}", /* sb_on_str */ "ATN1\\\\J1\\{13}", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF DIGITEL = /* Digitel DT-22 CCITT variant used in Brazil */ /* Attempts to adhere strictly to the V.25bis specification do not produce good results in real life. The modem for which this code was developed: (a) ignores parity; (b) sometimes terminates responses with LF CR instead of CR LF; (c) has a Hayes-like escape sequence; (d) supports a hangup ("HUP") command. Information from Fernando Cabral in Brasilia. */ { "Digitel DT-22 CCITT dialer", "", /* pulse command */ "", /* tone command */ 40, /* dial_time -- programmable -- */ ",:", /* pause_chars -- "," waits for programmable time */ /* ":" waits for dial tone */ 10, /* pause_time (seconds, just a guess) */ "HUP\\{13}", /* wake_str (Not Standard CCITT) */ 200, /* wake_rate (msec) */ "VAL", /* wake_prompt */ "", /* dmode_str (none) */ "", /* dmode_prompt (none) */ "CRN%s\\{13}", /* dial_str */ 200, /* dial_rate (msec) */ 1100, /* esc_time (Not Standard CCITT) */ 43, /* esc_char (Not Standard CCITT) */ "HUP\\{13}", /* hup_str (Not Standard CCITT) */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "CIC\\{13}", /* aa_on_str */ "DIC\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* last minute init string */ 0L, /* max_speed */ CKD_V25, /* capas */ getok /* ok_fn */ }; static MDMINF H_1200 = /* Hayes 1200 and compatible modems */ { "Hayes Smartmodem 1200 and compatibles", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATE1Q0V1\\{13}", /* wake_str */ #else "ATQ0\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "", /* ignoredt */ "", /* last minute init string */ 1200L, /* max_speed */ CKD_AT, /* capas */ getok /* ok_fn */ }; static MDMINF H_ULTRA = /* Hayes high-speed */ { "Hayes Ultra/Optima/Accura 96/144/288", /* U,O,A */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATE1Q0V1X4N1Y0&S0&C1&D2S37=0S82=128\\{13}", /* wake_str */ #else "ATQ0X4N1Y0S37=0S82=128\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ /* OK for U,O */ "AT&K4\\{13}", /* swfc_str */ /* OK for U,O */ "AT&K0\\{13}", /* nofc_str */ /* OK for U,O */ "AT&Q5S36=7S48=7\\{13}", /* ec_on_str */ /* OK for U,O */ "AT&Q0\\{13}", /* ec_off_str */ /* OK for U,O */ "ATS46=2\\{13}", /* dc_on_str */ "ATS46=0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 115200L, /* max_speed */ /* (varies) */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF H_ACCURA = /* Hayes Accura */ { /* GUESSING IT'S LIKE ULTRA & OPTIMA */ "Hayes Accura", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATE1Q0V1X4N1Y0&S0&C1&D2S37=0\\{13}", /* wake_str */ #else "ATQ0X4N1Y0S37=0\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT&Q5S36=7S48=7\\{13}", /* ec_on_str */ "AT&Q0\\{13}", /* ec_off_str */ "ATS46=2\\{13}", /* dc_on_str */ "ATS46=0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 115200L, /* max_speed */ /* (varies) */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF PPI = /* Practical Peripherals */ { "Practical Peripherals V.22bis or higher with V.42 and V.42bis", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef COMMENT /* In newer models S82 (BREAK handling) was eliminated, causing an error. */ #ifdef OS2 "ATQ0X4N1&S0&C1&D2S37=0S82=128\\{13}", /* wake_str */ #else "ATQ0X4N1S37=0S82=128\\{13}", /* wake_str */ #endif /* OS2 */ #else /* So now we use Y0 instead */ #ifdef OS2 "ATE1Q0V1X4N1&S0&C1&D2Y0S37=0\\{13}", /* wake_str */ #else "ATQ0X4N1Y0S37=0\\{13}", /* wake_str */ #endif /* OS2 */ #endif /* COMMENT */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT&Q5S36=7S48=7\\{13}", /* ec_on_str */ "AT&Q0S36=0S48=128\\{13}", /* ec_off_str */ "ATS46=2\\{13}", /* dc_on_str */ "ATS46=0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF DATAPORT = /* AT&T Dataport */ { "AT&T / Paradyne DataPort V.32 or higher", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ /* Note: S41=0 (use highest modulation) omitted, since it is not supported on the V.32 and lower models. So let's not touch it. */ #ifdef OS2 "ATQ0E1V1X6&S0&C1&D2&Q0S78=0\\{13}", /* wake_str */ #else "ATQ0E1X6&Q0S78=0\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT\\\\Q3\\{13}", /* hwfc_str */ "AT\\\\Q1\\X0\\{13}", /* swfc_str */ "AT\\\\Q0\\{13}", /* nofc_str */ "AT\\\\N7\\{13}", /* ec_on_str */ "AT\\\\N0\\{13}", /* ec_off_str */ "AT%C1\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF UCOM_AT = /* Microcom DeskPorte FAST ES 28.8 */ { "Microcom DeskPorte FAST 28.8", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATE1Q0V1X4\\\\N0F0&S0&C1&D2\\\\K5\\{13}", /* wake_str */ #else "ATQ0X4F0\\K5\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT\\\\Q3\\{13}", /* hwfc_str */ "AT\\\\Q1\\{13}", /* swfc_str */ "AT\\\\H0\\Q0\\{13}", /* nofc_str */ "AT\\\\N3\\{13}", /* ec_on_str */ "AT\\\\N0\\{13}", /* ec_off_str */ "AT%C3\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "AT-J0\\{13}", /* sb_on_str */ "AT-J1\\{13}", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF ZOOM = /* Zoom Telephonics V.32bis */ { "Zoom Telephonics V.32bis", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATE1Q0V1N1W1X4&S0&C1&D2S82=128S95=47\\{13}", /* wake_str */ #else "ATQ0E1N1W1X4S82=128S95=47\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT&Q5S36=7S48=7\\{13}", /* ec_on_str */ "AT&Q0\\{13}", /* ec_off_str */ "ATS46=138\\{13}", /* dc_on_str */ "ATS46=136\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF ZYXEL = /* ZyXEL U-Series */ { "ZyXEL U-Series V.32bis or higher", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATE1Q0V1&S0&C1&D2&N0X5&Y1\\{13}", /* wake_str */ #else "ATQ0E1&N0X5&Y1\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&H3\\{13}", /* hwfc_str */ "AT&H4\\{13}", /* swfc_str */ "AT&H0\\{13}", /* nofc_str */ "AT&K3\\{13}", /* ec_on_str */ "AT&K0\\{13}", /* ec_off_str */ "AT&K4\\{13}", /* dc_on_str */ "AT&K3\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF ZOLTRIX = /* Zoltrix */ { "Zoltrix V.32bis and V.34 modems with Rockwell ACI chipset", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATE1Q0V1F0W1X4Y0&S0&C1&D2\\\\K5S82=128S95=41\\{13}", /* wake_str */ #else "ATQ0E1F0W1X4Y0\\\\K5S82=128S95=41\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4S32=17S33=19\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT\\\\N3\\{13}", /* ec_on_str */ "AT\\\\N1\\{13}", /* ec_off_str */ "ATS46=138%C3\\{13}", /* dc_on_str */ "ATS46=136%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "AT\\\\N0\\{13}", /* sb_on_str */ "AT&Q0\\{13}", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF MOTOROLA = { /* Motorola FasTalk II or Lifestyle */ /* "\E" and "\X" commands removed - Motorola Lifestyle doesn't have them. \E0 = Don't echo while online \X0 = Process Xon/Xoff but don't pass through */ "Motorola FasTalk II or Lifestyle", /* Name */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATE1Q0V1X4&S0&C1&D2\\\\K5\\\\V1\\{13}", /* wake_str */ #else "ATQ0E1X4\\\\K5\\\\V1\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT\\\\Q3\\{13}", /* hwfc_str */ "AT\\\\Q1\\{13}", /* swfc_str */ "AT\\\\Q0\\{13}", /* nofc_str */ "AT\\\\N6\\{13}", /* ec_on_str */ "AT\\\\N1\\{13}", /* ec_off_str */ "AT%C1\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "AT\\\\J0\\{13}", /* sb_on_str */ "AT\\\\J1\\{13}", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF BOCA = /* Boca */ { "BOCA 14.4 Faxmodem", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATE1Q0V1F1N1W1&S0&C1&D2\\\\K5S37=11S82=128S95=47X4\\{13}", /* wake_str */ #else "ATQ0E1F1N1W1\\\\K5S37=11S82=128S95=47X4\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT\\\\N3S36=7S48=7\\{13}", /* ec_on_str */ "AT\\\\N1\\{13}", /* ec_off_str */ "ATS46=138\\{13}", /* dc_on_str */ "ATS46=136\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF INTEL = /* Intel */ { "Intel High-Speed Faxmodem", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATE1Q0V1Y0X4&S0&C1&D2\\\\K1\\\\V2S25=50\\{13}", /* wake_str */ #else "ATQ0E1Y0X4\\\\K1\\\\V2S25=50\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "ATB1+FCLASS=0\\{13}", /* dmode_str */ "OK\\{13}", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT\\\\G1\\\\Q3\\{13}", /* hwfc_str */ "AT\\\\G1\\\\Q1\\X0\\{13}", /* swfc_str */ "AT\\\\G0\\{13}", /* nofc_str */ "AT\\\\J0\\\\N3\"H3\\{13}", /* ec_on_str */ "AT\\\\N1\\{13}", /* ec_off_str */ "AT%C1\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF MULTITECH = /* Multitech */ { "Multitech MT1432 or MT2834 Series", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATE1Q0V1X4&S0&C1&D2&E8&Q0%E1\\{13}", /* wake_str */ #else "ATQ0E1X4&E8&Q0%E1#P0\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&E4&E7&E8&E11&E13\\{13}", /* hwfc_str */ "AT&E5&E6&E8&E11&E13\\{13}", /* swfc_str */ "AT&E3&E7&E8&E10&E12\\{13}", /* nofc_str */ "AT&E1\\{13}", /* ec_on_str */ "AT#L0&E0\\{13}", /* ec_off_str */ "AT&E15\\{13}", /* dc_on_str */ "AT&E14\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "AT$BA0\\{13}", /* sb_on_str (= "baud adjust off") */ "AT$BA1\\{13}", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF SUPRA = /* Supra */ { "SupraFAXModem 144 or 288", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1N1W0X4Y0&S0&C1&D2\\\\K5S82=128\\{13}", /* wake_str */ #else "ATQ0E1N1W0X4Y0\\\\K5S82=128\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT&Q5\\\\N3S48=7\\{13}", /* ec_on_str */ "AT&Q0\\\\N1\\{13}", /* ec_off_str */ "AT%C1S46=138\\{13}", /* dc_on_str */ "AT%C0S46=136\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM\\{13}", /* sp_off_str */ "ATL\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF SUPRAX = /* Supra Express */ { "Diamond Supra Express V.90", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1W0X4&C1&D2&S0\\K5015", /* wake_str */ #else #ifdef VMS "ATQ0E1W0X4&S1\\K5015", /* wake_str */ #else "ATQ0E1W0X4\\K5015", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT\\\\N3\\{13}", /* ec_on_str */ "AT\\\\N1\\{13}", /* ec_off_str */ "AT%C2\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM\\{13}", /* sp_off_str */ "ATL\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 230400L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF MAXTECH = /* MaxTech */ { "MaxTech XM288EA or GVC FAXModem", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4Y0&S0&C1&D2&L0&M0\\\\K5\\{13}", /* wake_str */ #else "ATQ0E1X4Y0&L0&M0\\\\K5\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT\\\\Q3\\{13}", /* hwfc_str */ "AT\\\\Q1\\\\X0\\{13}", /* swfc_str */ "AT\\\\Q0\\{13}", /* nofc_str */ "AT\\\\N6\\{13}", /* ec_on_str */ "AT\\\\N0\\{13}", /* ec_off_str */ "AT\\\\N6%C1\\{13}", /* dc_on_str */ "AT\\\\N6%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF ROLM = /* IBM / Siemens / Rolm 8000, 9000, 9751 CBX DCM */ { "IBM/Siemens/Rolm CBX Data Communications Module", "", /* pulse command */ "", /* tone command */ 60, /* dial_time */ "", /* pause_chars */ 0, /* pause_time */ "\\{13}\\{13}", /* wake_str */ 50, /* wake_rate */ "MODIFY?", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "CALL %s\\{13}", /* dial_str */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* last minute init string */ 19200L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; static MDMINF USR = /* USR Courier and Sportster modems */ { "US Robotics Courier or Sportster", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4&A3&S0&C1&D2&N0&Y3\\{13}", /* wake_str */ #else "ATQ0X4&A3&N0&Y3\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&H1&R2&I0\\{13}", /* hwfc_str */ "AT&H2&R1&I2\\{13}", /* swfc_str */ "AT&H0&R1&I0\\{13}", /* nofc_str */ "AT&M4&B1\\{13}", /* ec_on_str */ "AT&M0\\{13}", /* ec_off_str */ "AT&K1\\{13}", /* dc_on_str */ "AT&K0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; #ifdef OLDTBCODE static MDMINF TELEBIT = /* All Telebits */ { "Telebit - all models", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 60, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ /* NOTE: The wake_string MUST contain the I command (model query), and otherwise must contain commands that work on ALL Telebit models. Here we ensure that result codes are returned (Q0), and ask for extended result codes (X1), and ensure that the escape sequence is +++ and it is enabled. And also, make sure the final character is not a digit (whose echo might be mistaken for a result code). The Ctrl-Q (\021) and multiple A's are recommended by Telebit. */ #ifdef OS2 "\\{17}AAAAATQ0X1&S0&C1&D2S12=50 S50=0 I\\{13}", /* wake_str. */ #else "\\{17}AAAAATQ0X1S12=50 S50=0 I\\{13}", /* wake_str. */ #endif /* OS2 */ 100, /* wake_rate = 100 msec */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str, Note: no T or P */ 80, /* dial_rate */ 1100, /* esc_time (guard time) */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "ATS58=2S68=2\\{13}", /* hwfc_str */ "ATS58=3S68=3\\{13}", /* swfc_str */ "ATS58=0S68=0\\{13}", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 0L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW|CKD_TB, /* capas */ getok /* ok_fn */ }; #else static MDMINF OLDTB = /* Old Telebits */ { "Telebit TrailBlazer, T1000, T1500, T2000, T2500", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 60, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "\\{17}AAAAATQ0E1V1X1&S0&C1&D2S12=50S50=0S54=3\\{13}", /* wake_str. */ #else "\\{17}AAAAATQ0X1S12=50S50=0S54=3\\{13}", /* wake_str. */ #endif /* OS2 */ 100, /* wake_rate = 100 msec */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str, Note: no T or P */ 80, /* dial_rate */ 1100, /* esc_time (guard time) */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "ATS58=2S68=2\\{13}", /* hwfc_str */ "ATS58=3S68=3S69=0\\{13}", /* swfc_str */ "ATS58=0S68=0\\{13}", /* nofc_str */ "ATS66=1S95=2\\{13}", /* ec_on_str */ "ATS95=0\\{13}", /* ec_off_str */ "ATS110=1S96=1\\{13}", /* dc_on_str */ "ATS110=0S96=0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 19200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW|CKD_TB|CKD_KS, /* capas */ getok /* ok_fn */ }; static MDMINF NEWTB = /* New Telebits */ { "Telebit T1600, T3000, QBlazer, WorldBlazer, etc.", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 60, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "\\{17}AAAAATQ0E1V1X2&S0&C1&D2S12=50S50=0S61=1S63=0\\{13}", /* wake_str. */ #else "\\{17}AAAAATQ0X2S12=50S50=0S61=1S63=0\\{13}", /* wake_str. */ #endif /* OS2 */ 100, /* wake_rate = 100 msec */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str, Note: no T or P */ 80, /* dial_rate */ 1100, /* esc_time (guard time) */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "ATS58=2S68=2\\{13}", /* hwfc_str */ "ATS58=3S68=3\\{13}", /* swfc_str */ "ATS58=0S68=0\\{13}", /* nofc_str */ "ATS180=3\\{13}", /* ec_on_str */ "ATS180=0\\{13}", /* ec_off_str */ "ATS190=1\\{13}", /* dc_on_str */ "ATS190=0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 38400L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW|CKD_TB|CKD_KS, /* capas */ getok /* ok_fn */ }; #endif /* OLDTBCODE */ #endif /* MINIDIAL */ static MDMINF DUMMY = /* dummy information for modems that are handled elsewhere */ { "(dummy)", "", /* pulse command */ "", /* tone command */ 30, /* dial_time */ "", /* pause_chars */ 0, /* pause_time */ "", /* wake_str */ 0, /* wake_rate */ "", /* wake_prompt */ "", /* dmode_str */ NULL, /* dmode_prompt */ "%s\\{13}", /* dial_str */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* last minute init string */ 0L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; #ifndef MINIDIAL static MDMINF RWV32 = /* Generic Rockwell V.32 */ { "Generic Rockwell V.32 modem", /* ATI3, ATI4, and ATI6 for details */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4W1Y0&S0&C1&D2%E2\\\\K5+FCLASS=0N1S37=0\\{13}", /* wake_str */ #else "ATQ0X4W1Y0%E2\\\\K5+FCLASS=0N1S37=0\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4S32=17S33=19\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT&Q5\\\\N0\\{13}", /* ec_on_str */ "AT&Q0\\\\N1\\{13}", /* ec_off_str */ "AT%C1\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF RWV32B = /* Generic Rockwell V.32bis */ { "Generic Rockwell V.32bis modem", /* ATI3, ATI4, and ATI6 for details */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4W1Y0&S0&C1&D2%E2\\\\K5+FCLASS=0N1S37=0\\{13}", /* wake_str */ #else "ATQ0X4W1Y0%E2\\\\K5+FCLASS=0N1S37=0\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4S32=17S33=19\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT&Q5S36=7S48=7\\\\N3\\{13}", /* ec_on_str */ "AT&Q0S48=128\\\\N1\\{13}", /* ec_off_str */ "ATS46=138%C1\\{13}", /* dc_on_str */ "ATS46=136%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF RWV34 = /* Generic Rockwell V.34 Data/Fax */ { "Generic Rockwell V.34 modem", /* ATI3, ATI4, and ATI6 for details */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4W1Y0%E2&S0&C1&D2\\\\K5+FCLASS=0+MS=11,1\\{13}", /* wake_str */ #else "ATQ0X4W1Y0%E2\\\\K5+FCLASS=0+MS=11,1\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4S32=17S33=19\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT&Q5S36=7S48=7\\\\N3\\{13}", /* ec_on_str */ "AT&Q0S48=128\\\\N1\\{13}", /* ec_off_str */ "ATS46=138%C1\\{13}", /* dc_on_str */ "ATS46=136%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF RWV90 = /* Generic Rockwell V.90 Data/Fax */ { "Generic Rockwell V.90 56K modem", /* ATI3, ATI4, and ATI6 for details */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "AT&F0Q0E1V1&S0&C1&D1W1%E2\\\\K5+FCLASS=0N1S0=0S37=0\\\\V1\\{13}", #else #ifdef VMS "AT&F0Q0&S1W1%E2\\\\K5+FCLASS=0N1S0=0S37=0\\\\V1\\{13}", /* wake_str */ #else "AT&F0Q0W1%E2\\\\K5+FCLASS=0N1S0=0S37=0\\\\V1\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4S32=17S33=19\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT&Q5S36=7S48=7\\\\N3\\{13}", /* ec_on_str */ "AT&Q0S48=128\\\\N1\\{13}", /* ec_off_str */ "AT%C3\\{13}", /* dc_on_str */ "ATS46=136%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF MWAVE = /* IBM Mwave */ { "IBM Mwave Adapter", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4Y0&S0&C1&D2&M0&Q0&N1\\\\K3\\\\T0%E2S28=0\\{13}", /* wake_str */ #else "ATQ0X4Y0&M0&Q0&N1&S0\\\\K3\\\\T0%E2S28=0\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT\\\\Q3\\{13}", /* hwfc_str */ "", /* swfc_str (it doesn't!) */ "AT\\\\Q0\\{13}", /* nofc_str */ "AT\\\\N7\\{13}", /* ec_on_str */ "AT\\\\N0\\{13}", /* ec_off_str */ "AT%C1\"H3\\{13}", /* dc_on_str */ "AT%C0\"H0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW, /* capas */ getok /* ok_fn */ }; static MDMINF TELEPATH = /* Gateway 2000 Telepath */ { "Gateway 2000 Telepath II 28.8", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4&S0&C1&D2&N0&Y2#CLS=0S13=0S15=0S19=0\\{13}", /* wake_str */ #else "ATQ0X4&N0&Y1#CLS=0S13=0S15=0S19=0\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&H1&R2\\{13}", /* hwfc_str */ "AT&H2&I2S22=17S23=19\\{13}", /* swfc_str */ "AT&H0&I0&R1\\{13}", /* nofc_str */ "AT&M4&B1\\{13}", /* ec_on_str -- also fixes speed */ "AT&M0\\{13}", /* ec_off_str */ "AT&K1\\{13}", /* dc_on_str */ "AT&K0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF CARDINAL = /* Cardinal - based on Rockwell V.34 */ { "Cardinal MVP288X Series", /* ATI3, ATI4, and ATI6 for details */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4W1Y0%E2&S0&C1&D2\\\\K5+FCLASS=0+MS=11,1\\{13}", /* wake_str */ #else "ATQ0X4W1Y0%E2\\\\K5+FCLASS=0+MS=11,1\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4S32=17S33=19\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT&Q5S36=7S48=7\\\\N3\\{13}", /* ec_on_str */ "AT&Q0S48=128\\\\N1\\{13}", /* ec_off_str */ "ATS46=138%C1\\{13}", /* dc_on_str */ "ATS46=136%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; /* Now the "old" modems, all grouped together, and also within "if not defined MINIDIAL"... */ #ifdef OLDMODEMS static MDMINF CERMETEK = /* Information for "Cermetek Info-Mate 212 A" modem */ { "Cermetek Info-Mate 212 A", "", /* pulse command */ "", /* tone command */ 20, /* dial_time */ "BbPpTt", /* pause_chars */ 0, /* pause_time */ " XY\016R\\{13}", /* wake_str */ 200, /* wake_rate */ "", /* wake_prompt */ "", /* dmode_str */ NULL, /* dmode_prompt */ "\016D '%s'\\{13}", /* dial_str */ 200, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* last minute init string */ 1200L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; static MDMINF DF03 = /* information for "DEC DF03-AC" modem */ { "Digital DF03-AC", "", /* pulse command */ "", /* tone command */ 27, /* dial_time */ "=", /* pause_chars */ 15, /* pause_time */ "\001\002", /* wake_str */ 0, /* wake_rate */ "", /* wake_prompt */ "", /* dmode_str */ NULL, /* dmode_prompt */ "%s", /* dial_str */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* last minute init string */ 0L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; static MDMINF DF100 = /* information for "DEC DF100-series" modem */ /* * The telephone "number" can include "P"s and/or "T"s * within it to indicate that subsequent digits are * to be dialed using pulse or tone dialing. The * modem defaults to pulse dialing. You may modify * the dial string below to explicitly default all * dialing to pulse or tone, but doing so prevents * the use of phone numbers that you may have stored * in the modem's memory. */ { "Digital DF-100", "", /* pulse command */ "", /* tone command */ 30, /* dial_time */ "=", /* pause_chars */ 15, /* pause_time */ "\001", /* wake_str */ 0, /* wake_rate */ "", /* wake_prompt */ "", /* dmode_str */ NULL, /* dmode_prompt */ "%s#", /* dial_str */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* last minute init string */ 0L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; static MDMINF DF200 = /* information for "DEC DF200-series" modem */ /* * The telephone "number" can include "P"s and/or "T"s * within it to indicate that subsequent digits are * to be dialed using pulse or tone dialing. The * modem defaults to pulse dialing. You may modify * the dial string below to explicitly default all * dialing to pulse or tone, but doing so prevents * the use of phone numbers that you may have stored * in the modem's memory. */ { "Digital DF-200", "", /* pulse command */ "", /* tone command */ 30, /* dial_time */ "=W", /* pause_chars */ /* =: second tone; W: 5 secs */ 15, /* pause_time */ /* worst case */ "\002", /* wake_str */ /* allow stored number usage */ 0, /* wake_rate */ "", /* wake_prompt */ "", /* dmode_str */ NULL, /* dmode_prompt */ #ifdef COMMENT "%s!", /* dial_str */ #else " d %s\\{13}", #endif /* COMMENT */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* last minute init string */ 0L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; static MDMINF GDC = /* information for "GeneralDataComm 212A/ED" modem */ { "GeneralDataComm 212A/ED", "", /* pulse command */ "", /* tone command */ 32, /* dial_time */ "%", /* pause_chars */ 3, /* pause_time */ "\\{13}\\{13}", /* wake_str */ 500, /* wake_rate */ "$", /* wake_prompt */ "D\\{13}", /* dmode_str */ ":", /* dmode_prompt */ "T%s\\{13}", /* dial_str */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* last minute init string */ 1200L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; static MDMINF PENRIL = /* information for "Penril" modem */ { "Penril modem", "", /* pulse command */ "", /* tone command */ 50, /* dial_time */ "", /* pause_chars */ 0, /* pause_time */ "\\{13}\\{13}", /* wake_str */ 300, /* wake_rate */ ">", /* wake_prompt */ "k\\{13}", /* dmode_str */ ":", /* dmode_prompt */ "%s\\{13}", /* dial_str */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* last minute init string */ 0L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; static MDMINF RACAL = /* Racal Vadic VA4492E */ { "Racal Vadic VA4492E", "", /* pulse command */ "", /* tone command */ 35, /* dial_time (manual says modem is hardwired to 60) */ "Kk", /* pause_chars */ 5, /* pause_time */ "\005\\{13}", /* wake_str, ^E^M */ 50, /* wake_rate */ "*", /* wake_prompt */ "D\\{13}", /* dmode_str */ "?", /* dmode_prompt */ "%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 5, /* esc_char, ^E */ "\003\004", /* hup_str, ^C^D */ 0, /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* last minute init string */ 0L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; static MDMINF VENTEL = /* Information for Ven-Tel modem */ { "Ven-Tel", "", /* pulse command */ "", /* tone command */ 20, /* dial_time */ "%", /* pause_chars */ 5, /* pause_time */ "\\{13}\\{13}\\{13}", /* wake_str */ 300, /* wake_rate */ "$", /* wake_prompt */ "K\\{13}", /* dmode_str (was "") */ "Number to call: ", /* dmode_prompt (was NULL) */ "%s\\{13}", /* dial_str (was "") */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* last minute init string */ 0L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; static MDMINF CONCORD = /* Info for Condor CDS 220 2400b modem */ { "Concord Condor CDS 220 2400b", "", /* pulse command */ "", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ "\\{13}\\{13}", /* wake_str */ 20, /* wake_rate */ "CDS >", /* wake_prompt */ "", /* dmode_str */ NULL, /* dmode_prompt */ "", /* dial_str */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* last minute init string */ 2400L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; #endif /* OLDMODEMS */ static MDMINF MICROCOM = /* Microcom modems in native SX mode */ /* (long answer only) */ { "Microcom MNP modems in SX command mode", "DP\\{13}", /* pulse command */ "DT\\{13}", /* tone command */ 35, /* dial_time */ ",!@", /* pause_chars (! and @ aren't pure pauses) */ 3, /* pause_time */ /* The following sets 8 bits, no parity, BREAK passthru, and SE0 disables the escape character, which is a single character with no guard time, totally unsafe, so we have no choice but to disable it. Especially since, by default, it is Ctrl-A, which is Kermit's packet-start character. We would change it to something else, which would enable "mdmhup()", but the user wouldn't know about it. Very bad. Note: SE1 sets it to Ctrl-A, SE2 sets it to Ctrl-B, etc (1..31 allowed). Also SE/Q sets it to "Q". */ "SE0;S1P4;SBRK5\\{13}", /* wake_str */ 100, /* wake_rate */ "!", /* wake_prompt */ "", /* dmode_str */ NULL, /* dmode_prompt */ "D%s\\{13}", /* dial_str - number up to 39 chars */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char - we can't use this */ "", /* hup_str - it's "H" but can't use */ "SF13\\{13}", /* hwfc_str */ "SF11\\{13}", /* swfc_str */ "SF10\\{13}", /* nofc_str */ "BAOFF;SMAUT\\{13}", /* ec_on_str */ "BAON;SMDIR\\{13}", /* ec_off_str */ "COMP1\\{13}", /* dc_on_str */ "COMP0\\{13}", /* dc_off_str */ "AA", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "SA2", /* sp_off_str */ "SA0", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* last minute init string */ 0L, /* max_speed */ CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW|CKD_KS, /* capas */ getok /* ok_fn */ }; static MDMINF MICROLINK = /* MicroLink ... */ { /* 14.4TQ,TL,PC;28.8TQ,TQV;2440T/TR */ "ELSA MicroLink 14.4 28.8, 33.6, or 56K", /* ELSA GmbH, Aachen */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4&S0\\\\D0&C1&D2\\\\K5\\{13}", /* wake_str */ #else "ATQ0X4\\\\K5\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H\\{13}", /* hup_str */ "AT\\\\Q3\\{13}", /* hwfc_str */ "AT\\\\Q1\\\\X0\\{13}", /* swfc_str */ "AT\\\\Q0\\{13}", /* nofc_str */ "AT\\\\N3\\{13}", /* ec_on_str */ "AT\\\\N0\\{13}", /* ec_off_str */ "AT%C3\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "\\J0", /* sb_on_str (?) */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF ULINKV250 = /* MicroLink V.250 */ { /* 56Kflex, V.90; V.250 command set */ "ELSA MicroLink 56K V.250", /* ELSA GmbH, Aachen */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 /* \\D0 = DSR & CTS always on but hwfc overrides on CTS. */ "ATQ0E1V1X4&S0\\\\D0&C1&D2\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0X4&S1\\{13}", /* wake_str */ #else "ATQ0X4\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT+IFC=2,2\\{13}", /* hwfc_str */ "AT+IFC=1,1\\{13}", /* swfc_str */ "AT+IFC=0,0\\{13}", /* nofc_str */ "AT+ES=3,0\\{13}", /* ec_on_str */ "AT+ES=1,0\\{13}", /* ec_off_str */ "AT+DS=3,0,2048,32\\{13}", /* dc_on_str */ "AT+DS=0,0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str (?) */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; #endif /* MINIDIAL */ static MDMINF ITUTV250 = /* ITU-T V.250 conforming modem */ { "Any ITU-T V.25ter/V.250 conformant modem", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4&S0&C1&D2\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0X4&S1\\{13}", /* wake_str */ #else "ATQ0X4\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT+IFC=2,2\\{13}", /* hwfc_str */ "AT+IFC=1,1\\{13}", /* swfc_str */ "AT+IFC=0,0\\{13}", /* nofc_str */ "AT+ES=3,0,2;+EB=1,0,30\\{13}", /* ec_on_str */ "AT+ES=0\\{13}", /* ec_off_str */ "AT+DS=3,0\\{13}", /* dc_on_str */ "AT+DS=0,0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; #ifndef CK_TAPI static #endif /* CK_TAPI */ MDMINF GENERIC = /* Generic high speed ... */ { "Generic high-speed AT command set", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ "AT&F\\{13}", /* wake_str */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H\\{13}", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW, /* capas */ getok /* ok_fn */ }; #ifndef MINIDIAL static MDMINF XJACK = /* Megahertz X-Jack */ { "Megahertz X-Jack XJ3144 / CC6144", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4N1&C1&D2\\\\K5\\{13}", /* wake_str */ #else "ATQ0X4N1\\\\K5\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT\\\\N3&Q5\\{13}", /* ec_on_str */ "AT\\\\N1&Q0\\{13}", /* ec_off_str */ "AT%C3\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF SPIRITII = /* QuickComm Spirit II */ { "QuickComm Spirit II", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ "AT&F\\{13}", /* wake_str */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H\\{13}", /* hup_str */ "AT*F3\\{13}", /* hwfc_str */ "AT*F2\\{13}", /* swfc_str */ "AT*F0\\{13}", /* nofc_str */ "AT*E6\\{13}", /* ec_on_str */ "AT*E0\\{13}", /* ec_off_str */ "AT*E9\\{13}", /* dc_on_str */ "AT*E0\\{13}", /* dc_off_str */ "ATS0=2\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF MONTANA = { /* Motorola Montana */ "Motorola Montana", /* Name */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4&S0&C1&D2\\\\K5\\\\V1\\{13}", /* wake_str */ #else "ATQ0E1X4\\\\K5\\\\V1\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT\\\\Q3\\{13}", /* hwfc_str */ "AT\\\\Q1\\{13}", /* swfc_str */ "AT\\\\Q0\\{13}", /* nofc_str */ "AT\\\\N4\\{13}", /* ec_on_str */ "AT\\\\N1\\{13}", /* ec_off_str */ "AT%C1\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "AT\\\\J0\\{13}", /* sb_on_str */ "AT\\\\J1\\{13}", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF COMPAQ = { /* Compaq Data+Fax Modem */ "Compaq Data+Fax Modem", /* Name */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4&S0&C1&D2\\{13}", /* wake_str */ #else "ATQ0E1X4\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT\\\\Q3\\{13}", /* hwfc_str */ "AT\\\\Q1\\{13}", /* swfc_str */ "AT\\\\Q0\\{13}", /* nofc_str */ "AT\\\\N3\\{13}", /* ec_on_str */ "AT\\\\N0\\{13}", /* ec_off_str */ "AT%C1\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "AT\\\\N3\\{13}", /* sb_on_str */ "AT\\\\N1\\{13}", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF FUJITSU = { /* Fujitsu */ "Fujitsu Fax/Modem Adapter", /* Name */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4&S0&C1&D2\\\\K5\\\\N3\\{13}", /* wake_str */ #else "ATQ0E1X4\\\\K5\\\\N3\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\\\Q3\\{13}", /* hwfc_str */ "AT&K4\\\\Q1\\{13}", /* swfc_str */ "AT&K0\\\\Q0\\{13}", /* nofc_str */ "AT\\\\N3\\{13}", /* ec_on_str */ "AT\\\\N0\\{13}", /* ec_off_str */ "AT%C1", /* dc_on_str */ "AT%C0", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "AT\\\\J0\\{13}", /* sb_on_str */ "AT\\\\J1\\{13}", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF MHZATT = /* Megahertz AT&T V.34 */ { "Megahertz AT&T V.34", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4N1&C1&D2\\\\K5\\{13}", /* wake_str */ #else "ATQ0X4N1\\\\K5\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT\\\\N3\\{13}", /* ec_on_str */ "AT\\\\N0\\{13}", /* ec_off_str */ "AT%C1\"H3\\{13}", /* dc_on_str */ "AT%C0\"H0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "AT\\\\J0\\{13}", /* sb_on_str */ "AT\\\\J1\\{13}", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF SUPRASON = /* SupraSonic */ { "Diamond SupraSonic 288V+", /* Diamond Multimedia Systems Inc */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1N1W0X4Y0&S0&C1&D2\\{13}", /* wake_str */ #else "ATQ0E1N1W0X4Y0\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4\\{13}", /* swfc_str */ "AT&K\\{13}", /* nofc_str */ "AT&Q5\\\\N3S48=7\\{13}", /* ec_on_str */ "AT&Q0\\\\N1\\{13}", /* ec_off_str */ "AT%C3S46=138\\{13}", /* dc_on_str */ "AT%C0S46=136\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM\\{13}", /* sp_off_str */ "ATL\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF BESTDATA = /* Best Data */ { "Best Data Fax Modem", /* Best Data Fax Modem */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1N1W0X4Y0&S0&C1&D2\\{13}", /* wake_str */ #else "ATQ0E1N1W0X4Y0\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4\\{13}", /* swfc_str */ "AT&K\\{13}", /* nofc_str */ "AT&Q6\\\\N3\\{13}", /* ec_on_str */ "AT&Q0\\\\N1\\{13}", /* ec_off_str */ "AT%C3\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "AT\\\\N3\\{13}", /* sb_on_str */ "AT\\\\N0\\{13}", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF ATT1900 = /* AT&T Secure Data STU III 1900 */ { "AT&T Secure Data STU III Model 1900", /* name */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4\\{13}", /* wake_str */ #else "ATQ0E1X4+Q0\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 9600L, /* max_speed */ CKD_AT|CKD_SB|CKD_HW, /* capas */ getok /* ok_fn */ }; static MDMINF ATT1910 = /* AT&T Secure Data STU III 1910 */ { /* Adds V.32bis, V.42, V.42bis */ "AT&T Secure Data STU III Model 1910", /* name */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4&C1&S0&D2+Q0S36=1\\{13}", /* wake_str */ #else "ATQ0E1X4+Q0S36=1\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "ATS46=138S47=0\\{13}", /* ec_on_str */ "ATS46=138S47=128\\{13}", /* ec_off_str */ "ATS46=138S47=0\\{13}", /* dc_on_str */ "ATS46=138S47=128\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* last minute init string */ 9600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW, /* capas */ getok /* ok_fn */ }; static MDMINF USRX2 = /* USR XJ-CC1560 X2 56K */ { "US Robotics / Megahertz CC/XJ-CC1560 X2", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4&A3&S0&B2&C1&D2&N0\\{13}", /* wake_str */ #else "ATQ0X4&A3&B2&N0\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&H1&I0\\{13}", /* hwfc_str */ "AT&H2&I2\\{13}", /* swfc_str */ "AT&H0&I0\\{13}", /* nofc_str */ "AT&M4\\{13}", /* ec_on_str */ "AT&M0\\{13}", /* ec_off_str */ "AT&K1\\{13}", /* dc_on_str */ "AT&K0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "AT&B1\\{13}", /* sb_on_str */ "AT&B0\\{13}", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF ROLM_AT = /* Rolm data phone with AT command set */ { "Rolm 244PC or 600 Series with AT Command Set", "", /* pulse command */ "", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATE1Q0V1\\{13}", /* wake_str */ #else "ATQ0\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATDT%s\\{13}", /* dial_str -- always Tone */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_on_str */ "", /* sp_off_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* ini2 */ 19200L, /* max_speed */ CKD_AT, /* capas */ getok /* ok_fn */ }; static MDMINF ATLAS = /* Atlas / Newcom ixfC 33.6 */ { "Atlas / Newcom 33600ixfC Data/Fax Modem", /* Name */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATZ0&FQ0V1&C1&D2\\{13}", /* wake_str */ #else "ATZ0&FQ0V1\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT\"H3\\{13}", /* ec_on_str */ "AT\"H0\\{13}", /* ec_off_str */ "AT%C1\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "ATN0\\\\J0\\{13}", /* sb_on_str */ "ATN1\\\\J1\\{13}", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF CODEX = { /* Motorola Codex */ "Motorola Codex 326X Series", /* Name - AT&V to see settings */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 /* &M0=Async (not sync) */ /* *MM0=Automatic modulation negotiation */ /* *DE22=Automatic data rate */ "ATZQ0E1V1X4Y0*DE22*MM0&C1&M0&S0&D2\\{13}", /* wake_str */ #else #ifdef VMS "ATZQ0E1V1X4Y0*DE22*MM0&C1&M0&S1\\{13}", /* wake_str */ #else "ATZQ0E1V1X4Y0*DE22*MM0&C1&M0\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT*MF1*FL3\\{13}", /* hwfc_str */ "AT*MF1*FL1\\{13}", /* swfc_str */ "AT*MF0*FL0\\{13}", /* nofc_str */ "AT*EC0*SM3*SC0\\{13}", /* ec_on_str */ "AT*SM0\\{13}", /* ec_off_str */ "AT*DC1\\{13}", /* dc_on_str */ "AT*DC0\\{13}", /* dc_off_str */ "AT*AA5S0=1\\{13}", /* aa_on_str */ "AT*AA5S0=0\\{13}", /* aa_off_str */ "AT*SC1\\{13}", /* sb_on_str */ "AT*SC0\\{13}", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3*BD2\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF MT5634ZPX = /* Multitech */ { "Multitech MT5634ZPX", /* name */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATE1Q0V1X4&S0&C1&D2&Q0\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0E1X4&S1&Q0\\{13}", /* wake_str */ #else "ATQ0E1X4&Q0\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT\\\\N3\\{13}", /* ec_on_str */ "AT\\\\N1\\{13}", /* ec_off_str */ "AT%C1\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "AT\\\\J0\\{13}", /* sb_on_str */ "AT\\\\J1\\{13}", /* sb_off_str (NOT SUPPORTED) */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; #endif /* MINIDIAL */ #else /* K95_1120_MODEMS */ /* BEGIN MDMINF STRUCT DEFINITIONS */ /* Declare structures containing modem-specific information. REMEMBER that only the first SEVEN characters of these names are guaranteed to be unique. First declare the three types that are allowed for MINIDIAL versions. */ static MDMINF CCITT = /* CCITT / ITU-T V.25bis autodialer */ /* According to V.25bis: . Even parity is required for giving commands to the modem. . Commands might or might not echo. . Responses ("Indications") from the modem are terminated by CR and LF. . Call setup is accomplished by: - DTE raises DTR (V.24 circuit 108) [ttopen() does this] - Modem raises CTS (V.24 circuit 106) [C-Kermit ignores this] - DTE issues a call request command ("CRN") - Modem responds with "VAL" ("command accepted") - If the call is completed: modem responds with "CNX" ("call connected"); modem turns CTS (106) OFF; modem turns DSR (107) ON; else: modem responds with "CFI " ("call failure indication"). . To clear a call, the DTE turns DTR (108) OFF. . There is no mention of the Carrier Detect circuit (109) in the standard. . There is no provision for "escaping back" to the modem's command mode. It is not known whether there exists in real life a pure V.25bis modem. If there is, this code has never been tested on it. See the Digitel entry. */ { "Any CCITT / ITU-T V.25bis conformant modem", "", /* pulse command */ "", /* tone command */ 40, /* dial_time -- programmable -- */ ",:", /* pause_chars -- "," waits for programmable time */ /* ":" waits for dial tone */ 10, /* pause_time (seconds, just a guess) */ "", /* wake_str (none) */ 200, /* wake_rate (msec) */ "VAL", /* wake_prompt */ "", /* dmode_str (none) */ "", /* dmode_prompt (none) */ "CRN%s\\{13}", /* dial_str */ 200, /* dial_rate (msec) */ 0, /* No esc_time */ 0, /* No esc_char */ "", /* No hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "CIC\\{13}", /* aa_on_str */ "DIC\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* ini2 */ 0L, /* max_speed */ CKD_V25, /* capas */ NULL /* No ok_fn */ }; static MDMINF HAYES = /* Hayes 2400 and compatible modems */ { "Hayes Smartmodem 2400 and compatibles", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATE1Q0V1&S0&C1&D2\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0&S1\\{13}", /* wake_str */ #else "ATQ0\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str, user supplies D or T */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 2400L, /* max_speed */ CKD_AT, /* capas */ getok /* ok_fn */ }; /* The intent of the "unknown" modem is to allow KERMIT to support unknown modems by having the user type the entire autodial sequence (possibly including control characters, etc.) as the "phone number". The protocol and other characteristics of this modem are unknown, with some "reasonable" values being chosen for some of them. The only way to detect if a connection is made is to look for carrier. */ static MDMINF UNKNOWN = /* Information for "Unknown" modem */ { "Unknown", /* name */ "", /* pulse command */ "", /* tone command */ 30, /* dial_time */ "", /* pause_chars */ 0, /* pause_time */ "", /* wake_str */ 0, /* wake_rate */ "", /* wake_prompt */ "", /* dmode_str */ NULL, /* dmode_prompt */ "%s\\{13}", /* dial_str */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* ini2 */ 0L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; #ifndef MINIDIAL static MDMINF ATTISN = /* AT&T ISN Network */ { "", /* pulse command */ "", /* tone command */ "AT&T ISN Network", 30, /* Dial time */ "", /* Pause characters */ 0, /* Pause time */ "\\{13}\\{13}\\{13}\\{13}", /* Wake string */ 900, /* Wake rate */ "DIAL", /* Wake prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "%s\\{13}", /* dial_str */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* ini2 */ 0L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; static MDMINF ATTMODEM = /* information for AT&T switched-network modems */ /* "Number" following "dial" can include: p's and * t's to indicate pulse or tone (default) dialing, * + for wait for dial tone, , for pause, r for * last number dialed, and, except for 2224B, some * comma-delimited options like o12=y, before number. * "Important" options for the modems: * * All: Except for 2224B, enable option 12 for "transparent * data," o12=y. If a computer port used for both * incoming and outgoing calls is connected to the * modem, disable "enter interactive mode on carriage * return," EICR. The Kermit "dial" command can * function with EIA leads standard, EIAS. * * 2212C: Internal hardware switches at their default * positions (four rockers down away from numbers) * unless EICR is not wanted (rocker down at the 4). * For EIAS, rocker down at the 1. * * 2224B: Front-panel switch position 1 must be up (at the 1, * closed). Disable EICR with position 2 down. * For EIAS, position 4 down. * All switches on the back panel down. * * 2224CEO: All front-panel switches down except either 5 or 6. * Enable interactive flow control with o16=y. * Select normal asynchronous mode with o34=0 (zero). * Disable EICR with position 3 up. For EIAS, 1 up. * Reset the modem after changing switches. * * 2296A: If option 00 (zeros) is present, use o00=0. * Enable interactive flow control with o16=y. * Select normal asynchronous mode with o34=0 (zero). * (available in Microcom Networking version, but * not necessarily other models of the 2296A). * Enable modem-port flow control (if available) with * o42=y. Enable asynchronous operation with o50=y. * Disable EICR with o69=n. For EIAS, o66=n, using * front panel. */ { "AT&T switched-network modems", "", /* pulse command */ "", /* tone command */ 20, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ "+", /* wake_str */ 0, /* wake_rate */ "", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "at%s\\{13}", /* dial_str */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* ini2 */ 0L, /* max_speed */ CKD_AT, /* capas */ NULL /* ok_fn */ }; static MDMINF ATTDTDM = /* AT&T Digital Terminal Data Module */ /* For dialing: KYBD switch down, others usually up. */ { "AT&T Digital Terminal Data Module", "", /* pulse command */ "", /* tone command */ 20, /* dial_time */ "", /* pause_chars */ 0, /* pause_time */ "", /* wake_str */ 0, /* wake_rate */ "", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "%s\\{13}", /* dial_str */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* ini2 */ 0L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; static MDMINF DIGITEL = /* Digitel DT-22 CCITT variant used in Brazil */ /* Attempts to adhere strictly to the V.25bis specification do not produce good results in real life. The modem for which this code was developed: (a) ignores parity; (b) sometimes terminates responses with LF CR instead of CR LF; (c) has a Hayes-like escape sequence; (d) supports a hangup ("HUP") command. Information from Fernando Cabral in Brasilia. */ { "Digitel DT-22 CCITT dialer", "", /* pulse command */ "", /* tone command */ 40, /* dial_time -- programmable -- */ ",:", /* pause_chars -- "," waits for programmable time */ /* ":" waits for dial tone */ 10, /* pause_time (seconds, just a guess) */ "HUP\\{13}", /* wake_str (Not Standard CCITT) */ 200, /* wake_rate (msec) */ "VAL", /* wake_prompt */ "", /* dmode_str (none) */ "", /* dmode_prompt (none) */ "CRN%s\\{13}", /* dial_str */ 200, /* dial_rate (msec) */ 1100, /* esc_time (Not Standard CCITT) */ 43, /* esc_char (Not Standard CCITT) */ "HUP\\{13}", /* hup_str (Not Standard CCITT) */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "CIC\\{13}", /* aa_on_str */ "DIC\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* ini2 */ 0L, /* max_speed */ CKD_V25, /* capas */ getok /* ok_fn */ }; static MDMINF H_1200 = /* Hayes 1200 and compatible modems */ { "Hayes Smartmodem 1200 and compatibles", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATE1Q0V1\\{13}", /* wake_str */ #else "ATQ0\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "", /* ignoredt */ "", /* ini2 */ 1200L, /* max_speed */ CKD_AT, /* capas */ getok /* ok_fn */ }; static MDMINF H_ULTRA = /* Hayes high-speed */ { "Hayes Ultra/Optima/Accura 96/144/288", /* U,O,A */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATE1Q0V1X4N1Y0&S0&C1&D2S37=0S82=128\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0X4N1Y0&S1S37=0S82=128\\{13}", /* wake_str */ #else "ATQ0X4N1Y0S37=0S82=128\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ /* OK for U,O */ "AT&K4\\{13}", /* swfc_str */ /* OK for U,O */ "AT&K0\\{13}", /* nofc_str */ /* OK for U,O */ "AT&Q5S36=7S48=7\\{13}", /* ec_on_str */ /* OK for U,O */ "AT&Q0\\{13}", /* ec_off_str */ /* OK for U,O */ "ATS46=2\\{13}", /* dc_on_str */ "ATS46=0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ /* (varies) */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF H_ACCURA = /* Hayes Accura */ { /* GUESSING IT'S LIKE ULTRA & OPTIMA */ "Hayes Accura", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATE1Q0V1X4N1Y0&S0&C1&D2S37=0\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0X4N1Y0&S1S37=0\\{13}", /* wake_str */ #else "ATQ0X4N1Y0S37=0\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT&Q5S36=7S48=7\\{13}", /* ec_on_str */ "AT&Q0\\{13}", /* ec_off_str */ "ATS46=2\\{13}", /* dc_on_str */ "ATS46=0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ /* (varies) */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF PPI = /* Practical Peripherals */ { "Practical Peripherals V.22bis or higher with V.42 and V.42bis", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef COMMENT /* In newer models S82 (BREAK handling) was eliminated, causing an error. */ #ifdef OS2 "ATQ0X4N1&S0&C1&D2S37=0S82=128\\{13}", /* wake_str */ #else "ATQ0X4N1S37=0S82=128\\{13}", /* wake_str */ #endif /* OS2 */ #else /* So now we use Y0 instead */ #ifdef OS2 "ATE1Q0V1X4N1&S0&C1&D2Y0S37=0\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0X4N1Y0&S1S37=0\\{13}", /* wake_str */ #else "ATQ0X4N1Y0S37=0\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ #endif /* COMMENT */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT&Q5S36=7S48=7\\{13}", /* ec_on_str */ "AT&Q0S36=0S48=128\\{13}", /* ec_off_str */ "ATS46=2\\{13}", /* dc_on_str */ "ATS46=0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF DATAPORT = /* AT&T Dataport */ { "AT&T / Paradyne DataPort V.32 or higher", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ /* Note: S41=0 (use highest modulation) omitted, since it is not supported on the V.32 and lower models. So let's not touch it. */ #ifdef OS2 "ATQ0E1V1X6&S0&C1&D2&Q0Y0\\\\K5S78=0\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0E1X6&S1&Q0Y0\\\\K5S78=0\\{13}", /* wake_str */ #else "ATQ0E1X6&Q0Y0\\\\K5S78=0\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT\\\\Q3\\{13}", /* hwfc_str */ "AT\\\\Q1\\\\X0\\{13}", /* swfc_str */ "AT\\\\Q0\\{13}", /* nofc_str */ "AT\\\\N7\\{13}", /* ec_on_str */ "AT\\\\N0\\{13}", /* ec_off_str */ "AT%C1\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF UCOM_AT = /* Microcom DeskPorte FAST ES 28.8 */ { "Microcom DeskPorte FAST 28.8", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATE1Q0V1X4\\\\N0F0&S0&C1&D2\\\\K5\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0X4F0&S1\\\\K5\\{13}", /* wake_str */ #else "ATQ0X4F0\\\\K5\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT\\\\Q3\\{13}", /* hwfc_str */ "AT\\\\Q1\\{13}", /* swfc_str */ "AT\\\\H0\\\\Q0\\{13}", /* nofc_str */ "AT\\\\N3\\{13}", /* ec_on_str */ "AT\\\\N0\\{13}", /* ec_off_str */ "AT%C3\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "AT-J0\\{13}", /* sb_on_str */ "AT-J1\\{13}", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF ZOOM = /* Zoom Telephonics V.32bis */ { "Zoom Telephonics V.32bis", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATE1Q0V1N1W1X4&S0&C1&D2S82=128S95=47\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0E1N1W1X4&S1S82=128S95=47\\{13}", /* wake_str */ #else "ATQ0E1N1W1X4S82=128S95=47\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT&Q5S36=7S48=7\\{13}", /* ec_on_str */ "AT&Q0\\{13}", /* ec_off_str */ "ATS46=138\\{13}", /* dc_on_str */ "ATS46=136\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF ZYXEL = /* ZyXEL U-Series */ { "ZyXEL U-Series V.32bis or higher", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATE1Q0V1&S0&C1&D2&N0X5&Y1\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0E1&S1&N0X5&Y1\\{13}", /* wake_str */ #else "ATQ0E1&N0X5&Y1\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&H3\\{13}", /* hwfc_str */ "AT&H4\\{13}", /* swfc_str */ "AT&H0\\{13}", /* nofc_str */ "AT&K3\\{13}", /* ec_on_str */ "AT&K0\\{13}", /* ec_off_str */ "AT&K4\\{13}", /* dc_on_str */ "AT&K3\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF ZOLTRIX = /* Zoltrix */ { "Zoltrix V.32bis and V.34 modems with Rockwell ACI chipset", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATE1Q0V1F0W1X4Y0&S0&C1&D2\\\\K5S82=128S95=41\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0E1F0W1X4Y0&S1\\\\K5S82=128S95=41\\{13}", /* wake_str */ #else "ATQ0E1F0W1X4Y0\\\\K5S82=128S95=41\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4S32=17S33=19\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT\\\\N3\\{13}", /* ec_on_str */ "AT\\\\N1\\{13}", /* ec_off_str */ "ATS46=138%C3\\{13}", /* dc_on_str */ "ATS46=136%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "AT\\\\N0\\{13}", /* sb_on_str */ "AT&Q0\\{13}", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF MOTOROLA = { /* Motorola FasTalk II or Lifestyle */ /* "\\E" and "\\X" commands removed - Motorola Lifestyle doesn't have them. \\E0 = Don't echo while online \\X0 = Process Xon/Xoff but don't pass through */ "Motorola FasTalk II or Lifestyle", /* Name */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATE1Q0V1X4&S0&C1&D2\\\\K5\\\\V1\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0E1X4&S1\\\\K5\\\\V1\\{13}", /* wake_str */ #else "ATQ0E1X4\\\\K5\\\\V1\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT\\\\Q3\\{13}", /* hwfc_str */ "AT\\\\Q1\\{13}", /* swfc_str */ "AT\\\\Q0\\{13}", /* nofc_str */ "AT\\\\N6\\{13}", /* ec_on_str */ "AT\\\\N1\\{13}", /* ec_off_str */ "AT%C1\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "AT\\\\J0\\{13}", /* sb_on_str */ "AT\\\\J1\\{13}", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF BOCA = /* Boca */ { "BOCA 14.4 Faxmodem", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATE1Q0V1F1N1W1&S0&C1&D2\\\\K5S37=11S82=128S95=47X4\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0E1F1N1W1&S1\\\\K5S37=11S82=128S95=47X4\\{13}", /* wake_str */ #else "ATQ0E1F1N1W1\\\\K5S37=11S82=128S95=47X4\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT\\\\N3S36=7S48=7\\{13}", /* ec_on_str */ "AT\\\\N1\\{13}", /* ec_off_str */ "ATS46=138\\{13}", /* dc_on_str */ "ATS46=136\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF INTEL = /* Intel */ { "Intel High-Speed Faxmodem", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATE1Q0V1Y0X4&S0&C1&D2\\\\K1\\\\V2S25=50\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0E1Y0X4&S1\\\\K1\\\\V2S25=50\\{13}", /* wake_str */ #else "ATQ0E1Y0X4\\\\K1\\\\V2S25=50\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "ATB1+FCLASS=0\\{13}", /* dmode_str */ "OK\\{13}", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT\\\\G1\\\\Q3\\{13}", /* hwfc_str */ "AT\\\\G1\\\\Q1\\\\X0\\{13}", /* swfc_str */ "AT\\\\G0\\{13}", /* nofc_str */ "AT\\\\J0\\\\N3\\\"H3\\{13}", /* ec_on_str */ "AT\\\\N1\\{13}", /* ec_off_str */ "AT%C1\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF MULTITECH = /* Multitech */ { "Multitech MT1432 or MT2834 Series", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ /* #P0 (= no parity) is not listed in the manual for newer models */ /* so it has been removed from all three copies of the Multitech wake_str */ #ifdef OS2 "ATE1Q0V1X4&S0&C1&D2&E8&Q0\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0E1X4&S1&E8&Q0\\{13}", /* wake_str */ #else "ATQ0E1X4&E8&Q0\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&E4&E7&E8&E11&E13\\{13}", /* hwfc_str */ "AT&E5&E6&E8&E11&E13\\{13}", /* swfc_str */ "AT&E3&E7&E8&E10&E12\\{13}", /* nofc_str */ "AT&E1\\{13}", /* ec_on_str */ "AT&E0\\{13}", /* ec_off_str */ "AT&E15\\{13}", /* dc_on_str */ "AT&E14\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "AT$BA0\\{13}", /* sb_on_str (= "baud adjust off") */ "AT$BA1\\{13}", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF SUPRA = /* Supra */ { "SupraFAXModem 144 or 288", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1N1W0X4Y0&S0&C1&D2\\\\K5S82=128\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0E1N1W0X4Y0&S1\\\\K5S82=128\\{13}", /* wake_str */ #else "ATQ0E1N1W0X4Y0\\\\K5S82=128\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT&Q5\\\\N3S48=7\\{13}", /* ec_on_str */ "AT&Q0\\\\N1\\{13}", /* ec_off_str */ "AT%C1S46=138\\{13}", /* dc_on_str */ "AT%C0S46=136\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM\\{13}", /* sp_off_str */ "ATL\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF SUPRAX = /* Supra Express */ { "Diamond Supra Express V.90", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1W0X4&C1&D2&S0\\\\K5\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0E1W0X4&S1\\\\K5\\{13}", /* wake_str */ #else "ATQ0E1W0X4\\\\K5\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT\\\\N3\\{13}", /* ec_on_str */ "AT\\\\N1\\{13}", /* ec_off_str */ "AT%C2\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM\\{13}", /* sp_off_str */ "ATL\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 230400L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF MAXTECH = /* MaxTech */ { "MaxTech XM288EA or GVC FAXModem", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4Y0&S0&C1&D2&L0&M0\\\\K5\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0E1X4Y0&L0&M0&S1\\\\K5\\{13}", /* wake_str */ #else "ATQ0E1X4Y0&L0&M0\\\\K5\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT\\\\Q3\\{13}", /* hwfc_str */ "AT\\\\Q1\\\\X0\\{13}", /* swfc_str */ "AT\\\\Q0\\{13}", /* nofc_str */ "AT\\\\N6\\{13}", /* ec_on_str */ "AT\\\\N0\\{13}", /* ec_off_str */ "AT\\\\N6%C1\\{13}", /* dc_on_str */ "AT\\\\N6%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF ROLM = /* IBM / Siemens / Rolm 8000, 9000, 9751 CBX DCM */ { "IBM/Siemens/Rolm CBX Data Communications Module", "", /* pulse command */ "", /* tone command */ 60, /* dial_time */ "", /* pause_chars */ 0, /* pause_time */ "\\{13}\\{13}", /* wake_str */ 50, /* wake_rate */ "MODIFY?", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "CALL %s\\{13}", /* dial_str */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* ini2 */ 19200L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; static MDMINF USR = /* USR Courier and Sportster modems */ { "US Robotics Courier, Sportster, or compatible", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4&A3&S0&C1&D2&N0&Y3S14=0\\{13}", /* wake_str */ #else #ifdef SUNOS4 "ATQ0X4&A3&S0&N0&Y3S14=0\\{13}", /* wake_str -- needs &S0 in SunOS */ #else #ifdef VMS "ATQ0X4&A3&S1&N0&Y3S14=0\\{13}", /* wake_str -- needs &S1 in VMS */ #else "ATQ0X4&A3&N0&Y3S14=0\\{13}", /* wake_str */ #endif /* VMS */ #endif /* SUNOS4 */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&H1&R2&I0\\{13}", /* hwfc_str */ "AT&H2&R1&I2\\{13}", /* swfc_str */ "AT&H0&R1&I0\\{13}", /* nofc_str */ "AT&M4&B1\\{13}", /* ec_on_str */ "AT&M0\\{13}", /* ec_off_str */ "AT&K1\\{13}", /* dc_on_str */ "AT&K0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF USRX2 = /* USR XJ-CC1560 X2 56K */ { "US Robotics / Megahertz CC/XJ-CC1560 X2", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4&A3&S0&B2&C1&D2&N0\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0X4&A3&B2&N0&S1\\{13}", /* wake_str */ #else "ATQ0X4&A3&B2&N0\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&H1&I0\\{13}", /* hwfc_str */ "AT&H2&I2\\{13}", /* swfc_str */ "AT&H0&I0\\{13}", /* nofc_str */ "AT&M4\\{13}", /* ec_on_str */ "AT&M0\\{13}", /* ec_off_str */ "AT&K1\\{13}", /* dc_on_str */ "AT&K0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "AT&B1\\{13}", /* sb_on_str */ "AT&B0\\{13}", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF OLDTB = /* Old Telebits */ { "Telebit TrailBlazer, T1000, T1500, T2000, T2500", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 60, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "\\021AAAAATQ0E1V1X1&S0&C1&D2S12=50S50=0S54=3\\{13}", /* wake_str. */ #else #ifdef VMS "\\021AAAAATQ0X1S12=50S50=0S54=3\\{13}", /* wake_str. */ #else "\\021AAAAATQ0X1&S1S12=50S50=0S54=3\\{13}", /* wake_str. */ #endif /* VMS */ #endif /* OS2 */ 100, /* wake_rate = 100 msec */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str, Note: no T or P */ 80, /* dial_rate */ 1100, /* esc_time (guard time) */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "ATS58=2S68=2\\{13}", /* hwfc_str */ "ATS58=3S68=3S69=0\\{13}", /* swfc_str */ "ATS58=0S68=0\\{13}", /* nofc_str */ "ATS66=1S95=2\\{13}", /* ec_on_str */ "ATS95=0\\{13}", /* ec_off_str */ "ATS110=1S96=1\\{13}", /* dc_on_str */ "ATS110=0S96=0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 19200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW|CKD_TB|CKD_KS, /* capas */ getok /* ok_fn */ }; static MDMINF NEWTB = /* New Telebits */ { "Telebit T1600, T3000, QBlazer, WorldBlazer, etc.", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 60, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "\\021AAAAATQ0E1V1X2&S0&C1&D2S12=50S50=0S61=0S63=0\\{13}", /* wake_str. */ #else #ifdef VMS "\\021AAAAATQ0X2&S1S12=50S50=0S61=0S63=0\\{13}", /* wake_str. */ #else "\\021AAAAATQ0X2S12=50S50=0S61=0S63=0\\{13}", /* wake_str. */ #endif /* VMS */ #endif /* OS2 */ 100, /* wake_rate = 100 msec */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str, Note: no T or P */ 80, /* dial_rate */ 1100, /* esc_time (guard time) */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "ATS58=2S68=2\\{13}", /* hwfc_str */ "ATS58=3S68=3\\{13}", /* swfc_str */ "ATS58=0S68=0\\{13}", /* nofc_str */ "ATS180=3\\{13}", /* ec_on_str */ "ATS180=0\\{13}", /* ec_off_str */ "ATS190=1\\{13}", /* dc_on_str */ "ATS190=0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 38400L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW|CKD_TB|CKD_KS, /* capas */ getok /* ok_fn */ }; #endif /* MINIDIAL */ static MDMINF DUMMY = /* dummy information for modems that are handled elsewhere */ { "(dummy)", "", /* pulse command */ "", /* tone command */ 30, /* dial_time */ "", /* pause_chars */ 0, /* pause_time */ "", /* wake_str */ 0, /* wake_rate */ "", /* wake_prompt */ "", /* dmode_str */ NULL, /* dmode_prompt */ "%s\\{13}", /* dial_str */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* ini2 */ 0L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; #ifndef MINIDIAL static MDMINF RWV32 = /* Generic Rockwell V.32 */ { "Generic Rockwell V.32 modem", /* ATI3, ATI4, and ATI6 for details */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4Y0&S0&C1&D2%E2\\\\K5+FCLASS=0N1S37=0\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0X4Y0&S1%E2\\\\K5+FCLASS=0N1S37=0\\{13}", /* wake_str */ #else "ATQ0X4Y0%E2\\\\K5+FCLASS=0N1S37=0\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4S32=17S33=19\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT&Q6\\{13}", /* ec_on_str */ "AT&Q0\\{13}", /* ec_off_str */ "AT%C1\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF RWV32B = /* Generic Rockwell V.32bis */ { "Generic Rockwell V.32bis modem", /* ATI3, ATI4, and ATI6 for details */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4Y0&S0&C1&D2%E2\\\\K5+FCLASS=0N1S37=0\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0X4Y0&S1%E2\\\\K5+FCLASS=0N1S37=0\\{13}", /* wake_str */ #else "ATQ0X4Y0%E2\\\\K5+FCLASS=0N1S37=0\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4S32=17S33=19\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT&Q5\\{13}", /* ec_on_str */ "AT&Q0\\{13}", /* ec_off_str */ "ATS%C1\\{13}", /* dc_on_str */ "ATS%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF RWV34 = /* Generic Rockwell V.34 Data/Fax */ { "Generic Rockwell V.34 modem", /* ATI3, ATI4, and ATI6 for details */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0V1X4Y0&C1&D2&S0%E2\\\\K5+FCLASS=0\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0V1X4Y0&C1&D2&S1%E2\\\\K5+FCLASS=0\\{13}", /* wake_str */ #else "ATQ0V1X4Y0&C1&D2%E2\\\\K5+FCLASS=0\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4S32=17S33=19\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT&Q5\\{13}", /* ec_on_str */ "AT&Q0\\{13}", /* ec_off_str */ "ATS%C3\\{13}", /* dc_on_str */ "ATS%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF RWV90 = /* Generic Rockwell V.90 Data/Fax */ { "Generic Rockwell V.90 56K modem", /* ATI3, ATI4, and ATI6 for details */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0V1N1X4Y0&C1&D2&S0%E2\\\\K5+FCLASS=0S37=0\\{13}", /* K95 */ #else #ifdef VMS "ATQ0V1N1X4Y0&C1&D2&S1%E2\\\\K5+FCLASS=0S37=0\\{13}", /* wake_str */ #else "ATQ0V1N1X4Y0&C1&D2%E2\\\\K5+FCLASS=0S37=0\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4S32=17S33=19\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT&Q5\\{13}", /* ec_on_str */ "AT&Q0\\{13}", /* ec_off_str */ "AT%C3\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF MWAVE = /* IBM Mwave */ { "IBM Mwave Adapter", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4Y0&S0&C1&D2&M0&Q0&N1\\\\K3\\\\T0%E2S28=0\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0X4Y0&M0&S1&Q0&N1&S0\\\\K3\\\\T0%E2S28=0\\{13}", /* wake_str */ #else "ATQ0X4Y0&M0&Q0&N1&S0\\\\K3\\\\T0%E2S28=0\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT\\\\Q3\\{13}", /* hwfc_str */ "", /* swfc_str (it doesn't!) */ "AT\\\\Q0\\{13}", /* nofc_str */ "AT\\\\N7\\{13}", /* ec_on_str */ "AT\\\\N0\\{13}", /* ec_off_str */ "AT%C1\\\"H3\\{13}", /* dc_on_str */ "AT%C0\\\"H0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW, /* capas */ getok /* ok_fn */ }; static MDMINF TELEPATH = /* Gateway 2000 Telepath */ { "Gateway 2000 Telepath II 28.8", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4&S0&C1&D2&N0&Y2#CLS=0S13=0S15=0S19=0\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0X4&N0&S1&Y1#CLS=0S13=0S15=0S19=0\\{13}", /* wake_str */ #else "ATQ0X4&N0&Y1#CLS=0S13=0S15=0S19=0\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&H1&R2\\{13}", /* hwfc_str */ "AT&H2&I2S22=17S23=19\\{13}", /* swfc_str */ "AT&H0&I0&R1\\{13}", /* nofc_str */ "AT&M4&B1\\{13}", /* ec_on_str -- also fixes speed */ "AT&M0\\{13}", /* ec_off_str */ "AT&K1\\{13}", /* dc_on_str */ "AT&K0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF CARDINAL = /* Cardinal - based on Rockwell V.34 */ { "Cardinal MVP288X Series", /* ATI3, ATI4, and ATI6 for details */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4W1Y0%E2&S0&C1&D2\\\\K5+FCLASS=0+MS=11,1\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0X4W1Y0&S1%E2\\\\K5+FCLASS=0+MS=11,1\\{13}", /* wake_str */ #else "ATQ0X4W1Y0%E2\\\\K5+FCLASS=0+MS=11,1\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4S32=17S33=19\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT&Q5S36=7S48=7\\\\N3\\{13}", /* ec_on_str */ "AT&Q0S48=128\\\\N1\\{13}", /* ec_off_str */ "ATS46=138%C1\\{13}", /* dc_on_str */ "ATS46=136%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF LUCENT = /* Lucent Venus or Data/Fax modem */ { "Lucent Venus chipset", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0V1N1X4Y0&C1&D2&S0%E2\\\\K5+FCLASS=0S37=0\\{13}", /* K95 */ #else #ifdef VMS "ATQ0V1N1X4Y0&C1&D2&S1%E2\\\\K5+FCLASS=0S37=0\\{13}", /* VMS */ #else "ATQ0V1N1X4Y0&C1&D2%E2\\\\K5+FCLASS=0S37=0\\{13}", /* All others */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4S32=17S33=19\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT&Q5\\{13}", /* ec_on_str */ "AT&Q0\\{13}", /* ec_off_str */ "AT%C1\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF CONEXANT = /* Conexant family */ { "Conexant family of modems", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0V1X4&C1&D2&S0%E1+FCLASS=0\\{13}", /* K95 */ #else #ifdef VMS "ATQ0V1X4&C1&D2&S1%E1+FCLASS=0\\{13}", /* VMS */ #else "ATQ0V1X4&C1&D2%E1+FCLASS=0\\{13}", /* UNIX etc */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4S32=17S33=19\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT&Q5\\{13}", /* ec_on_str */ "AT&Q0\\{13}", /* ec_off_str */ "AT%C3\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF PCTEL = /* PCTel chipset */ { "PCTel chipset", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0V1N1X4Y0&C1&D2&S0%E2\\\\K5S37=0\\{13}", /* K95 */ #else #ifdef VMS "ATQ0V1N1X4Y0&C1&D2&S1%E2\\\\K5S37=0\\{13}", /* VMS */ #else "ATQ0V1N1X4Y0&C1&D2%E2\\\\K5S37=0\\{13}", /* UNIX etc */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4S32=17S33=19\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT\\\\N3\\{13}", /* ec_on_str */ "AT\\\\N0\\{13}", /* ec_off_str */ "AT%C1\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF ZOOMV34 = /* Zoom Telephonics V.34 */ { "Zoom Telephonics V.34", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0V1N1W1X4&S0&C1&D2S82=128\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0V1N1W1X4&S1S82=128\\{13}", /* wake_str */ #else "ATQ0V1N1W1X4S82=128S{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4\\{13}S32=17S33=19", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT&Q5\\{13}", /* ec_on_str */ "AT&Q0\\{13}", /* ec_off_str */ "ATS%C3\\{13}", /* dc_on_str */ "ATS%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF ZOOMV90 = /* ZOOM V.90 */ { "Zoom V.90 56K", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0V1N1X4Y0&C1&D2&S0%E2\\\\K5+FCLASS=0S37=0\\{13}", /* K95 */ #else #ifdef VMS "ATQ0V1N1X4Y0&C1&D2&S1%E2\\\\K5+FCLASS=0S37=0\\{13}", /* VMS */ #else "ATQ0V1N1X4Y0&C1&D2%E2\\\\K5+FCLASS=0S37=0\\{13}", /* All others */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4S32=17S33=19\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT&Q5\\{13}", /* ec_on_str */ "AT&Q0\\{13}", /* ec_off_str */ "AT%C1\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF ZOOMV92 = /* ZOOM V.92 */ { "Zoom V.92 with V.44 compression", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0V1N1X4Y0&C1&D2&S0%E2\\\\K5+FCLASS=0S37=0+MS=V92\\{13}", /* K95 */ #else #ifdef VMS "ATQ0V1N1X4Y0&C1&D2&S1%E2\\\\K5+FCLASS=0S37=0+MS=V92\\{13}", /* VMS */ #else "ATQ0V1N1X4Y0&C1&D2%E2\\\\K5+FCLASS=0S37=0+MS=V92\\{13}", /* All others */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4S32=17S33=19\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT&Q5\\{13}", /* ec_on_str */ "AT&Q0\\{13}", /* ec_off_str */ "AT%C1+DCS=1,1\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; /* Now the "old" modems, all grouped together, and also within "if not defined MINIDIAL"... */ #ifdef OLDMODEMS static MDMINF CERMETEK = /* Information for "Cermetek Info-Mate 212 A" modem */ { "Cermetek Info-Mate 212 A", "", /* pulse command */ "", /* tone command */ 20, /* dial_time */ "BbPpTt", /* pause_chars */ 0, /* pause_time */ " XY\\016R\\{13}", /* wake_str */ 200, /* wake_rate */ "", /* wake_prompt */ "", /* dmode_str */ NULL, /* dmode_prompt */ "\\016D '%s'\\{13}", /* dial_str */ 200, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* ini2 */ 1200L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; static MDMINF DF03 = /* information for "DEC DF03-AC" modem */ { "Digital DF03-AC", "", /* pulse command */ "", /* tone command */ 27, /* dial_time */ "=", /* pause_chars */ 15, /* pause_time */ "\\001\\002", /* wake_str */ 0, /* wake_rate */ "", /* wake_prompt */ "", /* dmode_str */ NULL, /* dmode_prompt */ "%s", /* dial_str */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* ini2 */ 0L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; static MDMINF DF100 = /* information for "DEC DF100-series" modem */ /* * The telephone "number" can include "P"s and/or "T"s * within it to indicate that subsequent digits are * to be dialed using pulse or tone dialing. The * modem defaults to pulse dialing. You may modify * the dial string below to explicitly default all * dialing to pulse or tone, but doing so prevents * the use of phone numbers that you may have stored * in the modem's memory. */ { "Digital DF-100", "", /* pulse command */ "", /* tone command */ 30, /* dial_time */ "=", /* pause_chars */ 15, /* pause_time */ "\\001", /* wake_str */ 0, /* wake_rate */ "", /* wake_prompt */ "", /* dmode_str */ NULL, /* dmode_prompt */ "%s#", /* dial_str */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* ini2 */ 0L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; static MDMINF DF200 = /* information for "DEC DF200-series" modem */ /* * The telephone "number" can include "P"s and/or "T"s * within it to indicate that subsequent digits are * to be dialed using pulse or tone dialing. The * modem defaults to pulse dialing. You may modify * the dial string below to explicitly default all * dialing to pulse or tone, but doing so prevents * the use of phone numbers that you may have stored * in the modem's memory. */ { "Digital DF-200", "", /* pulse command */ "", /* tone command */ 30, /* dial_time */ "=W", /* pause_chars */ /* =: second tone; W: 5 secs */ 15, /* pause_time */ /* worst case */ "\\002", /* wake_str */ /* allow stored number usage */ 0, /* wake_rate */ "", /* wake_prompt */ "", /* dmode_str */ NULL, /* dmode_prompt */ #ifdef COMMENT "%s!", /* dial_str */ #else " d %s\\{13}", #endif /* COMMENT */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* ini2 */ 0L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; static MDMINF GDC = /* information for "GeneralDataComm 212A/ED" modem */ { "GeneralDataComm 212A/ED", "", /* pulse command */ "", /* tone command */ 32, /* dial_time */ "%", /* pause_chars */ 3, /* pause_time */ "\\{13}\\{13}", /* wake_str */ 500, /* wake_rate */ "$", /* wake_prompt */ "D\\{13}", /* dmode_str */ ":", /* dmode_prompt */ "T%s\\{13}", /* dial_str */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* ini2 */ 1200L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; static MDMINF PENRIL = /* information for "Penril" modem */ { "Penril modem", "", /* pulse command */ "", /* tone command */ 50, /* dial_time */ "", /* pause_chars */ 0, /* pause_time */ "\\{13}\\{13}", /* wake_str */ 300, /* wake_rate */ ">", /* wake_prompt */ "k\\{13}", /* dmode_str */ ":", /* dmode_prompt */ "%s\\{13}", /* dial_str */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* ini2 */ 0L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; static MDMINF RACAL = /* Racal Vadic VA4492E */ { "Racal Vadic VA4492E", "", /* pulse command */ "", /* tone command */ 35, /* dial_time (manual says modem is hardwired to 60) */ "Kk", /* pause_chars */ 5, /* pause_time */ "\\005\\{13}", /* wake_str, ^E^M */ 50, /* wake_rate */ "*", /* wake_prompt */ "D\\{13}", /* dmode_str */ "?", /* dmode_prompt */ "%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 5, /* esc_char, ^E */ "\\003\\004", /* hup_str, ^C^D */ 0, /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* ini2 */ 0L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; static MDMINF VENTEL = /* Information for Ven-Tel modem */ { "Ven-Tel", "", /* pulse command */ "", /* tone command */ 20, /* dial_time */ "%", /* pause_chars */ 5, /* pause_time */ "\\{13}\\{13}\\{13}", /* wake_str */ 300, /* wake_rate */ "$", /* wake_prompt */ "K\\{13}", /* dmode_str (was "") */ "Number to call: ", /* dmode_prompt (was NULL) */ "%s\\{13}", /* dial_str (was "") */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* ini2 */ 0L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; static MDMINF CONCORD = /* Info for Condor CDS 220 2400b modem */ { "Concord Condor CDS 220 2400b", "", /* pulse command */ "", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ "\\{13}\\{13}", /* wake_str */ 20, /* wake_rate */ "CDS >", /* wake_prompt */ "", /* dmode_str */ NULL, /* dmode_prompt */ "", /* dial_str */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char */ "", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_off_str */ "", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* ini2 */ 2400L, /* max_speed */ 0, /* capas */ NULL /* ok_fn */ }; #endif /* OLDMODEMS */ static MDMINF MICROCOM = /* Microcom modems in native SX mode */ /* (long answer only) */ { "Microcom MNP modems in SX command mode", "DP\\{13}", /* pulse command */ "DT\\{13}", /* tone command */ 35, /* dial_time */ ",!@", /* pause_chars (! and @ aren't pure pauses) */ 3, /* pause_time */ /* The following sets 8 bits, no parity, BREAK passthru, and SE0 disables the escape character, which is a single character with no guard time, totally unsafe, so we have no choice but to disable it. Especially since, by default, it is Ctrl-A, which is Kermit's packet-start character. We would change it to something else, which would enable "mdmhup()", but the user wouldn't know about it. Very bad. Note: SE1 sets it to Ctrl-A, SE2 sets it to Ctrl-B, etc (1..31 allowed). Also SE/Q sets it to "Q". */ "SE0;S1P4;SBRK5\\{13}", /* wake_str */ 100, /* wake_rate */ "!", /* wake_prompt */ "", /* dmode_str */ NULL, /* dmode_prompt */ "D%s\\{13}", /* dial_str - number up to 39 chars */ 0, /* dial_rate */ 0, /* esc_time */ 0, /* esc_char - we can't use this */ "", /* hup_str - it's "H" but can't use */ "SF13\\{13}", /* hwfc_str */ "SF11\\{13}", /* swfc_str */ "SF10\\{13}", /* nofc_str */ "BAOFF;SMAUT\\{13}", /* ec_on_str */ "BAON;SMDIR\\{13}", /* ec_off_str */ "COMP1\\{13}", /* dc_on_str */ "COMP0\\{13}", /* dc_off_str */ "AA", /* aa_on_str */ "", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "SA2", /* sp_off_str */ "SA0", /* sp_on_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* ini2 */ 0L, /* max_speed */ CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW|CKD_KS, /* capas */ getok /* ok_fn */ }; static MDMINF MICROLINK = /* MicroLink ... */ { /* 14.4TQ,TL,PC;28.8TQ,TQV;2440T/TR */ "ELSA MicroLink 14.4, 28.8, 33.6 or 56K", /* ELSA GmbH, Aachen */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4&S0\\\\D0&C1&D2\\\\K5\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0X4&S1\\\\K5\\{13}", /* wake_str */ #else "ATQ0X4\\\\K5\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H\\{13}", /* hup_str */ "AT\\\\Q3\\{13}", /* hwfc_str */ "AT\\\\Q1\\\\X0\\{13}", /* swfc_str */ "AT\\\\Q0\\{13}", /* nofc_str */ "AT\\\\N3\\{13}", /* ec_on_str */ "AT\\\\N0\\{13}", /* ec_off_str */ "AT%C3\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "\\\\J0", /* sb_on_str (?) */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF ULINKV250 = /* MicroLink V.250 */ { /* 56Kflex, V.90; V.250 command set */ "ELSA MicroLink 56K V.250", /* ELSA GmbH, Aachen */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 /* \\D0 = DSR & CTS always on but hwfc overrides on CTS. */ "ATQ0E1V1X4&S0\\\\D0&C1&D2\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0X4&S1\\{13}", /* wake_str */ #else "ATQ0X4\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT+IFC=2,2\\{13}", /* hwfc_str */ "AT+IFC=1,1\\{13}", /* swfc_str */ "AT+IFC=0,0\\{13}", /* nofc_str */ "AT+ES=3,0\\{13}", /* ec_on_str */ "AT+ES=1,0\\{13}", /* ec_off_str */ "AT+DS=3,0,2048,32\\{13}", /* dc_on_str */ "AT+DS=0,0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str (?) */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; #endif /* MINIDIAL */ static MDMINF ITUTV250 = /* ITU-T V.250 conforming modem */ { "Any ITU-T V.25ter/V.250 conformant modem", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ "ATQ0E1V1X4&C1&D2\\{13}", /* wake_str (no &Sn in V.25) */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT+IFC=2,2\\{13}", /* hwfc_str */ "AT+IFC=1,1\\{13}", /* swfc_str */ "AT+IFC=0,0\\{13}", /* nofc_str */ "AT+ES=3,0,2;+EB=1,0,30\\{13}", /* ec_on_str */ "AT+ES=0\\{13}", /* ec_off_str */ "AT+DS=3,0\\{13}", /* dc_on_str */ "AT+DS=0,0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; #ifndef CK_TAPI static #endif /* CK_TAPI */ MDMINF GENERIC = /* Generic high speed ... */ { "Generic high-speed AT command set", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ "", /* wake_str */ 0, /* wake_rate */ "", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_on_str */ "", /* sp_off_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 115200, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW, /* capas */ getok /* ok_fn */ }; #ifndef MINIDIAL static MDMINF XJACK = /* Megahertz X-Jack */ { "Megahertz X-Jack XJ3144 / CC6144", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4N1&C1&D2\\\\K5\\{13}", /* wake_str */ #else "ATQ0X4N1\\\\K5\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT\\\\N3&Q5\\{13}", /* ec_on_str */ "AT\\\\N1&Q0\\{13}", /* ec_off_str */ "AT%C3\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF SPIRITII = /* QuickComm Spirit II */ { "QuickComm Spirit II", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ "AT&F\\{13}", /* wake_str */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H\\{13}", /* hup_str */ "AT*F3\\{13}", /* hwfc_str */ "AT*F2\\{13}", /* swfc_str */ "AT*F0\\{13}", /* nofc_str */ "AT*E6\\{13}", /* ec_on_str */ "AT*E0\\{13}", /* ec_off_str */ "AT*E9\\{13}", /* dc_on_str */ "AT*E0\\{13}", /* dc_off_str */ "ATS0=2\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF MONTANA = { /* Motorola Montana */ "Motorola Montana", /* Name */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4&S0&C1&D2\\\\K5\\\\V1\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0E1X4&S1\\\\K5\\\\V1\\{13}", /* wake_str */ #else "ATQ0E1X4\\\\K5\\\\V1\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT\\\\Q3\\{13}", /* hwfc_str */ "AT\\\\Q1\\{13}", /* swfc_str */ "AT\\\\Q0\\{13}", /* nofc_str */ "AT\\\\N4\\{13}", /* ec_on_str */ "AT\\\\N1\\{13}", /* ec_off_str */ "AT%C1\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "AT\\\\J0\\{13}", /* sb_on_str */ "AT\\\\J1\\{13}", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF COMPAQ = { /* Compaq Data+Fax Modem */ "Compaq Data+Fax Modem", /* Name */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4&S0&C1&D2\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0E1X4&S1\\{13}", /* wake_str */ #else "ATQ0E1X4\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT\\\\Q3\\{13}", /* hwfc_str (same as &K3) */ "AT\\\\Q1\\{13}", /* swfc_str (same as &K4) */ "AT\\\\Q0\\{13}", /* nofc_str (same as &K0) */ "AT\\\\N3\\{13}", /* ec_on_str */ "AT\\\\N0\\{13}", /* ec_off_str */ "AT%C1\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "AT\\\\N3\\{13}", /* sb_on_str */ "AT\\\\N1\\{13}", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL0\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF FUJITSU = { /* Fujitsu */ "Fujitsu Fax/Modem Adapter", /* Name */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4&S0&C1&D2\\\\K5\\\\N3\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0E1X4&S1\\\\K5\\\\N3\\{13}", /* wake_str */ #else "ATQ0E1X4\\\\K5\\\\N3\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\\\Q3\\{13}", /* hwfc_str */ "AT&K4\\\\Q1\\{13}", /* swfc_str */ "AT&K0\\\\Q0\\{13}", /* nofc_str */ "AT\\\\N3\\{13}", /* ec_on_str */ "AT\\\\N0\\{13}", /* ec_off_str */ "AT%C1", /* dc_on_str */ "AT%C0", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "AT\\\\J0\\{13}", /* sb_on_str */ "AT\\\\J1\\{13}", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF MHZATT = /* Megahertz AT&T V.34 */ { "Megahertz AT&T V.34", "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4N1&C1&D2\\\\K5\\{13}", /* wake_str */ #else "ATQ0X4N1\\\\K5\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT\\\\N3\\{13}", /* ec_on_str */ "AT\\\\N0\\{13}", /* ec_off_str */ "AT%C1\\\"H3\\{13}", /* dc_on_str */ "AT%C0\\\"H0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "AT\\\\J0\\{13}", /* sb_on_str */ "AT\\\\J1\\{13}", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF SUPRASON = /* SupraSonic */ { "Diamond SupraSonic 288V+", /* Diamond Multimedia Systems Inc */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1N1W0X4Y0&S0&C1&D2\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0E1N1W0X4Y0&S1\\{13}", /* wake_str */ #else "ATQ0E1N1W0X4Y0\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4\\{13}", /* swfc_str */ "AT&K\\{13}", /* nofc_str */ "AT&Q5\\\\N3S48=7\\{13}", /* ec_on_str */ "AT&Q0\\\\N1\\{13}", /* ec_off_str */ "AT%C3S46=138\\{13}", /* dc_on_str */ "AT%C0S46=136\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM\\{13}", /* sp_off_str */ "ATL\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF BESTDATA = /* Best Data */ { "Best Data Fax Modem", /* Best Data Fax Modem */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1N1W0X4Y0&S0&C1&D2\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0E1N1W0X4Y0&S1\\{13}", /* wake_str */ #else "ATQ0E1N1W0X4Y0\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4\\{13}", /* swfc_str */ "AT&K\\{13}", /* nofc_str */ "AT&Q6\\\\N3\\{13}", /* ec_on_str */ "AT&Q0\\\\N1\\{13}", /* ec_off_str */ "AT%C3\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "AT\\\\N3\\{13}", /* sb_on_str */ "AT\\\\N0\\{13}", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF ATT1900 = /* AT&T Secure Data STU III 1900 */ { "AT&T Secure Data STU III Model 1900", /* name */ "", /* pulse command */ "", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4\\{13}", /* wake_str */ #else "ATQ0E1X4\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_on_str */ "", /* sp_off_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* ini2 */ 9600L, /* max_speed */ CKD_AT|CKD_SB|CKD_HW, /* capas */ getok /* ok_fn */ }; /* Experimentation showed that hardly any of the documented commands did anything other that print ERROR. At first there was no communication at all at 9600 bps -- turns out the interface speed was stuck at 2400. ATS28=130 (given at 2400 bps) allowed it to work at 9600. */ static MDMINF ATT1910 = /* AT&T Secure Data STU III 1910 */ { /* Adds V.32bis, V.42, V.42bis */ "AT&T Secure Data STU III Model 1910", /* name */ /* Believe it or not, "ATT" and "ATP" result in ERROR */ "", /* pulse command */ "", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0E1V1X4\\{13}", /* wake_str */ #else "ATQ0E1X4\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ #ifdef COMMENT /* These are evidently read-only registers */ "ATS46=138S47=0\\{13}", /* ec_on_str */ "ATS46=138S47=128\\{13}", /* ec_off_str */ "ATS46=138S47=0\\{13}", /* dc_on_str */ "ATS46=138S47=128\\{13}", /* dc_off_str */ #else "", "", "", "", #endif /* COMMENT */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_on_str */ "", /* sp_off_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* ini2 */ 9600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW, /* capas */ getok /* ok_fn */ }; static MDMINF KEEPINTOUCH = /* AT&T KeepinTouch Card Modem */ { "AT&T KeepinTouch V.32bis Card Modem", /* Name */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 /* This used to include &C1&S0&D2+Q0 but that gives ERROR */ "ATQ0E1V1X4&S0&C1&D2\\\\K5\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0E1X4&S1\\\\K5\\{13}", /* wake_str */ #else "ATQ0E1X4\\\\K5\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT\\\\Q3\\{13}", /* hwfc_str */ "AT\\\\Q1\\\\X0\\{13}", /* swfc_str */ "AT\\\\Q0\\{13}", /* nofc_str */ "AT\\\\N3-J1\\{13}", /* ec_on_str */ "AT\\\\N1\\{13}", /* ec_off_str */ "AT%C3\\\"H3\\{13}", /* dc_on_str */ "AT%C0\\\"H0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "ATN0\\\\J0\\{13}", /* sb_on_str */ "ATN1\\\\J1\\{13}", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 57600L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF ROLM_AT = /* Rolm data phone with AT command set */ { "Rolm 244PC or 600 Series with AT Command Set", "", /* pulse command */ "", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATE1Q0V1\\{13}", /* wake_str */ #else "ATQ0\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATDT%s\\{13}", /* dial_str -- always Tone */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "", /* hwfc_str */ "", /* swfc_str */ "", /* nofc_str */ "", /* ec_on_str */ "", /* ec_off_str */ "", /* dc_on_str */ "", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "", /* sb_on_str */ "", /* sb_off_str */ "", /* sp_on_str */ "", /* sp_off_str */ "", /* vol1_str */ "", /* vol2_str */ "", /* vol3_str */ "", /* ignoredt */ "", /* ini2 */ 19200L, /* max_speed */ CKD_AT, /* capas */ getok /* ok_fn */ }; static MDMINF ATLAS = /* Atlas / Newcom ixfC 33.6 */ { "Atlas / Newcom 33600ixfC Data/Fax Modem", /* Name */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATZ0&FQ0V1&C1&D2\\{13}", /* wake_str */ #else "ATZ0&FQ0V1\\{13}", /* wake_str */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT\\\"H3\\{13}", /* ec_on_str */ "AT\\\"H0\\{13}", /* ec_off_str */ "AT%C1\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "ATN0\\\\J0\\{13}", /* sb_on_str */ "ATN1\\\\J1\\{13}", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF CODEX = { /* Motorola Codex */ "Motorola Codex 326X Series", /* Name - AT&V to see settings */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 /* &M0=Async (not sync) */ /* *MM0=Automatic modulation negotiation */ /* *DE22=Automatic data rate */ "ATZQ0E1V1X4Y0*DE22*MM0&C1&M0&S0&D2\\{13}", /* wake_str */ #else #ifdef VMS "ATZQ0E1V1X4Y0*DE22*MM0&C1&M0&S1\\{13}", /* wake_str */ #else "ATZQ0E1V1X4Y0*DE22*MM0&C1&M0\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT*MF1*FL3\\{13}", /* hwfc_str */ "AT*MF1*FL1\\{13}", /* swfc_str */ "AT*MF0*FL0\\{13}", /* nofc_str */ "AT*EC0*SM3*SC0\\{13}", /* ec_on_str */ "AT*SM0\\{13}", /* ec_off_str */ "AT*DC1\\{13}", /* dc_on_str */ "AT*DC0\\{13}", /* dc_off_str */ "AT*AA5S0=1\\{13}", /* aa_on_str */ "AT*AA5S0=0\\{13}", /* aa_off_str */ "AT*SC1\\{13}", /* sb_on_str */ "AT*SC0\\{13}", /* sb_off_str */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3*BD2\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF MT5634ZPX = /* Multitech */ { "Multitech MT5634ZPX", /* name */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATE1Q0V1X4&S0&C1&D2&Q0\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0E1X4&S1&Q0\\{13}", /* wake_str */ #else "ATQ0E1X4&Q0\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT&K3\\{13}", /* hwfc_str */ "AT&K4\\{13}", /* swfc_str */ "AT&K0\\{13}", /* nofc_str */ "AT\\\\N3\\{13}", /* ec_on_str */ "AT\\\\N1\\{13}", /* ec_off_str */ "AT%C1\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "AT\\\\J0\\{13}", /* sb_on_str */ "AT\\\\J1\\{13}", /* sb_off_str (NOT SUPPORTED) */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; static MDMINF MOTSM56 = /* Motorola SM56 Chipset */ { "Motorola SM56 V.90 chipset", /* name */ "ATP\\{13}", /* pulse command */ "ATT\\{13}", /* tone command */ 35, /* dial_time */ ",", /* pause_chars */ 2, /* pause_time */ #ifdef OS2 "ATQ0V1X4&S0&C1&D2*MM16\\{13}", /* wake_str */ #else #ifdef VMS "ATQ0V1X4&S1&C1&D2*MM16\\{13}", /* wake_str */ #else "ATQ0V1X4&C1&D2*MM16\\{13}", /* wake_str */ #endif /* VMS */ #endif /* OS2 */ 0, /* wake_rate */ "OK\\{13}", /* wake_prompt */ "", /* dmode_str */ "", /* dmode_prompt */ "ATD%s\\{13}", /* dial_str */ 0, /* dial_rate */ 1100, /* esc_time */ 43, /* esc_char */ "ATQ0H0\\{13}", /* hup_str */ "AT\\\\Q3\\{13}", /* hwfc_str */ "AT\\\\Q1\\{13}", /* swfc_str */ "AT\\\\Q0\\{13}", /* nofc_str */ "AT\\\\N7\\{13}", /* ec_on_str */ "AT\\\\N1\\{13}", /* ec_off_str */ "AT%C1\\{13}", /* dc_on_str */ "AT%C0\\{13}", /* dc_off_str */ "ATS0=1\\{13}", /* aa_on_str */ "ATS0=0\\{13}", /* aa_off_str */ "AT\\\\J0\\{13}", /* sb_on_str */ "AT\\\\J1\\{13}", /* sb_off_str (NOT SUPPORTED) */ "ATM1\\{13}", /* sp_on_str */ "ATM0\\{13}", /* sp_off_str */ "ATL1\\{13}", /* vol1_str */ "ATL2\\{13}", /* vol2_str */ "ATL3\\{13}", /* vol3_str */ "ATX3\\{13}", /* ignoredt */ "", /* ini2 */ 115200L, /* max_speed */ CKD_AT|CKD_SB|CKD_EC|CKD_DC|CKD_HW|CKD_SW, /* capas */ getok /* ok_fn */ }; #endif /* MINIDIAL */ /* END MDMINF STRUCT DEFINITIONS */ #endif /* 1120_MODEMS */ /* END MDMINF STRUCT DEFINITIONS */ /* Table to convert modem numbers to MDMINF struct pointers. The entries MUST be in ascending order by modem number, without any "gaps" in the numbers, and starting from one (1). */ MDMINF *modemp[] = { NULL, /* 0 */ #ifdef MINIDIAL &CCITT, /* 1 */ &HAYES, /* 2 */ &UNKNOWN, /* 3 */ &DUMMY, /* 4 */ &GENERIC, /* 5 */ &ITUTV250, /* 6 */ #else &ATTDTDM, /* 1 */ &ATTISN, /* 2 */ &ATTMODEM, /* 3 */ &CCITT, /* 4 */ #ifdef OLDMODEMS &CERMETEK, /* 5 */ &DF03, /* 6 */ &DF100, /* 7 */ &DF200, /* 8 */ &GDC, /* 9 */ #else NULL, NULL, NULL, NULL, NULL, #endif /* OLDMODEMS */ &HAYES, /* 10 */ #ifdef OLDMODEMS &PENRIL, /* 11 */ &RACAL, /* 12 */ #else NULL, NULL, #endif /* OLDMODEMS */ &UNKNOWN, /* 13 */ #ifdef OLDMODEMS &VENTEL, /* 14 */ &CONCORD, /* 15 */ #else NULL, NULL, #endif /* OLDMODEMS */ &DUMMY, /* 16 */ &ROLM, /* 17 */ #ifdef OLDMODEMS &MICROCOM, /* 18 */ #else NULL, #endif /* OLDMODEMS */ &USR, /* 19 USR Courier and Sportster */ &OLDTB, /* 20 Old Telebits */ &DIGITEL, /* 21 Digitel CCITT */ &H_1200, /* 22 Hayes 1200 */ &H_ULTRA, /* 23 Hayes Ultra */ &H_ACCURA, /* 24 Hayes Optima */ &PPI, /* 25 PPI */ &DATAPORT, /* 26 Dataport */ &BOCA, /* 27 Boca */ &MOTOROLA, /* 28 Motorola UDS MOTOROLA */ NULL, /* 29 Digicomm */ NULL, /* 30 Dynalink */ &INTEL, /* 31 Intel */ &UCOM_AT, /* 32 Microcom in AT mode */ &MULTITECH, /* 33 Multitech */ &SUPRA, /* 34 Supra */ &ZOLTRIX, /* 35 Zoltrix */ &ZOOM, /* 36 Zoom */ &ZYXEL, /* 37 ZyXEL */ &DUMMY, /* 38 TAPI */ #ifdef OLDTBCODE &TELEBIT, #else &NEWTB, /* 39 New-Telebit */ #endif /* OLDTBCODE */ &MAXTECH, /* 40 MaxTech */ &DUMMY, /* 41 User-defined */ &RWV32, /* 42 Rockwell V.32 */ &RWV32B, /* 43 Rockwell V.32bis */ &RWV34, /* 44 Rockwell V.34 */ &MWAVE, /* 45 IBM Mwave */ &TELEPATH, /* 46 Gateway 2000 Telepath II 28.8 */ &MICROLINK, /* 47 MicroLink modems */ &CARDINAL, /* 48 Cardinal */ &GENERIC, /* 49 Generic high-speed */ &XJACK, /* 50 Megahertz-Xjack */ &SPIRITII, /* 51 QuickComm Spirit II */ &MONTANA, /* 52 Motorola Montana */ &COMPAQ, /* 53 Compaq Data+Fax */ &FUJITSU, /* 54 Fujitsu */ &MHZATT, /* 55 Megahertz AT&T V.34 */ &SUPRASON, /* 56 Suprasonic */ &BESTDATA, /* 57 Best Data */ &ATT1900, /* 58 AT&T Secure Data STU III 1900 */ &ATT1910, /* 59 AT&T Secure Data STU III 1910 */ &KEEPINTOUCH, /* 60 AT&T KeepInTouch */ &USRX2, /* 61 USR XJ-1560 X2 */ &ROLM_AT, /* 62 Rolm with AT command set */ &ATLAS, /* 63 Atlas / Newcom */ &CODEX, /* 64 Motorola Codex */ &MT5634ZPX, /* 65 Multitech MT5634ZPX */ &ULINKV250, /* 66 Microlink V.250 56K */ &ITUTV250, /* 67 Generic ITU-T V.250 */ &RWV90, /* 68 Rockwell V.90 56K */ &SUPRAX, /* 69 Diamond Supra Express V.90 */ &LUCENT, /* 70 Lucent Venus chipset */ &PCTEL, /* 71 PCTel */ &CONEXANT, /* 72 Conexant */ &ZOOMV34, /* 73 Zoom V.34 */ &ZOOMV90, /* 74 Zoom V.90 */ &ZOOMV92, /* 75 Zoom V.92 */ &MOTSM56 /* 76 Motorola SM56 chipset */ #endif /* MINIDIAL */ }; /* * Declare modem names and associated numbers for command parsing, * and also for doing number-to-name translation. * * The entries must be in alphabetical order by modem name. */ struct keytab mdmtab[] = { #ifndef MINIDIAL "3com-usr-megahertz-56k", n_USRX2, 0, "atlas-newcom-33600ifxC", n_ATLAS, 0, "att-1900-stu-iii", n_ATT1900, 0, "att-1910-stu-iii", n_ATT1910, 0, "att-7300", n_ATTUPC, 0, "att-dataport", n_DATAPORT, 0, "att-dtdm", n_ATTDTDM, 0, "att-isn", n_ATTISN, 0, "att-keepintouch", n_KEEPINTOUCH, 0, "att-switched-net", n_ATTMODEM, 0, "att7300", n_ATTUPC, CM_INV, /* old name */ "attdtdm", n_ATTDTDM, CM_INV, /* old name */ "attisn", n_ATTISN, CM_INV, /* old name */ "attmodem", n_ATTMODEM, CM_INV, /* old name */ "bestdata", n_BESTDATA, 0, "boca", n_BOCA, 0, "cardinal", n_CARDINAL, 0, #endif /* MINIDIAL */ "ccitt-v25bis", n_CCITT, CM_INV, /* Name changed to ITU-T */ #ifndef MINIDIAL #ifdef OLDMODEMS "cermetek", n_CERMETEK, M_OLD, #endif /* OLDMODEMS */ "compaq", n_COMPAQ, 0, #ifdef OLDMODEMS "concord", n_CONCORD, M_OLD, #endif /* OLDMODEMS */ "conexant", n_CONEXANT, 0, "courier", n_USR, CM_INV, "dataport", n_DATAPORT, CM_INV, /* == att-dataport */ #ifdef OLDMODEMS "df03-ac", n_DF03, M_OLD, "df100-series", n_DF100, M_OLD, "df200-series", n_DF200, M_OLD, #endif /* OLDMODEMS */ "digitel-dt22", n_DIGITEL, 0, #endif /* MINIDIAL */ "direct", 0, CM_INV, /* Synonym for NONE */ #ifndef MINIDIAL "fujitsu", n_FUJITSU, 0, "gateway-telepath", n_TELEPATH, 0, #ifdef OLDMODEMS "gdc-212a/ed", n_GDC, M_OLD, "ge", n_GENERIC, CM_INV|CM_ABR, "gen", n_GENERIC, CM_INV|CM_ABR, "gendatacomm", n_GDC, CM_INV, /* Synonym for GDC */ #endif /* OLDMODEMS */ #endif /* MINIDIAL */ "generic-high-speed", n_GENERIC, 0, "h", n_HAYES, CM_INV|CM_ABR, "ha", n_HAYES, CM_INV|CM_ABR, "hay", n_HAYES, CM_INV|CM_ABR, "haye", n_HAYES, CM_INV|CM_ABR, "hayes", n_HAYES, CM_INV|CM_ABR, /* Hayes 2400 */ #ifndef MINIDIAL "hayes-1200", n_H_1200, 0, #endif /* MINIDIAL */ "hayes-2400", n_HAYES, 0, #ifndef MINIDIAL "hayes-high-speed", n_H_ACCURA, 0, "hayes-accura", n_H_ACCURA, CM_INV, "hayes-optima", n_H_ACCURA, CM_INV, "hayes-ultra", n_H_ULTRA, CM_INV, "hst-courier", n_USR, CM_INV, /* Synonym for COURIER */ "intel", n_INTEL, 0, #endif /* MINIDIAL */ "itu-t-v250", n_ITUTV250, CM_INV, "itu-t-v25ter/v250",n_ITUTV250, 0, "itu-t-v25bis", n_CCITT, 0, /* New name for CCITT */ #ifndef MINIDIAL "lucent", n_LUCENT, 0, "maxtech", n_MAXTECH, 0, "megahertz-att-v34",n_MHZATT, 0, "megahertz-xjack", n_XJACK, 0, "megahertz-xjack-33.6", n_XJACK, 0, "megahertz-xjack-56k", n_USRX2, 0, /* 3COM/USR/Megahertz 33.6 PC Card */ "mi", n_MICROCOM, CM_INV|CM_ABR, "mic", n_MICROCOM, CM_INV|CM_ABR, "micr", n_MICROCOM, CM_INV|CM_ABR, "micro", n_MICROCOM, CM_INV|CM_ABR, "microc", n_MICROCOM, CM_INV|CM_ABR, "microco", n_MICROCOM, CM_INV|CM_ABR, "microcom", n_MICROCOM, CM_INV|CM_ABR, "microcom-at-mode", n_UCOM_AT, 0, /* Microcom DeskPorte, etc */ "microcom-sx-mode", n_MICROCOM, 0, /* Microcom AX,QX,SX, native mode */ "microlink", n_MICROLINK, 0, "microlink-v250", n_ULINKV250, 0, "motorola-codex", n_CODEX, 0, "motorola-fastalk", n_MOTOROLA, 0, "motorola-lifestyle",n_MOTOROLA, 0, "motorola-montana", n_MONTANA, 0, "motorola-sm56-v90",n_MOTSM56, 0, "mt5634zpx", n_MT5634ZPX, 0, "multitech", n_MULTI, 0, "mwave", n_MWAVE, 0, #endif /* MINIDIAL */ "none", 0, 0, #ifndef MINIDIAL #ifndef OLDTBCODE "old-telebit", n_TELEBIT, 0, #endif /* OLDTBCODE */ "pctel", n_PCTEL, 0, #ifdef OLDMODEMS "penril", n_PENRIL, M_OLD, #endif /* OLDMODEMS */ "ppi", n_PPI, 0, #ifdef OLDMODEMS "racalvadic", n_RACAL, M_OLD, #endif /* OLDMODEMS */ "rockwell-v32", n_RWV32, 0, "rockwell-v32bis", n_RWV32B, 0, "rockwell-v34", n_RWV34, 0, "rockwell-v90", n_RWV90, 0, "rolm-244pc", n_ROLMAT, 0, "rolm-600-series", n_ROLMAT, 0, "rolm-dcm", n_ROLM, 0, "spirit-ii", n_SPIRITII, 0, "sportster", n_USR, CM_INV, "sup", n_SUPRA, CM_INV|CM_INV, "supr", n_SUPRA, CM_INV|CM_INV, "supra", n_SUPRA, CM_INV|CM_INV, "supra-express-v90",n_SUPRAX, 0, "suprafaxmodem", n_SUPRA, 0, "suprasonic", n_SUPRASON, 0, #ifdef CK_TAPI "tapi", n_TAPI, 0, #endif /* CK_TAPI */ "te", n_TBNEW, CM_INV|CM_ABR, "tel", n_TBNEW, CM_INV|CM_ABR, "telebit", n_TBNEW, 0, "telepath", n_TELEPATH, CM_INV, #endif /* MINIDIAL */ "unknown", n_UNKNOWN, 0, "user-defined", n_UDEF, 0, #ifndef MINIDIAL "usr", n_USR, CM_INV|CM_ABR, /* Keep the next one for backwards compatibility, but it's the same as H2400 */ "usr-212a", n_HAYES, CM_INV, "usr-courier", n_USR, CM_INV, "usr-megahertz-56k", n_USRX2, 0, "usr-sportster", n_USR, CM_INV, "usr-xj1560-x2", n_USRX2, 0, "usrobotics", n_USR, 0, "v25bis", n_CCITT, CM_INV, /* Name changed to ITU-T */ #ifdef OLDMODEMS "ventel", n_VENTEL, M_OLD, #endif /* OLDMODEMS */ "zoltrix", n_ZOLTRIX, 0, "zoltrix-v34", n_ZOLTRIX, 0, "zoltrix-hcf-v90", n_ITUTV250, 0, "zoom", n_ZOOM, 0, "zoom-v32bis", n_ZOOM, 0, "zoom-v34", n_ZOOMV34, 0, "zoom-v90", n_ZOOMV90, 0, "zoom-v92", n_ZOOMV92, 0, "zyxel", n_ZYXEL, 0, #endif /* MINIDIAL */ "", 0, 0 }; int nmdm = (sizeof(mdmtab) / sizeof(struct keytab)) - 1; /* Number of modems */ MDMINF * FindMdmInf( char * name ) { int i; for ( i=0;i_pulse_str, mdminf->pulse ? mdminf->pulse : "" ); strcpy( modem->_tone_str, mdminf->tone ? mdminf->tone : ""); strcpy( modem->_init_str, mdminf->wake_str ? mdminf->wake_str : ""); strcpy( modem->_dial_mode_str, mdminf->dmode_str ? mdminf->dmode_str : "" ); strcpy( modem->_dial_mode_prompt_str, mdminf->dmode_prompt ? mdminf->dmode_prompt : "" ); strcpy( modem->_dial_str, mdminf->dial_str ? mdminf->dial_str : "" ); modem->_escape_char = mdminf->esc_char ; strcpy( modem->_hup_str, mdminf->hup_str ? mdminf->hup_str : "" ); strcpy( modem->_hwfc_str, mdminf->hwfc_str ? mdminf->hwfc_str : "" ); strcpy( modem->_swfc_str, mdminf->swfc_str ? mdminf->swfc_str : "" ); strcpy( modem->_nofc_str, mdminf->nofc_str ? mdminf->nofc_str : "" ); strcpy( modem->_ec_on_str, mdminf->ec_on_str ? mdminf->ec_on_str : "" ); strcpy( modem->_ec_off_str, mdminf->ec_off_str ? mdminf->ec_off_str : "" ); strcpy( modem->_dc_on_str, mdminf->dc_on_str ? mdminf->dc_on_str : "" ); strcpy( modem->_dc_off_str, mdminf->dc_off_str ? mdminf->dc_off_str : "" ); strcpy( modem->_aa_on_str, mdminf->aa_on_str ? mdminf->aa_on_str : "" ); strcpy( modem->_aa_off_str, mdminf->aa_off_str ? mdminf->aa_off_str : "" ); strcpy( modem->_sb_on_str, mdminf->sb_on_str ? mdminf->sb_on_str : "" ); strcpy( modem->_sb_off_str, mdminf->sb_off_str ? mdminf->sb_off_str : "" ); strcpy( modem->_sp_on_str, mdminf->sp_on_str ? mdminf->sp_on_str : "" ); strcpy( modem->_sp_off_str, mdminf->sp_off_str ? mdminf->sp_off_str : "" ); strcpy( modem->_vol1_str, mdminf->vol1_str ? mdminf->vol1_str : "" ); strcpy( modem->_vol2_str, mdminf->vol2_str ? mdminf->vol2_str : "" ); strcpy( modem->_vol3_str, mdminf->vol3_str ? mdminf->vol3_str : "" ); strcpy( modem->_ignore_dial_tone_str, mdminf->ignoredt ? mdminf->ignoredt : "" ); modem->_at = (mdminf->capas & CKD_AT ) != 0; modem->_v25= (mdminf->capas & CKD_V25) != 0; modem->_sb = (mdminf->capas & CKD_SB ) != 0; modem->_ec = (mdminf->capas & CKD_EC ) != 0; modem->_dc = (mdminf->capas & CKD_DC ) != 0; modem->_hw = (mdminf->capas & CKD_HW ) != 0; modem->_sw = (mdminf->capas & CKD_SW ) != 0; modem->_ks = (mdminf->capas & CKD_KS ) != 0; modem->_tb = (mdminf->capas & CKD_TB ) != 0; modem->_max_speed = mdminf->max_speed; } } ZIL_ICHAR K_MODEM_DIALOG::_className[] = "K_MODEM_DIALOG" ; ZIL_ICHAR K_MODEM_CONFIG::_className[] = "K_MODEM_CONFIG" ; extern K_CONNECTOR * connector; K_MODEM_DIALOG::K_MODEM_DIALOG(void) : ZAF_DIALOG_WINDOW("WINDOW_MODEMS",defaultStorage) { windowManager->Center(this) ; relative.bottom = relative.Height() - 1 ; relative.top = 0 ; } K_MODEM_DIALOG::K_MODEM_DIALOG( UI_LIST * ModemList ) : ZAF_DIALOG_WINDOW("WINDOW_MODEMS",defaultStorage),SourceList(ModemList) { windowManager->Center(this) ; _modem_list = (UIW_VT_LIST *) Get( LIST_NAME ); UIW_COMBO_BOX * combo = (UIW_COMBO_BOX *) Get(COMBO_NAME); K_MODEM * item = NULL; K_MODEM * newitem = NULL; UI_EVENT AddObject( S_ADD_OBJECT ); _current = NULL; for ( item = (K_MODEM *) ModemList->First(); item ; item = (K_MODEM *) item->Next() ) { newitem = new K_MODEM( *item ); newitem->DataSet( newitem->_name ); newitem->_dialog = this; AddObject.data = newitem; //*_modem_list + newitem ; _modem_list->Event(AddObject); if ( item == ModemList->Current() ) { _modem_list->SetCurrent( newitem ); *combo + newitem; _current = newitem; } } if ( _current == NULL ) { _current = (K_MODEM *) _modem_list->First(); if ( _current ) { _modem_list->SetCurrent( _current ); *combo + _current; } } if ( _current ) { *combo + _current; if ( _current->_is_tapi ) { UIW_BUTTON * button = (UIW_BUTTON *) Get( BUTTON_MODIFY ); if ( button ) { button->woFlags |= WOF_NON_SELECTABLE ; button->Information(I_CHANGED_FLAGS,NULL) ; } } } #ifdef WIN32 Information( I_SET_TEXT, "Kermit 95 Modem Definitions" ) ; #else Information( I_SET_TEXT, "Kermit 95 for OS/2 Modem Definitions" ) ; #ifdef COMMENT UIW_ICON * icon = (UIW_ICON *) Get( ICON_K95 ) ; *this - icon ; delete icon ; icon = new UIW_ICON( 0,0,"CKNKER","K95/2 Modems", ICF_MINIMIZE_OBJECT ); *this + icon ; #endif /* COMMENT */ #endif /* WIN32 */ InitParityList(); InitStopBitsList(); InitFlowList(); InitSpeedList(); #if defined(WIN32) if ( _current && _current->_is_tapi ) InitTapiPortList(); else #endif InitPortList(); InitModemTypeList(); CopyValuesFromCurrent(); if ( combo->Count() <= 1 ) { UIW_BUTTON * button = (UIW_BUTTON *) Get( BUTTON_REMOVE ); if ( button ) { button->woFlags |= WOF_NON_SELECTABLE ; button->Information(I_CHANGED_FLAGS,NULL) ; } } } void K_MODEM_DIALOG::CopyValuesFromCurrent() { UIW_COMBO_BOX * combo ; UIW_BUTTON * button; ZIL_ICHAR itoabuf[40] ; if ( _current == NULL ) return ; /* need to configure window settings */ combo = (UIW_COMBO_BOX *) Get( COMBO_PORT ) ; combo->DataSet( _current->_port ); combo->woFlags |= WOF_AUTO_CLEAR ; combo->Information(I_CHANGED_FLAGS,NULL) ; combo = (UIW_COMBO_BOX *) Get( COMBO_TYPE ) ; combo->DataSet( _current->_type ); combo->woFlags |= WOF_AUTO_CLEAR ; combo->Information(I_CHANGED_FLAGS,NULL) ; combo = (UIW_COMBO_BOX *) Get( COMBO_SPEED ) ; itoa( _current->_speed, itoabuf, 10 ) ; combo->DataSet( itoabuf ) ; combo->woFlags |= WOF_AUTO_CLEAR ; combo->Information(I_CHANGED_FLAGS,NULL) ; combo = (UIW_COMBO_BOX *) Get( COMBO_PARITY ) ; switch ( _current->_parity ) { case NO_PARITY: combo->DataSet("None"); break; case SPACE: combo->DataSet("Space"); break; case MARK: combo->DataSet("Mark"); break; case EVEN: combo->DataSet("Even"); break; case ODD: combo->DataSet("Odd"); break; case SPACE_8: combo->DataSet("Space_8bit"); break; case MARK_8: combo->DataSet("Mark_8bit"); break; case EVEN_8: combo->DataSet("Even_8Bit"); break; case ODD_8: combo->DataSet("Odd_8bit"); break; } combo->woFlags |= WOF_AUTO_CLEAR ; combo->Information(I_CHANGED_FLAGS,NULL) ; combo = (UIW_COMBO_BOX *) Get( COMBO_FLOW ) ; switch ( _current->_flow ) { case NO_FLOW: combo->DataSet("None"); break; case XON_XOFF: combo->DataSet("Xon/Xoff"); break; case RTS_CTS: combo->DataSet("Rts/Cts"); break; case AUTO_FLOW: combo->DataSet("Auto"); break; } combo->woFlags |= WOF_AUTO_CLEAR ; combo->Information(I_CHANGED_FLAGS,NULL) ; button = (UIW_BUTTON *) Get( CHECK_ERROR_CORRECTION ); if ( _current->_correction ) button->woStatus |= WOS_SELECTED ; else button->woStatus &= ~WOS_SELECTED ; button->Information(I_CHANGED_FLAGS,NULL); button = (UIW_BUTTON *) Get( CHECK_COMPRESSION ); if ( _current->_compression ) button->woStatus |= WOS_SELECTED ; else button->woStatus &= ~WOS_SELECTED ; button->Information(I_CHANGED_FLAGS,NULL); button = (UIW_BUTTON *) Get( CHECK_CARRIER ); if ( _current->_carrier ) button->woStatus |= WOS_SELECTED ; else button->woStatus &= ~WOS_SELECTED ; button->Information(I_CHANGED_FLAGS,NULL); button = (UIW_BUTTON *) Get( CHECK_SPEED_MATCHING ); if ( _current->_speed_match ) button->woStatus |= WOS_SELECTED ; else button->woStatus &= ~WOS_SELECTED ; button->Information(I_CHANGED_FLAGS,NULL); button = (UIW_BUTTON *) Get( CHECK_SPEAKER ); if ( _current->_speaker ) button->woStatus |= WOS_SELECTED ; else button->woStatus &= ~WOS_SELECTED ; button->Information(I_CHANGED_FLAGS,NULL); UIW_SCROLL_BAR * slider = (UIW_SCROLL_BAR *) Get( SLIDER_VOLUME ); int value = _current->_volume; slider->Information( I_SET_VALUE, &value ); if ( _current->_speaker ) slider->woFlags &= ~WOF_NON_SELECTABLE ; else slider->woFlags |= WOF_NON_SELECTABLE ; combo->Information(I_CHANGED_FLAGS,NULL) ; combo = (UIW_COMBO_BOX *) Get( COMBO_STOPBITS ) ; switch ( _current->_stopbits ) { case STOPBITS_1_0: combo->DataSet("1.0"); break; case STOPBITS_1_5: combo->DataSet("1.5"); break; case STOPBITS_2_0: combo->DataSet("2.0"); break; } combo->woFlags |= WOF_AUTO_CLEAR ; combo->Information(I_CHANGED_FLAGS,NULL) ; } void K_MODEM_DIALOG::CopyValuesToCurrent() { UIW_COMBO_BOX * combo ; ZIL_ICHAR * str; if ( _current == NULL ) return ; /* need to configure window settings */ combo = (UIW_COMBO_BOX *) Get( COMBO_PORT ) ; strncpy(_current->_port, combo->DataGet(), 60 ); combo = (UIW_COMBO_BOX *) Get( COMBO_TYPE ) ; strncpy(_current->_type, combo->DataGet(), 60 ); _current->_is_tapi = !strcmp("tapi",_current->_type); combo = (UIW_COMBO_BOX *) Get( COMBO_SPEED ) ; _current->_speed = atoi( combo->DataGet() ); combo = (UIW_COMBO_BOX *) Get( COMBO_PARITY ) ; str = combo->DataGet(); if ( !strcmp( str, "None" ) ) _current->_parity = NO_PARITY; else if ( !strcmp( str, "Space" ) ) _current->_parity = SPACE; else if ( !strcmp( str, "Mark") ) _current->_parity = MARK; else if ( !strcmp(str, "Even") ) _current->_parity = EVEN; else if ( !strcmp( str, "Odd") ) _current->_parity = ODD; else if ( !strcmp( str, "Space_8bit" ) ) _current->_parity = SPACE_8; else if ( !strcmp( str, "Mark_8bit") ) _current->_parity = MARK_8; else if ( !strcmp(str, "Even_8bit") ) _current->_parity = EVEN_8; else if ( !strcmp( str, "Odd_8bit") ) _current->_parity = ODD_8; combo = (UIW_COMBO_BOX *) Get( COMBO_FLOW ) ; str = combo->DataGet(); if ( !strcmp( str, "None" ) ) _current->_flow = NO_FLOW; else if ( !strcmp( str, "Xon/Xoff" ) ) _current->_flow = XON_XOFF; else if ( !strcmp( str, "Rts/Cts") ) _current->_flow = RTS_CTS; else if ( !strcmp(str, "Auto") ) _current->_flow = AUTO_FLOW; _current->_correction = FlagSet(Get( CHECK_ERROR_CORRECTION )->woStatus, WOS_SELECTED ); _current->_compression = FlagSet(Get( CHECK_COMPRESSION )->woStatus, WOS_SELECTED ); _current->_carrier = FlagSet(Get( CHECK_CARRIER )->woStatus, WOS_SELECTED ); _current->_speed_match = FlagSet(Get( CHECK_SPEED_MATCHING )->woStatus, WOS_SELECTED ); _current->_speaker = FlagSet(Get( CHECK_SPEAKER )->woStatus, WOS_SELECTED ); UIW_SCROLL_BAR * slider = (UIW_SCROLL_BAR *) Get( SLIDER_VOLUME ); int value; slider->Information( I_GET_VALUE, &value ); _current->_volume = value ; combo = (UIW_COMBO_BOX *) Get( COMBO_STOPBITS ) ; str = combo->DataGet(); if ( !strcmp( str, "1.0" ) ) _current->_stopbits = STOPBITS_1_0; else if ( !strcmp( str, "1.5" ) ) _current->_stopbits = STOPBITS_1_5; else if ( !strcmp( str, "2.0" ) ) _current->_stopbits = STOPBITS_2_0; } void K_MODEM_DIALOG::AddModem( ZIL_ICHAR * name ) { K_MODEM * newitem; if ( _current ) { CopyValuesToCurrent(); newitem = new K_MODEM(*_current); } else newitem = new K_MODEM(); strcpy( newitem->_name, name ); newitem->DataSet( name ); newitem->_dialog = this; UIW_COMBO_BOX * combo = (UIW_COMBO_BOX *) Get(COMBO_NAME); UI_EVENT AddObject(S_ADD_OBJECT) ; AddObject.data = newitem ; _modem_list->Event(AddObject); combo->Event(AddObject); //*_modem_list + newitem; UI_EVENT ReDisplay(S_REDISPLAY) ; UI_EVENT Create(S_CREATE) ; combo->Event( Create ); combo->Event( ReDisplay ); #ifdef __OS2__ combo->Information(I_CHANGED_FLAGS,NULL); #endif *combo + newitem; _current = (K_MODEM *) combo->Current(); if ( combo->Count() > 1 ) { UIW_BUTTON * button = (UIW_BUTTON *) Get( BUTTON_REMOVE ); if ( button ) { button->woFlags &= ~WOF_NON_SELECTABLE ; button->Information(I_CHANGED_FLAGS,NULL) ; } } } void K_MODEM_DIALOG::ApplyChanges( void ) { UIW_COMBO_BOX * combo = (UIW_COMBO_BOX *) Get(COMBO_NAME); K_MODEM * item = NULL; K_MODEM * newCurrent = _current ; for ( item = (K_MODEM *) _delete_list.First(); item ; item = (K_MODEM *) _delete_list.First() ) { _delete_list - item ; if (K_CONNECTOR::_userFile->ChDir("~Modems") == 0) { if (K_CONNECTOR::_userFile->DestroyObject( item->_name ) != 0) { // What went wrong? ZAF_MESSAGE_WINDOW * message = new ZAF_MESSAGE_WINDOW( "Error", "EXCLAMATION", ZIL_MSG_OK, ZIL_MSG_OK, "Unable to remove modem \"%s\": errorno %d", item->_name, K_CONNECTOR::_userFile->storageError ) ; message->Control(); delete message ; return; } K_CONNECTOR::_userFile->ChDir("~"); } delete item; } K_CONNECTOR::_userFile->Save(2) ; CopyValuesToCurrent(); SourceList->Destroy(); UI_EVENT SubtractObject(S_SUBTRACT_OBJECT); for ( item = (K_MODEM *) _modem_list->First(); item ; item = (K_MODEM *) _modem_list->First() ) { item->_dialog = NULL; if ( strcmp( item->_name, item->DataGet() ) ) strncpy( item->_name, item->DataGet(), 60 ); if (K_CONNECTOR::_userFile->ChDir("~Modems") == 0) { ZIL_STORAGE_OBJECT _fileObj( *K_CONNECTOR::_userFile, item->_name, ID_K_MODEM, UIS_OPENCREATE | UIS_READWRITE ) ; item->Store( item->_name, K_CONNECTOR::_userFile, &_fileObj, ZIL_NULLP(UI_ITEM), ZIL_NULLP(UI_ITEM)) ; if ( K_CONNECTOR::_userFile->storageError ) { // What went wrong? ZAF_MESSAGE_WINDOW * message = new ZAF_MESSAGE_WINDOW( "Error", "EXCLAMATION", ZIL_MSG_OK, ZIL_MSG_OK, "Unable to Write modem \"%s\": errorno %d", item->_name, K_CONNECTOR::_userFile->storageError ) ; message->Control() ; delete message ; } K_CONNECTOR::_userFile->ChDir("~"); } SubtractObject.data = item; _modem_list->Event(SubtractObject); *SourceList + item; if ( item == newCurrent ) SourceList->SetCurrent( item ); } } K_MODEM_DIALOG::~K_MODEM_DIALOG( void ) { } EVENT_TYPE K_MODEM_DIALOG::Event( const UI_EVENT & event ) { EVENT_TYPE ccode = event.type ; switch ( event.type ) { case OPT_MODEM_HELP: helpSystem->DisplayHelp( windowManager, HELP_MODEMS ) ; break; case OPT_MODEM_SPEAKER: { UIW_BUTTON * button = ( UIW_BUTTON * ) Get( CHECK_SPEAKER ) ; UIW_SCROLL_BAR * slider = (UIW_SCROLL_BAR *) Get( SLIDER_VOLUME ); if ( FlagSet(button->woStatus, WOS_SELECTED) ) slider->woFlags &= ~WOF_NON_SELECTABLE ; else slider->woFlags |= WOF_NON_SELECTABLE ; slider->Information(I_CHANGED_FLAGS,NULL) ; break; } case OPT_MODEM_MODIFY: { if ( _current ) { K_MODEM_CONFIG * config = new K_MODEM_CONFIG( this, _current ); config->Control(); delete config; } break; } case OPT_MODEM_OK: { *windowManager - this ; ApplyChanges() ; break; } case OPT_MODEM_OBJECT: { UIW_COMBO_BOX * combo = (UIW_COMBO_BOX *) Get(COMBO_NAME); CopyValuesToCurrent(); _current = (K_MODEM *) combo->Current(); CopyValuesFromCurrent(); break; } case OPT_MODEM_ADD: { K_MODEM_NAME * newname = new K_MODEM_NAME( this ); newname->Control(); delete newname; break; } case OPT_MODEM_REMOVE: { UIW_COMBO_BOX * combo = (UIW_COMBO_BOX *) Get(COMBO_NAME); if ( _current && combo->Count() > 1 ) { if ( connector->IsModemInUse(_current->_name) ) { ZAF_MESSAGE_WINDOW * message = new ZAF_MESSAGE_WINDOW( "Error", "EXCLAMATION", ZIL_MSG_OK, ZIL_MSG_OK, "Modem \"%s\" is in use. It may not be removed.", _current->_name ) ; message->Control(); delete message ; break; } UI_EVENT ReDisplay(S_REDISPLAY) ; UI_EVENT Create(S_CREATE) ; UI_EVENT SubtractObject(S_SUBTRACT_OBJECT) ; K_MODEM * deletion = _current; SubtractObject.data = _current; //*combo - _current ; combo->Event(SubtractObject); _modem_list->Event(ReDisplay); combo->Event( Create ); combo->Event( ReDisplay ); #ifdef __OS2__ combo->Information(I_CHANGED_FLAGS,NULL); #endif _current = (K_MODEM *) combo->Current(); CopyValuesFromCurrent(); _delete_list + deletion ; if ( combo->Count() <= 1 ) { UIW_BUTTON * button = (UIW_BUTTON *) Get( BUTTON_REMOVE ); if ( button ) { button->woFlags |= WOF_NON_SELECTABLE ; button->Information(I_CHANGED_FLAGS,NULL) ; } } } break; } case OPT_MODEM_IS_TAPI: case OPT_MODEM_TYPE: { /* The user may have selected a new modem type */ /* Reset the modem commands */ UIW_COMBO_BOX * combo = (UIW_COMBO_BOX *) Get( COMBO_TYPE ); ZIL_ICHAR * type = combo->DataGet(); if ( strcmp(type,_current->_type) ) { MDMINF * mdminf = FindMdmInf( type ); CopyMdmInfToModem( mdminf, _current ); } #if defined(WIN32) UIW_BUTTON * button = (UIW_BUTTON *) Get( BUTTON_MODIFY ); //combo = (UIW_COMBO_BOX *) Get(COMBO_PORT); //ZIL_ICHAR port[61]; //strcpy(port,combo->DataGet()); if ( !strcmp("tapi",type) ) { InitTapiPortList(); button->woFlags |= WOF_NON_SELECTABLE; } else { InitPortList(); button->woFlags &= ~WOF_NON_SELECTABLE; } button->Information( I_CHANGED_FLAGS, NULL ); //combo->DataSet(port); #endif break; } default: ccode = UIW_WINDOW::Event(event); } return ccode ; } void K_MODEM_DIALOG:: InitFlowList() { UIW_VT_LIST * list = (UIW_VT_LIST *) Get( LIST_FLOW ) ; *list + new UIW_BUTTON( 0,0,0,"None",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"Xon/Xoff",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"Rts/Cts",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"Auto",BTF_NO_3D, WOF_NO_FLAGS ); } void K_MODEM_DIALOG:: InitParityList() { UIW_VT_LIST * list = (UIW_VT_LIST *) Get( LIST_PARITY ) ; *list + new UIW_BUTTON( 0,0,0,"None",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"Space",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"Even",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"Odd",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"Mark",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"Space_8bit",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"Even_8bit",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"Odd_8bit",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"Mark_8bit",BTF_NO_3D, WOF_NO_FLAGS ); } void K_MODEM_DIALOG:: InitStopBitsList() { UIW_VT_LIST * list = (UIW_VT_LIST *) Get( LIST_STOPBITS ) ; *list + new UIW_BUTTON( 0,0,0,"1.0",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"1.5",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"2.0",BTF_NO_3D, WOF_NO_FLAGS ); } void K_MODEM_DIALOG:: InitPortList() { UIW_VT_LIST * list = (UIW_VT_LIST *) Get( LIST_PORT ) ; UIW_COMBO_BOX * combo = (UIW_COMBO_BOX *) Get( COMBO_PORT ); list->Destroy(); for ( int i=1; i<=128; i++ ) { char buf[12]; sprintf(buf,"COM%d",i); *list + new UIW_BUTTON( 0,0,0,buf,BTF_NO_3D ); } UI_EVENT ReDisplay(S_REDISPLAY) ; UI_EVENT Create(S_CREATE) ; combo->Event( Create ); combo->Event( ReDisplay ); #ifdef __OS2__ combo->Information(I_CHANGED_FLAGS,NULL); #endif } #if defined(WIN32) void K_MODEM_DIALOG:: InitTapiPortList() { UIW_VT_LIST * list = (UIW_VT_LIST *) Get( LIST_PORT ) ; UIW_COMBO_BOX * combo = (UIW_COMBO_BOX *) Get( COMBO_PORT ); list->Destroy(); #ifndef NODIAL if ( TapiAvail ) { cktapiBuildLineTable( &tapilinetab, &_tapilinetab, &ntapiline ); for ( int i=0 ; iEvent( Create ); combo->Event( ReDisplay ); #ifdef __OS2__ combo->Information(I_CHANGED_FLAGS,NULL); #endif } #endif void K_MODEM_DIALOG:: InitModemTypeList( void ) { UIW_VT_LIST * list = (UIW_VT_LIST *) Get( LIST_TYPE ) ; for (int i=0;mdmtab[i].kwd[0];i++) { if (mdmtab[i].flgs == 0) { #ifdef WIN32 if ( mdmtab[i].kwval == n_TAPI ) { if ( TapiAvail ) { *list + new UIW_BUTTON( 0,0,0, mdmtab[i].kwd, BTF_NO_3D|BTF_SEND_MESSAGE, WOF_NO_FLAGS, ZIL_NULLF(ZIL_USER_FUNCTION), OPT_MODEM_IS_TAPI ); } } else #endif { *list + new UIW_BUTTON( 0,0,0, mdmtab[i].kwd, BTF_NO_3D|BTF_SEND_MESSAGE, WOF_NO_FLAGS, ZIL_NULLF(ZIL_USER_FUNCTION), OPT_MODEM_TYPE ); } } } } void InitSpeedList( UIW_VT_LIST * list ) { *list + new UIW_BUTTON( 0,0,0,"50",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"75",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"110",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"150",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"300",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"600",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"1200",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"2400",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"3600",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"4800",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"7200",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"9600",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"14400",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"19200",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"28800",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"38400",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"57600",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"76800",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"115200",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"230400",BTF_NO_3D, WOF_NO_FLAGS ) + new UIW_BUTTON( 0,0,0,"460800",BTF_NO_3D, WOF_NO_FLAGS ); } void K_MODEM_DIALOG::InitSpeedList( void ) { UIW_VT_LIST * list = (UIW_VT_LIST *) Get( LIST_SPEED ) ; ::InitSpeedList( list ) ; } K_MODEM_NAME::K_MODEM_NAME( K_MODEM_DIALOG * Parent ) : ZAF_DIALOG_WINDOW("WINDOW_NEW_MODEM",defaultStorage), _parent(Parent) { windowManager->Center(this); } EVENT_TYPE K_MODEM_NAME::Event( const UI_EVENT & event ) { EVENT_TYPE ccode = event.type ; UIW_STRING * string = NULL ; switch ( event.type ) { case OPT_DIALING_OK: { UIW_STRING * string = (UIW_STRING *) Get( FIELD_NAME ); _parent->AddModem( string->DataGet() ); *windowManager - this ; break; } default: ccode = UIW_WINDOW::Event(event); } return ccode ; } K_MODEM_NAME::~K_MODEM_NAME( void ) { } K_MODEM_CONFIG::K_MODEM_CONFIG( K_MODEM_DIALOG * Parent, K_MODEM * Modem ) : ZAF_DIALOG_WINDOW("WINDOW_MODEM_CONFIG",defaultStorage), _parent(Parent), _modem(Modem) { windowManager->Center(this); InitSpeedList(); UIW_STRING * string = (UIW_STRING *) Get( FIELD_INIT ); string->DataSet(_modem->_init_str); string = (UIW_STRING *) Get( FIELD_DIAL_MODE ); string->DataSet(_modem->_dial_mode_str); string = (UIW_STRING *) Get( FIELD_DIAL_PROMPT ); string->DataSet(_modem->_dial_mode_prompt_str); string = (UIW_STRING *) Get( FIELD_DIAL_STR ); string->DataSet(_modem->_dial_str); string = (UIW_STRING *) Get( FIELD_DC_ON ); string->DataSet(_modem->_dc_on_str); string = (UIW_STRING *) Get( FIELD_DC_OFF ); string->DataSet(_modem->_dc_off_str); string = (UIW_STRING *) Get( FIELD_EC_ON ); string->DataSet(_modem->_ec_on_str); string = (UIW_STRING *) Get( FIELD_EC_OFF ); string->DataSet(_modem->_ec_off_str); // string = (UIW_STRING *) Get( FIELD_SB_ON ); // string->DataSet(_modem->_sb_on_str); // string = (UIW_STRING *) Get( FIELD_SB_OFF ); // string->DataSet(_modem->_sb_off_str); string = (UIW_STRING *) Get( FIELD_AA_ON ); string->DataSet(_modem->_aa_on_str); string = (UIW_STRING *) Get( FIELD_AA_OFF ); string->DataSet(_modem->_aa_off_str); string = (UIW_STRING *) Get( FIELD_SP_ON ); string->DataSet(_modem->_sp_on_str); string = (UIW_STRING *) Get( FIELD_SP_OFF ); string->DataSet(_modem->_sp_off_str); string = (UIW_STRING *) Get( FIELD_VOL1 ); string->DataSet(_modem->_vol1_str); string = (UIW_STRING *) Get( FIELD_VOL2 ); string->DataSet(_modem->_vol2_str); string = (UIW_STRING *) Get( FIELD_VOL3 ); string->DataSet(_modem->_vol3_str); string = (UIW_STRING *) Get( FIELD_HUP ); string->DataSet(_modem->_hup_str); string = (UIW_STRING *) Get( FIELD_HWFC ); string->DataSet(_modem->_hwfc_str); string = (UIW_STRING *) Get( FIELD_SWFC ); string->DataSet(_modem->_swfc_str); string = (UIW_STRING *) Get( FIELD_NOFC ); string->DataSet(_modem->_nofc_str); string = (UIW_STRING *) Get( FIELD_PULSE ); string->DataSet(_modem->_pulse_str); string = (UIW_STRING *) Get( FIELD_TONE ); string->DataSet(_modem->_tone_str); string = (UIW_STRING *) Get( FIELD_IGNORE_DIALTONE ); string->DataSet(_modem->_ignore_dial_tone_str); string = (UIW_STRING *) Get( FIELD_ESCAPE ); ZIL_ICHAR itoabuf[40] ; itoabuf[0] = _modem->_escape_char; itoabuf[1] = '\0'; string->DataSet(itoabuf); UIW_COMBO_BOX * combo = (UIW_COMBO_BOX *) Get( COMBO_MAX_SPEED ); itoa( _modem->_max_speed, itoabuf, 10 ) ; combo->DataSet(itoabuf); UIW_BUTTON * button = (UIW_BUTTON *) Get( CHECK_AT ); if ( _modem->_at ) button->woStatus |= WOS_SELECTED ; else button->woStatus &= ~WOS_SELECTED ; button->Information(I_CHANGED_FLAGS,NULL); button = (UIW_BUTTON *) Get( CHECK_V25 ); if ( _modem->_v25 ) button->woStatus |= WOS_SELECTED ; else button->woStatus &= ~WOS_SELECTED ; button->Information(I_CHANGED_FLAGS,NULL); button = (UIW_BUTTON *) Get( CHECK_SB ); if ( _modem->_sb ) button->woStatus |= WOS_SELECTED ; else button->woStatus &= ~WOS_SELECTED ; button->Information(I_CHANGED_FLAGS,NULL); button = (UIW_BUTTON *) Get( CHECK_EC ); if ( _modem->_ec ) button->woStatus |= WOS_SELECTED ; else button->woStatus &= ~WOS_SELECTED ; button->Information(I_CHANGED_FLAGS,NULL); button = (UIW_BUTTON *) Get( CHECK_DC ); if ( _modem->_dc ) button->woStatus |= WOS_SELECTED ; else button->woStatus &= ~WOS_SELECTED ; button->Information(I_CHANGED_FLAGS,NULL); button = (UIW_BUTTON *) Get( CHECK_HW ); if ( _modem->_hw ) button->woStatus |= WOS_SELECTED ; else button->woStatus &= ~WOS_SELECTED ; button->Information(I_CHANGED_FLAGS,NULL); button = (UIW_BUTTON *) Get( CHECK_SW ); if ( _modem->_sw ) button->woStatus |= WOS_SELECTED ; else button->woStatus &= ~WOS_SELECTED ; button->Information(I_CHANGED_FLAGS,NULL); button = (UIW_BUTTON *) Get( CHECK_KS ); if ( _modem->_ks ) button->woStatus |= WOS_SELECTED ; else button->woStatus &= ~WOS_SELECTED ; button->Information(I_CHANGED_FLAGS,NULL); button = (UIW_BUTTON *) Get( CHECK_TB ); if ( _modem->_tb ) button->woStatus |= WOS_SELECTED ; else button->woStatus &= ~WOS_SELECTED ; button->Information(I_CHANGED_FLAGS,NULL); } void K_MODEM_CONFIG::InitSpeedList( void ) { UIW_VT_LIST * list = (UIW_VT_LIST *) Get( LIST_MAX_SPEED ) ; ::InitSpeedList( list ) ; } void K_MODEM_CONFIG::ApplyChanges() { UIW_STRING * string = (UIW_STRING *) Get( FIELD_INIT ); strncpy(_modem->_init_str,string->DataGet(),61); string = (UIW_STRING *) Get( FIELD_DIAL_MODE ); strncpy(_modem->_dial_mode_str,string->DataGet(),61); string = (UIW_STRING *) Get( FIELD_DIAL_PROMPT ); strncpy(_modem->_dial_mode_prompt_str,string->DataGet(),61); string = (UIW_STRING *) Get( FIELD_DIAL_STR ); strncpy(_modem->_dial_str,string->DataGet(),61); string = (UIW_STRING *) Get( FIELD_DC_ON ); strncpy(_modem->_dc_on_str,string->DataGet(),61); string = (UIW_STRING *) Get( FIELD_DC_OFF ); strncpy(_modem->_dc_off_str,string->DataGet(),61); string = (UIW_STRING *) Get( FIELD_EC_ON ); strncpy(_modem->_ec_on_str,string->DataGet(),61); string = (UIW_STRING *) Get( FIELD_EC_OFF ); strncpy(_modem->_ec_off_str,string->DataGet(),61); // string = (UIW_STRING *) Get( FIELD_SB_ON ); // strncpy(_modem->_sb_on_str,string->DataGet(),61); // string = (UIW_STRING *) Get( FIELD_SB_OFF ); // strncpy(_modem->_sb_off_str,string->DataGet(),61); string = (UIW_STRING *) Get( FIELD_AA_ON ); strncpy(_modem->_aa_on_str,string->DataGet(),61); string = (UIW_STRING *) Get( FIELD_AA_OFF ); strncpy(_modem->_aa_off_str,string->DataGet(),61); string = (UIW_STRING *) Get( FIELD_SP_ON ); strncpy(_modem->_sp_on_str,string->DataGet(),61); string = (UIW_STRING *) Get( FIELD_SP_OFF ); strncpy(_modem->_sp_off_str,string->DataGet(),61); string = (UIW_STRING *) Get( FIELD_VOL1 ); strncpy(_modem->_vol1_str,string->DataGet(),61); string = (UIW_STRING *) Get( FIELD_VOL2 ); strncpy(_modem->_vol2_str,string->DataGet(),61); string = (UIW_STRING *) Get( FIELD_VOL3 ); strncpy(_modem->_vol3_str,string->DataGet(),61); string = (UIW_STRING *) Get( FIELD_HUP ); strncpy(_modem->_hup_str,string->DataGet(),61); string = (UIW_STRING *) Get( FIELD_HWFC ); strncpy(_modem->_hwfc_str,string->DataGet(),61); string = (UIW_STRING *) Get( FIELD_SWFC ); strncpy(_modem->_swfc_str,string->DataGet(),61); string = (UIW_STRING *) Get( FIELD_NOFC ); strncpy(_modem->_nofc_str,string->DataGet(),61); string = (UIW_STRING *) Get( FIELD_PULSE ); strncpy(_modem->_pulse_str,string->DataGet(),61); string = (UIW_STRING *) Get( FIELD_TONE ); strncpy(_modem->_tone_str,string->DataGet(),61); string = (UIW_STRING *) Get( FIELD_IGNORE_DIALTONE ); strncpy(_modem->_ignore_dial_tone_str,string->DataGet(),61); string = (UIW_STRING *) Get( FIELD_ESCAPE ); _modem->_escape_char = (string->DataGet())[0]; UIW_COMBO_BOX * combo = (UIW_COMBO_BOX *) Get( COMBO_MAX_SPEED ); ZIL_ICHAR * value = combo->DataGet(); _modem->_max_speed = atoi(value); combo = (UIW_COMBO_BOX *) _parent->Get( COMBO_SPEED ); combo->DataSet( value ); _modem->_at = FlagSet(Get( CHECK_AT )->woStatus, WOS_SELECTED ); _modem->_v25 = FlagSet(Get( CHECK_V25 )->woStatus, WOS_SELECTED ); _modem->_sb = FlagSet(Get( CHECK_SB )->woStatus, WOS_SELECTED ); _modem->_ec = FlagSet(Get( CHECK_EC )->woStatus, WOS_SELECTED ) || _modem->_ec_on_str[0]; _modem->_dc = FlagSet(Get( CHECK_DC )->woStatus, WOS_SELECTED ) || _modem->_dc_on_str[0]; _modem->_hw = FlagSet(Get( CHECK_HW )->woStatus, WOS_SELECTED ) || _modem->_hwfc_str[0]; _modem->_sw = FlagSet(Get( CHECK_SW )->woStatus, WOS_SELECTED ) || _modem->_swfc_str[0]; _modem->_ks = FlagSet(Get( CHECK_KS )->woStatus, WOS_SELECTED ); _modem->_tb = FlagSet(Get( CHECK_TB )->woStatus, WOS_SELECTED ); if ( _modem->_ec ) { _modem->_correction = 1; UIW_BUTTON * button = (UIW_BUTTON *) _parent->Get( CHECK_ERROR_CORRECTION ); button->woStatus |= WOS_SELECTED; button->Information( I_CHANGED_FLAGS, NULL ); } if ( _modem->_dc ) { _modem->_compression = 1; UIW_BUTTON * button = (UIW_BUTTON *) _parent->Get( CHECK_COMPRESSION ); button->woStatus |= WOS_SELECTED; button->Information( I_CHANGED_FLAGS, NULL ); } if ( _modem->_sb ) { _modem->_speed_match = 0; UIW_BUTTON * button = (UIW_BUTTON *) _parent->Get( CHECK_SPEED_MATCHING ); button->woStatus &= ~WOS_SELECTED; button->Information( I_CHANGED_FLAGS, NULL ); } } EVENT_TYPE K_MODEM_CONFIG::Event( const UI_EVENT & event ) { EVENT_TYPE ccode = event.type ; UIW_STRING * string = NULL ; switch ( event.type ) { case OPT_MODEM_CFG_OK: { *windowManager - this ; ApplyChanges(); break; } case OPT_MODEM_CFG_HELP: helpSystem->DisplayHelp( windowManager, HELP_MODEM_CMDS ) ; break; default: ccode = UIW_WINDOW::Event(event); } return ccode ; } K_MODEM_CONFIG::~K_MODEM_CONFIG( void ) { }