; File HOST.KSC - "Host mode" script for K-95.
;
; Assumes client is ANSI or VT100 terminal with 24 lines.
; Protocol operations use APC for automatic up/download,
; but don't require it.
;
;   Works on serial and TCP/IP Telnet connections.
;   Assumes the connection is already made.  Designed to be
;   started from HOSTMODE.KSC, which waits for the desired
;   type of connection to come in.
;
; Kermit 95 1.1.17 or later is required.
;
; Copyright (C) 1996, 1997, 1998, 1999, 2001
; Trustees of Columbia University in the City of New York.
; All rights reserved.   Authors:  F. da Cruz, C. Gianone, J. Altman.
;
; Version 1.00: February 1996 for 1.1.3.
; Version 1.01: 8 June 1997 for 1.1.12:
;  . Add "set transmit echo off".
;  . Change "clear device-and-input" to "clear input" in GETMENUITEM.
; Version 1.02:
;  . Fix problem with requests to send file groups
; Version 1.03: 9 July 1998 for 1.1.18
;  . Fix conflict with FAIL command added in 1.1.17
;  . Fix potential error if _mypriv is non-numeric
;  . Make sure Autodownload is OFF
;  . Add SET TELNET REMOTE-ECHO commands
; Version 1.04 2 September 1999 for 1.1.18
;  . Disable TELOPT commands
;  . Add support for Telnet Authentication
; Version 1.05 6 April 2000 for 1.1.20
;  . Change default locations to reference \v(exedir); not \v(startup)
; Version 1.06 11 Oct 2001 for 1.1.20
;  . Fixed FAIL to STOP rathr than EXIT and changed its name to BAIL.
;  . Modernized command continuation and macro definition syntax.

def _VERSION 1.06 ; Version of this script

; MACRO DEFINITIONS
;
; HOSTLOG writes actions to the screen and to the transaction log.
; See subsequent redefinitions below.
;
def HOSTLOG echo \v(time) - \fcontents(\%1)

; BOXMSG prints an attention-getting message on the console screen.
;
def BOXMSG {
   asg \%9 \frepeat(=,\flen(\%1))
   ec \%9, ec \%1, ec \%9
   beep
}

; LOCK and UNLOCK are for use when updating the user database file,
; to prevent people from writing over each other's changes.
;
def UNLOCK {
  if not def _locked end 0
  if exist \m(_lockfile) delete \m(_lockfile)
  undef _locked
  hostlog {Userfile UNLOCKED}
  end 0
}

def LOCK {
  if def _locked end 1
  if exist \m(_lockfile) end 1
  open write \m(_lockfile)
  if failure end 1
  writeln file \m(_username)
  if failure end 1
  close write
  if failure end 1
  def _locked 1
  hostlog {Userfile LOCKED}
  end 0
}

; SPLIT and GETFIELDS are for parsing user database records.
;
def SPLIT {
  asg \%9 \findex(_,\%1)
  asg _LEFT \fbreak(\%1,_)
  asg _RIGHT \fsubstr(\%1,\%9+1)
}

def GETFIELDS {
  split {\%1}
  asg U_ID \m(_LEFT)
  split {\m(_RIGHT)}
  asg U_PW \m(_LEFT)
  split {\m(_RIGHT)}
  asg U_PR \m(_LEFT)
  split {\m(_RIGHT)}
  asg U_NM \m(_LEFT)
  split {\m(_RIGHT)}
  asg U_AD \m(_LEFT)
  split {\m(_RIGHT)}
  asg U_TP \m(_LEFT)
  split {\m(_RIGHT)}
  asg U_EM \m(_LEFT)
}

; Make a variable: name is first arg, value is second.
;
def MAKEVAR2 if def \%2 _assign \%1 \%2, else _assign \%1

; Make a variable from single argument NAME=VALUE
; Creates variable called "_NAME" with definition "VALUE"
;
def MAKEVAR {
  if = \findex(=,\%1,1) 0 end
  asg \%9 _\freplace(\%1,=,\32)
  makevar2 \%9
}

; BAIL handles fatal errors
;
define BAIL {
  hostlog {In \v(cmdfile) at line \v(_line)...}
  hostlog {Fatal error \v(errno) \v(errstring) - session closed}
  beep
  goto badend
}

; SAVEUSERDB saves the user database
;
define SAVEUSERDB {
  if exist \fdef(_userbak) del \fdef(_userbak)
  rename \fdef(_userfile) \fdef(_userbak)
  if failure hostlog {Warning - Failure to back up user database}
  open write \fdef(_userfile)
  xif failure {
        hostlog {Can not open \fdef(_userfile)}
        UNLOCK
        end 1 
  }
  for \%i 1 \&u[0] 1 {
    writeln file \&u[\%i]
    xif failure {
      hostlog {Error writing record \%i to \fdef(_userfile)}
      hostlog {Old version preserved as \fdef(_userbak)}
      break
    }
  }
  close write
  asg \%9 \v(status)
  if not = \%9 0 hostlog {WARNING - Failed to close \fdef(_userfile)}
  else hostlog {\fdef(_userfile) saved: \&u[0] records}
  UNLOCK
  end \%9
}

; The following code was added to accomodate the new Windows multi-user
; friendly directory layouts introduced with version 1.1.21.  We have
; check several locations for the directories that hostmode uses and
; create them in \v(appdata) if the do not exist at all.

if directory \v(exedir)USERS {
    asg _hostroot \v(exedir)
    forward FOUNDDIRS
}
if directory \v(startup)INCOMING {
    asg _hostroot \v(startup)
    forward FOUNDDIRS
}

if directory \v(appdata)USERS {
    asg _hostroot \v(appdata)
}

:FOUNDDIRS

; CONFIGURATION: Defaults in case the config file (HOST.CFG) gets lost...
;
asg _maxusers 100			; Maximum number of users in database
asg _inactivity 1800			; Logged-in inactivity limit (seconds)
asg _logintime 300			; Inactivity limit while logging in
asg _anonok 1				; Anonymous logins OK (0 = not OK)
asg _logging 1				; Logging enabled (0 = skip logging)
asg _dlincoming 0			; OK to download from INCOMING dir
asg _msgmax 200				; Longest message size (lines)
asg _protocol kermit			; Default file transfer protocol
asg _xfermode binary			; Default file transfer mode
asg _owner THE PROPRIETOR		; PC owner's name or company
asg _herald Welcome to K-95 Host Mode	; Main screen title
asg _public   \m(_hostroot)PUBLIC	; Directory users can get files from
asg _incoming \m(_hostroot)INCOMING	; Directory that users can send file to
asg _logdir   \m(_hostroot)LOGS		; Directory for host-mode logs
asg _usertree \m(_hostroot)USERS	; Root of user directory tree
asg _tmpdir   \v(tmpdir)		; Directory for temp files
if not def _tmpdir asg _tmpdir \m(_hostroot)TMP
asg _userfile \m(_usertree)/USERS.DAT	 ; User database file
asg _greeting \m(_usertree)/GREETING.TXT ; Message/greeting text filename
asg _helpfile \m(_usertree)/HOSTMODE.TXT ; Host-mode help file
asg _msgfile  \m(_usertree)/MESSAGES.TXT ; Messages for proprietor

; Now read the configuration file.
; Note that the name and subdirectory are hardwired.
;
asg _configfile \freplace(\m(_hostroot)host.cfg,/,\\)
asg _mypriv 0

if not exist \m(_configfile) forward noconfig
open read \m(_configfile)
if failure forward noconfig
while true { read \%a, if failure break, makevar \%a }

:NOCONFIG

; END OF CONFIGURATION SECTION

dcl \&u[\m(_maxusers)]

if not def _lockfile asg _lockfile \m(_usertree)/USERS.LCK

if not exist \m(_userfile) -
  if not eq "\m(_anonok)" "1" -
    stop 1 Fatal - User database not found and guest logins are disabled.

asg _userbak \freplace(\m(_userfile),.DAT,.BAK)	; Name of backup file

; CD to where the user directories are.
;
cd \m(_usertree)
if failure stop 1 Fatal - Can't change directory to "\m(_usertree)"

; And then CD to its parent.
;
cd ..
if failure stop 1 Fatal - Can't change directory to "\m(_usertree)/.."

asg _startdir \v(dir)			; Host-mode "home" directory.

; Create needed directories if they don't exist.
;
if not directory \m(_incoming) mkdir \m(_incoming)
if not directory \m(_incoming) stop 1 Fatal - no INCOMING directory

if not directory \m(_public) mkdir \m(_public)
if not directory \m(_public) stop 1 Fatal - no PUBLIC directory

if not directory \m(_usertree) mkdir \m(_usertree)
if not directory \m(_usertree) stop 1 Fatal - no USERS directory

if not directory \m(_tmpdir) mkdir \m(_tmpdir)
if not directory \m(_tmpdir) stop 1 Fatal - no TMP directory

if eq "\m(_logging)" "1" -
  if not dir \m(_logdir) mkdir \m(_logdir) ; Not fatal if this fails

if exist \m(_msgfile) boxmsg {You have messages in \m(_msgfile)!}

; SETTINGS...
;
set input echo off			; Keep host PC screen clean
set exit warning off			; ...
set file display quiet			; ...
set case off				; Ignore case in string comparisons 
set delay 1				; Delay in starting file transfers
set file type binary			; Transfer mode is binary by default
set transmit prompt 0			; No line turnaround on TRANSMIT
set transmit linefeed on		; Keep linefeeds when transmitting
set transmit echo off                   ; No echo during TRANSMIT
set file char cp437			; For PC-format text files

set file names converted		; No weird stuff in filenames
set receive pathnames off		; Strip pathnames from incoming files
set send pathnames off			; and outbound pathnames too
set file collision overwrite		; Overwrite incoming files by default

set input autodownload off
set terminal autodownload off
if >= \v(xversion) 1118 { set telnet remote-echo off }

if < \v(xversion) 1118 {
 ; If we are a Telnet server we need to control the echoing ourselves.
 ;
 if not = \findex(tcp,\v(connection),1) 1 forward NOTELOPT
 ;
 ; Ex-post-facto Telnet "negotiations" to undo whatever might have been
 ; negotiated already.  K95 normally is a client, but now it is a server.
 ;
 telopt will echo			; I must echo
 if failure bail			; Make sure this does not fail
 telopt dont echo			; You must not echo
 telopt will sga			; Suppress Go-Ahead
 telopt wont ttype			; No terminal type negotiations
 telopt wont naws			; No screen-size negotiations
}

:NOTELOPT
def ERROR msg {\%1}, sleep 2, def _status 1, goto main
def FATAL msg {Fatal - {\%1}}, sleep 2, fail

hostlog {\v(date) - Start host script \v(cmdfil)}
hostlog {Current directory: \freplace(\v(dir),\\,/)}

; Macros for screen formatting using VT100/ANSI escape sequences

define clr output \27[H\27[2J, if failure bail   ; Clear screen
define cur output \27[\%1;\%2H, if failure bail  ; Position the cursor
define atp cur \%1 \%2, out \%3, if failure bail ; Print text at cursor pos
define cleol out \27[K, if failure bail          ; Clear to end of line

; Returns basename of DOS/Windows-format filename argument \%1;
; that is, the filename stripped of disk letter and/or directory path, if any.
;
define BASENAME {
  asg \%9 \frindex(:,\%1)
  asg \%8 \frindex(/,\%1)
  asg \%7 \frindex(\\,\%1)
  asg \%6 \fmax(\%9,\%8)
  asg \%6 \fmax(\%7,\%6)
  return \fsubstr(\%1,\%6+1)
}

; Print message in message area - line \%M column \%C
define MSG cur \%M \%C, cleol, if def \%1 out \fcont(\%1)

; The next two are used with "Leave a message".
; \%k is the message line number, global, don't use for anything else.
;
def ADDLINE incr \%k, asg \&a[\%k] \fcontents(\%1)
def NEWSCREEN def \%L 1, clr

; Erases a character on the input line and from the input variable \%n.
;
define BS {
  if not > \flen(\%n) 0 end 0
  asg \%n \fsubstr(\%n,1,\flen(\%n)-1)
  decr \%p, out \27[D, cleol, end 0
}

; GETMENUITEM reads a number into \%n, using the echo line, \%L.
; The argument (\%1) is the label to jump to if the menu needs to be repainted.
; The minimum value is 1, the maximum value is the second argument, \%2.
; The prompt is "Enter choice: ".
;
define GETMENUITEM {
  atp \%L \%C {Enter choice: }
:NEW
  asg \%p \feval(\%C+14)
  asg \%q \%p
  def \%n
:INLOOP1
  clear input
  cur \%L \%p
  cleol
  input \m(_inactivity)
  if failure bail
  if eq "" "\v(inchar)" goto inloop1
  asg \%9 \fcode(\v(inchar))
  if = \%9   9 asg \%9 32
  if = \%9 127 asg \%9 8
  if = \%9   8 { bs, goto inloop1 }
  if = \%9  21 { cur \%L \%q, cleol, asg \%p \%q, asg \%n, goto inloop1 }
  if = \%9   3 goto main
  if = \%9  12 goto \%1
  if not < \%9 32 forward graphic
  if not def \%n goto inloop1
  forward gotit
:GRAPHIC
  atp \%L \%p \v(inchar)
  incr \%p
  if eq \%9 32 { if def \%n forward GOTIT, else goto inloop1 }
  if not numeric \v(inchar) { msg {"\v(inchar)" - Not a number}, goto new }
  if not def \%n asg \%n 0
  asg \%n \feval(10 * \%n + \v(inchar))
  msg
  goto inloop1
:GOTIT
  msg {Your choice: \%n}
  if not def \%n goto \%1
  if not numeric \%n goto \%1
  if > \%n 0 if not > \%n \%2 end 0
  msg {\%n - Out of range}
  goto new
}

; INTEXT reads a line of text from user on the input line, \%L, allows editing
; with Backspace or Del (erase characters), Ctrl-U (erase line), etc.
; Can be interrupted with Ctrl-C if _ctrlc is defined (it should be defined
; as a help string to be printed).
;
; Terminates on space or any control character except BS, Del, or Ctrl-U.
; The techniques used for reading and echoing characters are designed to work
; on both serial and Telnet connections, even whe Telnet echoing is
; misnegotiated.
;
; Argument 1 is the input (echo) line number.
; Argument 2 is the prompt.
; Argument 3 is 32 to break on space or less, 31 to break only on control 
;  chars (use 32 to read a word, use 31 to read a line of text).
; Argument 4, if included, is the timeout value.
; Argument 5, if included, is a char to echo in place of what was typed.
;
; Returns:
;   0 on success with \%n set to the text that was input.
;   1 if Ctrl-C was typed
;
define INTEXT {
  if not def \%3 asg \%3 32
  if not def \%4 asg \%4 \m(_inactivity)
  if def \%5 if > \flen(\%5) 1 asg \%5 \fsubstr(\%5,1,1)
  def \%n
  asg \%L \%1
  asg \%p \feval(\flen(\%2)+\%C)
  asg \%q \%p
  atp \%L \%C {\%2}
  if def _ctrlc atp \feval(\%L+1) \%C {\m(_ctrlc)}
:INLOOP2
  cur \%L \%p
  cleol
  input \%4
  if failure bail
  if eq "\v(inchar)" "" goto inloop2
  asg \%9 \v(inchar)
  asg \%8 \fcode(\v(inchar))
  if = \%8 3 if def _ctrlc end 1
  if = \%8   9 { asg \%8 32, asg \%9 \32 }
  if = \%8   8 { bs, goto inloop2 }
  if = \%8 127 { bs, goto inloop2 }
  if = \%8  21 {
    cur \%L \%q, cleol, asg \%p \%q, asg \%n, goto inloop2
  }
  if > \%8 \%3 { 
      asg \%n \fcontents(\%n)\fcontents(\%9)
      if def \%5 atp \%L \%p \%5
      else atp \%L \%p \fcont(\%9)
      incr \%p
      goto inloop2
  }
  if eq "" "\%n" goto inloop2
  end 0
}

; Displays a text file on the user's screen
;
def DISPLAY {
  hostlog {Typing \%1}
  asg \%9 \v(ftype)
  set file type text
  output \13\10\10
  transmit \%1
  asg _status \v(status)
  set file type \%9
  out \10\13Use scrollback to view any text that scrolled off the screen.
  out \10\13Press any key to continue...
  input \m(_inactivity)
  end 0
}

;+------------------------------------------------------------------------
; LOGIN procedure
;

asg \%C 1     ; Left margin column for login procedure.
asg \%M 6     ; Row for messages.
undef _ctrlc  ; Ctrl-C disabled during login process!
undef _locked

hostlog {Connection from \v(line)}
clr

atp 1 1 {K-95 Login - Initializing...}

if < \v(xversion) 1118 { 
  msleep 2000				; Wait for TELNET option replies
  clear device-buffer			; and then clear them out
}

hostlog {Auth State = [\v(authstate)]}
hostlog {Auth Name  = [\v(authname)]}
hostlog {Auth Type  = [\v(authtype)]}
hostlog {User name  = [\v(user)]}

if eq "\v(authstate)" "valid" {
  asg _username \v(user)
  def ok 0
  if not exist \m(_userfile) forward AUTHBAD
  open read \m(_userfile)
  if failure forward AUTHBAD
:AUTHLOOP
  read \%a
  if failure forward AUTHDONE
  getfields {\%a}
  if not eq "\m(U_ID)" "\m(_username)" goto AUTHLOOP
  def ok 1
:AUTHDONE
  close read
  if > \m(ok) 0 forward AUTHGOOD
:AUTHBAD
  hostlog {Access denied "\m(_username)"}
  undef _password
  if count goto again
  msg {Access denied - hanging up}
  incr \%M
  msg
  hostlog {Invalid user - access denied}
  bail
:AUTHGOOD
  undef _password
  asg _myname \fdef(U_NM)
  asg _mypriv \m(U_PR)
  if not numeric \m(_mypriv) asg _mypriv 0
  msg {\m(_username) authenticated by \v(authtype)}
  beep
  if >= \v(xversion) 1118 { set telnet remote-echo on }
  undef noecho
  forward LOGGEDIN
}

if eq "\v(authstate)" "user" {
  asg _username \v(user)
  forward GETPASSWD
}

set count 3				; Allow three tries to log in
:AGAIN					; Login retry loop
clr
atp 1 1 {K-95 Login}
if < \v(count) 3 { msg {Access denied}, sleep 3 }
def \%L 1
define noecho
if >= \v(xversion) 1118 { set telnet remote-echo on }
clear device-buffer			; Don't allow typeahead
intext 3 {Username: } 32 90
if failure bail
asg _username \%n
if not eq "\m(_anonok)" "1" forward GETPASSWD
if not eq "\m(_username)" "guest" forward GETPASSWD

msg					; GUEST user
asg _myname {Anonymous Guest}
asg _mypriv 0
msg
beep
if >= \v(xversion) 1118 { set telnet remote-echo on }
undef noecho
forward LOGGEDIN

:GETPASSWD
def noecho on
if >= \v(xversion) 1118 { set telnet remote-echo off }
clear device-buffer
intext 4 {Password: } 32 90 *
if failure bail
asg _password \f.oox(\%n)
asg \%n

:CHECKPASSWD
  def ok 0
  if not exist \m(_userfile) forward BAD
  open read \m(_userfile)
  if failure forward BAD
:PWLOOP
  read \%a
  if failure forward PWDONE
  getfields {\%a}
  if not eq "\m(U_ID)" "\m(_username)" goto PWLOOP
  if not eq "\m(U_PW)" "\m(_password)" goto PWLOOP
  def ok 1
:PWDONE
  close read
  if > \m(ok) 0 forward good
:BAD
  hostlog {Access denied "\m(_username)"}
  undef _password
  if count goto again
  msg {Access denied - hanging up}
  incr \%M
  msg
  hostlog {Incorrect password - access denied}
  bail
:GOOD
  undef _password
  asg _myname \fdef(U_NM)
  asg _mypriv \m(U_PR)
  if not numeric \m(_mypriv) asg _mypriv 0
  msg
  beep
  if >= \v(xversion) 1118 { set telnet remote-echo on }
  undef noecho

;+------------------------------------------------------------------------+
; Get here when logged in.

:LOGGEDIN

; Create Transaction log with unique name "<username>_<julian-date>_<time>.log"
;
if eq "\m(_logging)" "1" {
  log transactions \m(_logdir)/\m(_username)_\v(ndate)_\v(ntime).log
  if failure hostlog {Warning - can't create log file}
  else def HOSTLOG { echo \v(time) - \fcont(\%1)
    writeln trans \v(time) - \fcont(\%1) }
}
hostlog {Login by \m(_username) (\m(_myname))}

if exist \m(_greeting) display \m(_greeting)

:CHKANON ; Check for anonymous GUEST login
  if not eq "\m(_username)" "guest" forward USERCD
  cd \m(_public)
  asg _current PUBLIC
  undef _userdir
  forward START

:USERCD ; Create user's directory if necessary and then CD to it.

asg _userdir \m(_usertree)/\m(_username)
if not directory \m(_userdir) {
  hostlog {Creating \m(_userdir)}
  mkdir \m(_userdir)
  if failure fatal {Unable to create your directory}
}
cd \m(_userdir)
if failure fatal {Unable to access your directory}

asg _current USER

:START
  dcl \&s[2]            ; Status messages
  def \&s[0] OK
  def \&s[1] FAILED
  def \&s[2] UNKNOWN

  dcl \&p[5]            ; Protocol names
  def \&p[1] kermit
  def \&p[2] zmodem
  def \&p[3] ymodem
  def \&p[4] ymodem-g
  def \&p[5] xmodem

  define \%C 20 ; Left margin column for menu
  hostlog {Enter main menu}
  undef _csave
  undef _inmail
  undef _status
  set protocol \m(_protocol)
  set file type \m(_xfermode)

  def _priv_cd  1
  def _priv_dos 2
  def _idle_limit (none)
  if not numeric _inactivity asg _inactivity 1800
  if > \m(_inactivity) 0 asg _idle_limit \m(_inactivity)

:MAIN
  if def _locked unlock
  if def _inmail { hostlog {Message canceled}, undef _inmail }
  dcl \&a[0]
  def _ctrlc (Ctrl-C to return to main menu) ; Ctrl-C enabled now
  if def _csave { asg \%C \m(_csave), def _csave } ; Left margin

clr
atp  1 \%C {\m(_herald) V\m(_VERSION)}
atp  3 \%C {Current directory: \freplace(\v(dir),\\,/)}
atp  4 \%C {Protocol: \v(protocol), Transfer mode: \fcaps(\v(ftype))}
if exist \m(_usertree)/\m(_username).MSG -
atp  5 \%C {Message(s) waiting...}
else atp  5 \%C {Idle limit: \m(_idle_limit) sec -- Choices:}
atp  7 \%C { 1 - Change protocol}
atp  8 \%C { 2 - Change transfer mode}
atp  9 \%C { 3 - Change directory}
atp 10 \%C { 4 - List files}
atp 11 \%C { 5 - Download files}
atp 12 \%C { 6 - Upload files}
atp 13 \%C { 7 - View a file}
atp 14 \%C { 8 - Delete files}
atp 15 \%C { 9 - Read messages}
atp 16 \%C {10 - Leave a message}
atp 17 \%C {11 - Change password}
atp 18 \%C {12 - Help}
atp 19 \%C {13 - Logout}
if not > \m(_mypriv) 1 forward NODOS
atp 20 \%C {14 - Execute a DOS command}
if def _status -
atp 24 \%C {Last command: \&s[\m(_status)]}
asg \%H 14             ; Highest menu item
asg \%L 22             ; Menu input line
forward getmenu
:NODOS                 ; DOS commands not allowed
if def _status -
atp 23 \%C {Last command: \&s[\m(_status)]}
asg \%H 13
asg \%L 21
:GETMENU
asg \%M \feval(\%L+1)  ; Message line
getmenuitem main \%H   ; Get user's choice
if eq "" "\%n| {
        hostlog {Undefined LBL_ value}
        bail
}
forward LBL_\%n        ; Go forward and handle it

;+------------------------------------------------------------------------+
; Host mode actions

:LBL_1 ; PROTOCOL
clr
atp  4 \%C {SELECT PROTOCOL}
atp  6 \%C {Current protocol: \v(protocol)}
atp  8 \%C {Choices:}
atp 10 \%C {1 - Kermit}
atp 11 \%C {2 - ZMODEM}
atp 12 \%C {3 - YMODEM}
atp 13 \%C {4 - YMODEM-G}
atp 14 \%C {5 - XMODEM}
atp 15 \%C {6 - Return to main menu}

asg \%L 17             ; Menu input line
asg \%M \feval(\%L+2)  ; Message line
getmenuitem lbl_1 6
if not = \%n 6 set protocol \&p[\%n]
asg _status \v(status)
goto main

:LBL_2 ; TRANSFER MODE
clr
atp  8 \%C {SELECT TRANSFER MODE}
atp 10 \%C {Current mode: \v(ftype)}
atp 12 \%C {Choices:}
atp 14 \%C {1 - Binary}
atp 15 \%C {2 - Text}
atp 16 \%C {3 - Return to main menu}

asg \%L 18             ; Menu input line
asg \%M \feval(\%L+2)  ; Message line
getmenuitem lbl_2 3
if = \%n 1 set file type binary
else if = \%n 2 set file type text
asg _status \v(status)
goto main

:LBL_5 ; DOWNLOAD
clr
if > \m(_mypriv) 0 forward DLOK
if eq "\m(_dlincoming)" "1" forward DLOK
if not eq "\m(_current)" "INCOMING" forward DLOK
error {Sorry - Read access to INCOMING directory not allowed.}
:DLOK
atp  4 \%C {DOWNLOAD FILES}
atp  6 \%C {Protocol:      \v(protocol)}
atp  7 \%C {Transfer mode: \v(ftype)}
atp  9 \%C {Type a single file specification.}
if eq "\v(protocol)" "XMODEM" forward DLNAME
atp 11 \%C {To select multiple files:}
atp 12 \%C {include * and/or ? in the filename.}
:DLNAME
intext \%L {File(s) to download: }
if failure goto main
if not def \%n goto main
asg \%n \fexec(basename \%n)
if not > \ffiles(\%n) 0 error {\%n - File not found}
hostlog {Sending \%n}
if eq "\v(protocol)" "kermit" apc receive
msg {Please escape back and initiate a \v(protocol) RECEIVE...}
sleep 1
send \%n
asg _status \v(status)
if = \m(_status) 0 hostlog {Send OK, \v(cps) CPS}
else hostlog {Send failed}
goto main

:LBL_6 ; UPLOAD
clr
if > \m(_mypriv) 0 forward UPLOADOK
if not eq "\m(_current)" "PUBLIC" forward UPLOADOK
atp 4 \%C {Sorry - no uploading to the PUBLIC directory.}
atp 5 \%C {Please change to the INCOMING directory or to}
atp 6 \%C {your own home directory prior to uploading.}
sleep 2
asg _status 1
goto main
:UPLOADOK
atp 4 \%C {UPLOAD FILES}
atp 6 \%C {Protocol:      \v(protocol)}
atp 7 \%C {Transfer mode: \v(ftype)}
intext \%L {File(s) to upload: }
if failure goto main
if not def \%n goto main
if not eq "\v(protocol)" "kermit" forward XYZMODEM
apc server
atp 12 \%C {Please escape back and enter SERVER mode...}
sleep 1
beep info
hostlog {Receiving \%n in \freplace(\v(dir),\\,/)}
get \%n
asg _status \v(status)
if = \m(_status) 0 hostlog {Get OK, \v(cps) CPS}
else hostlog {Get failed}
sleep 1
finish
goto main
:XYZMODEM
atp 12 \%C {Please return to your client software and instruct}
atp 13 \%C {it to send \%n using \v(protocol) protocol.}
receive
asg _status \v(status)
goto main

:LBL_7 ; TYPE
clr
if > \m(_mypriv) 0 forward TYPEOK
if not eq "\m(_current)" "INCOMING" forward TYPEOK
if eq "\m(_dlincoming)" "1" forward TYPEOK
error {Sorry - Read access to the INCOMING directory not allowed.}
:TYPEOK
atp 8 \%C {TYPE A FILE}
intext \%L {File to type: }
if failure goto main
asg \%n \fexec(basename \%n)
if not exist \%n error {\%n - File not found}
display \%n
goto main

:LBL_8 ; DELETE
clr

if > \m(_mypriv) 0 forward DELOK
if eq "\m(_current)" "USER" forward DELOK
error {Sorry - You may delete files only in your own directory.}
:DELOK
atp 8 \%C {DELETE FILES}
intext \%L {File(s) to delete: }
if failure goto main
asg \%n \fexec(basename \%n)		; Strip disk and directory
if not > \ffiles(\%n) 0 error {\%n - Not found}
delete \%n
asg _status \v(status)
goto main

:LBL_4 ; DIRECTORY
clr
if > \m(_mypriv) 0 forward DIROK
if eq "\m(_dlincoming)" "1" forward DIROK
if not eq "\m(_current)" "INCOMING" forward DIROK
error {Sorry - Read access to the INCOMING directory not allowed.}
:DIROK
atp  8 \%C {VIEW DIRECTORY LISTING}
hostlog {Sending directory listing}
cur 10 1
asg _tmpfile \m(_tmpdir)K_\v(ntime).TMP
run dir > \freplace(\m(_tmpfile),/,\\)
display \m(_tmpfile)
delete \m(_tmpfile)
goto main

:LBL_3 ; CD
clr
atp   8 \%C {CHANGE DIRECTORY}
atp  10 \%C {Current directory: \freplace(\v(dir),\\,/)}
atp  12 \%C {Choices:}
atp  14 \%C {1 - My home directory (read/write only by me)}
atp  15 \%C {2 - The PUBLIC directory (everybody can read it)}
if eq "\m(_dlincoming)" "1" -
atp  16 \%C {3 - The INCOMING directory (everybody can read and write)}
else -
atp  16 \%C {3 - The INCOMING directory (everybody can write)}

if > \m(_mypriv) 0 -
atp  17 \%C {4 - A specific directory}
atp  18 \%C {5 - Return to main menu}

asg \%L 20             ; Menu input line
asg \%M \feval(\%L+2)  ; Message line

getmenuitem LBL_3 5    ; Repaint menu at LBL_3, 5 items in menu
forward cd_\%n         ; Dispatch to chosen menu item

:CD_1 ; CD to home directory
if not def _userdir goto main		; Not for anonymous users
cd \m(_userdir)				; Real user, CD to own directory
asg _status \v(status)			; Remember status
enable send				; Uploads are allowed
set file collision ov			; OK to overwrite files
asg _current USER
goto main

:CD_2 ; CD to PUBLIC directory
cd \m(_public)				; Everybody can do this
asg _status \v(status)
if < \m(_mypriv) 1 disable send		; Sending to here not allowed
else enable send
set file collision ov			; Write over files on uploads
asg _current PUBLIC
goto main

:CD_3 ; CD to INCOMING directory
cd \m(_incoming)			; Everone can come here
asg _status \v(status)
set file collision ov			; Overwrite files on upload
asg _current INCOMING
enable send				; It's always OK to upload
goto main

; CD to a given directory.
; Note the use of \fcontents() to prevent overevaluation of backslashes.
;
:CD_4 ; CD to a specific directory
if not > \m(_mypriv) 0 error {Sorry - insufficient privilege}
intext \%L {Enter directory name: }
if failure goto LBL_3
if not def \%n goto LBL_3
if not dir \fcont(\%n) error {\%n - not a directory}
cd \fcont(\%n)
asg _status \v(status)
if > \m(_status) 0 error {Failure to change directory to "\fcont(\%n)"}
set file collision backup		; Overwrite would be dangerous here!
asg _current SPECIAL			; But RENAME is too confusing...
enable send				; I'm privileged so I can upload.
goto main

:CD_5
goto main

:LBL_9 ; CHECK / READ MESSAGES
clr
if not exist \m(_usertree)/\m(_username).MSG forward NOMSGS
display \m(_usertree)/\m(_username).MSG

:MSGDISP
clr
atp  8 \%C {MESSAGE DISPOSITION}
atp 10 \%C {Choices:}
atp 12 \%C {1 - Redisplay}
atp 13 \%C {2 - Delete}
atp 14 \%C {3 - Save in MESSAGES.TXT}
atp 15 \%C {4 - Download}
atp 16 \%C {5 - Return to main menu}
asg \%L 18             ; Menu input line
asg \%M \feval(\%L+2)  ; Message line
getmenuitem msgdisp 5
forward MSG_\%n
:MSG_1
  goto lbl_9
:MSG_2
  delete \m(_usertree)/\m(_username).MSG
  asg _status \v(status)
  goto main
:MSG_3
  asg \%9 \freplace(\v(dir),\\,/)
  cd \m(_usertree)
  run copy \m(_username)\\MESSAGES.TXT+\m(_username).MSG -
    \m(_username)\\MESSAGES.TXT
  asg _status \v(status)
  cd \%9
  if = \m(_status) 0 delete \m(_usertree)/\m(_username).MSG
  goto main
:MSG_4
  hostlog {Sending \m(_usertree)/\m(_username).MSG}
  if eq "\v(protocol)" "kermit" apc receive
  msg {Please escape back and initiate a \v(protocol) RECEIVE...}
  asg \%9 \v(ftype)
  set file type text
  sleep 1
  send \m(_usertree)/\m(_username).MSG
  asg _status \v(status)
  set file type \%9
  if = \m(_status) 0 {
    hostlog {Send OK, \v(cps) CPS}
    delete \m(_usertree)/\m(_username).MSG
  } else {
    hostlog {Send failed}
}
:MSG_5
goto main

:NOMSGS
atp 4 \%C {No messages for \m(_username)}
sleep 2
goto main

:LBL_10 ; LEAVE A MESSAGE
def _inmail 1
def _ctrlc (Ctrl-C to cancel message)
dcl \&a[\m(_msgmax)+5]
def \%k 0 ; Line number of entire message - see addline

clr
addline {Date: \v(date) \v(time)}
addline {From: \m(_username) (\m(_myname))}
atp 4 \%C {LEAVE A MESSAGE FOR \m(_owner)}
asg _csave \%C
def \%C 1
def \%L 6
intext \%L {Subject: } 31
if failure goto main
asg _subject \fcontents(\%n)
addline {Subject: \fcontents(\%n)}
addline {}
cur 7 1
cleol
cur 8 1
cleol
out {Type the message now.  To make a blank line, enter a space by itself.}
cur 9 1
cleol
out {Maximum lines: \m(_msgmax).  Type a period by itself on a line to finish.}
def \%L 10
cur \%L 1
cleol
def \%i 0   ; Line number of message body
set count \m(_msgmax)
:MSGLOOP
  if = \%L 22 newscreen
  incr \%L
  incr \%i
  intext \%L {\flpad(\%i,3,0)> } 31
  if failure goto main
  addline {\fcontents(\%n)}
  if eq "\%n" "." forward msgdone
  if count goto msgloop
  atp %\L 1 {Maximum lines exceeded}
:MSGDONE
incr \%L
cur \%L 1
cleol
incr \%L
if > \%L 22 newscreen
asg \%i 999

:MSGCFM ; Confirm the message
  atp \%L 1 {Type Ctrl-C to cancel or Press space bar to send: }
  input \m(_inactivity)
  if failure bail
  asg \%i \fcode(\v(inchar))
  if = \%i 3 goto main
  if = \%i 32 forward MSGSEND
  goto MSGCFM

:MSGSEND ; Send the message
open append \m(_msgfile)
if failure error {Sorry - messages not available now}
for \%i 1 \%k 1 {
  writeln file \fcontents(\&a[\%i])
}
close append
asg _status \v(status)
if = \m(_status) 0 forward MSGOK
hostlog {Problem sending message}
msg {Error sending message}
sleep 2
forward MSGEND

:MSGOK
boxmsg {Message from \m(_username): \m(_subject)}

:MSGEND
asg \%C \m(_csave)
undef _csave
undef _inmail
goto main

:LBL_11 ; CHANGE PASSWORD
clr
asg \%M 2
;
; Lock the database.
;
hostlog {User \m(_username) changing password...}
LOCK
if failure error {Busy - try again later}
open read \fdef(_userfile)
if failure error {Error - try again later}
undef _myrecord
asg \&u[0] 0
;
; Read in the entire database because the whole thing must be written
; out again when done.  The user's record number is assigned to _myrecord.
;
for \%i 1 \m(_maxusers) 1 {
  read \&u[\%i]
  if failure break
  increment \&u[0]
  getfields {\&u[\%i]}
  if eq "\m(U_ID)" "\m(_username)" asg _myrecord \%i
}
close read
if not def _myrecord error {Lookup failure}
getfields {\&u[\m(_myrecord)]}

:GETPW
intext 2 {Old Password:    } 31 \m(_inactivity) *
if not def \%n goto GETPW
if not eq "\m(U_PW)" "\f.oox(\%n)" {
  unlock
  incr \%M
  error {Sorry.}
}
intext 3 {New Password:    } 31 \m(_inactivity) *
if failure goto main
if not def \%n goto GETPW
asg \%9 \%n
intext 4 {Retype Password: } 31 \m(_inactivity) *
if failure goto main
if eq "\%n" "\%9" forward NEWPWOK
asg \%M 5
msg {Passwords do not match - please try again}
incr \%M
msg {or use Ctrl-C to return to the main menu.}
sleep 2
clr
goto GETPW

:NEWPWOK
asg \&u[\m(_myrecord)] -
\m(U_ID)_\f.oox(\%n)_\m(U_PR)_\m(U_NM)_\m(U_AD)_\m(U_TP)_\m(U_EM)
saveuserdb
if success hostlog {Password changed} 
else error {FAILED - Password not changed}
sleep 2
goto main

:LBL_12 ; HELP
clr
if not exist \m(_helpfile) error {Sorry - no help available}
display \m(_helpfile)
goto main

:LBL_13 ; EXIT
clr
hostlog {Close transaction log}
close transact
def HOSTLOG echo \v(time) - \%1
hostlog {Exit host mode}
atp 2 2 Bye!
cur 3 1
cd \m(_startdir)
hangup
;close connection
end 0

:LBL_14 ; DOS command
clr
if not > \m(_mypriv) 1 error {Sorry - insufficient privilege}
atp  2 \%C {EXECUTE A DOS COMMAND}
atp  4 \%C {Current directory: \freplace(\v(dir),\\,/)}
atp  6 \%C {CAUTION: Do NOT issue a command that:}
atp  8 \%C { 1. Might possibly require input from the PC keyboard.}
atp  9 \%C { 2. Starts a GUI program.}
atp 10 \%C { 3. Requires any type of interaction at all.}
atp 12 \%C {If you do, your session will become stuck and you will}
atp 13 \%C {have to hang up.  Only give commands that print textual}
atp 14 \%C {information on a DOS screen and then exit immediately.}
atp 15 \%C {The output will be displayed on your screen unless you}
atp 16 \%C {redirect it to a file, in which case you can download or}
atp 17 \%C {type the file afterwards from the main menu.}
while true {
  intext 19 {DOS Command: } 31
  if failure goto main
  if def \%n break
}
hostlog {DOS command "\fcontents(\%n)"}
if > \findex(>,\%n) 0 forward DOSREDIR
;
; Command is not redirected so we redirect it to a temp file
; and then display the temp file.  Pipes don't work in Windows 95.
;
asg _tmpfile \m(_tmpdir)K_\v(ntime).TMP
run \fcontents(\%n) > \freplace(\m(_tmpfile),/,\\)
; asg _status \v(status)                ; Doesn't work
asg _status 2				; Status is unknown
if exist \m(_tmpfile) {
  display \m(_tmpfile)
  delete \m(_tmpfile)
}
goto main

:DOSREDIR ; Command is already redirected, just run it.
run \fcontents(\%n)
asg _status 2
goto main

:BADEND
end 1

; End of HOST.KSC